Advances in nano research

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

The effect of nanoparticles on enhancement of the specific mechanical properties of the composite structures: A review research

  • Arani, Ali Ghorbanpour (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Farazin, Ashkan (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan) ;
  • Mohammadimehr, Mehdi (Department of Solid Mechanics, Faculty of Mechanical Engineering, University of Kashan)
  • Received : 2020.08.27
  • Accepted : 2021.01.02
  • Published : 2021.04.25
⟨ Previous Next ⟩

Abstract

In this review, composite structures are used for many industries for at least four decades. Polymeric composites are one of the important structures in the aerospace and aviation industry because of their high strength and low weight. In this comprehensive review, mechanical behaviors, physical and mechanical properties of polymeric composites, different types of reinforcements, different methods to fabricate polymeric composites, historical structural composite materials for aviation and aerospace industries, and also different methods for the characterization are reported. How to use various methods of composite preparation using different nanofillers as reinforcements and its effect on the physical properties and mechanical behavior of composites are discussed as well.

Keywords

Acknowledgement

The authors are thankful to the Iranian Nanotechnology Development Committee for their financial support and the University of Kashan for supporting this work.

References

  1. AkhavanAlavi, S.M., Mohammadimehr, M. and Edjtahed, S.H. (2019), "Active control of micro Reddy beam integrated with functionally graded nanocomposite sensor and actuator based on linear quadratic regulator method", Eur. J. Mech.-A/Solids, 74, 449-461. https://doi.org/10.1016/j.euromechsol.2018.12.008
  2. Ahmed, S., Chakrabarty, D., Mukherjee, S., Joseph, A., Jhala, G. and Bhowmik, S. (2014), "Investigation on nanoadhesive bonding of plasma modified titanium for aerospace application", Adv. Aircr. Spacecr. Sci., 1(1), 1-14. https://doi.org/10.12989/aas.2014.1.1.001
  3. Alexandre, M., Beyer, G., Henrist, C., Cloots, R., Rulmont, A., Jerome, R. and Dubois, P. (2001), "One-Pot" Preparation of Polymer/Clay Nanocomposites Starting from Na+ Montmorillonite. 1. Melt Intercalation of Ethylene- Vinyl Acetate Copolymer", Chem. Mater., 13(11), 3830-3832. https://doi.org/10.1021/cm011095m
  4. Altabey, W.A. (2017), "An exact solution for mechanical behavior of BFRP Nano-thin films embedded in NEMS", Adv. Nano Res., Int. J., 5(4), 337-358. https://doi.org/10.12989/anr.2017.5.4.337
  5. Alubel, M., Boussu, F., Bruniaux, P., Loghin, C. and Cristian, I. (2019), "Ballistic impact mechanisms - A review on textiles and fibre-reinforced composites impact responses", Compos. Struct., 223, 110966. https://doi.org/10.1016/j.compstruct.2019.110966
  6. Anvari, M., Mohammadimehr, M. and Amiri, A. (2020), "Vibration behavior of a micro cylindrical sandwich panel reinforced by graphene platelet", J. Vib. Control, 107754631989273. https://doi.org/10.1177/1077546319892730
  7. Arani, A.G., Kiani, F. and Afshari, H. (2019), "Aeroelastic analysis of laminated FG-CNTRC cylindrical panels under yawed supersonic flow", Int. J. Appl. Mech., 11(6), 1950052. https://doi.org/10.1142/S1758825119500522
  8. Arefi, M., Mohammad-Rezaei Bidgoli, E., Dimitri, R. and Tornabene, F. (2018), "Free vibrations of functionally graded polymer composite nanoplates reinforced with graphene nanoplatelets", Aerosp. Sci. Technol., 81, 108-117. https://doi.org/10.1016/j.ast.2018.07.036
  9. Arshid, E., Amir, S. and Loghman, A. (2020), "Static and dynamic analyses of FG-GNPs reinforced porous nanocomposite annular micro-plates based on MSGT", Int. J. Mech. Sci., 180, 105656. https://doi.org/10.1016/j.ijmecsci.2020.105656
  10. Aydogdu, M. (2014), "On the vibration of aligned carbon nanotube reinforced composite beams", Adv. Nano Res., Int. J., 2(4), 199-210. http://dx.doi.org/10.12989/anr.2014.2.4.199
  11. Babaeeian, M. and Mohammadimehr, M. (2020), "Investigation of the time elapsed effect on residual stress measurement in a composite plate by DIC method", Optics Lasers Eng., 128, 106002. https://doi.org/10.1016/j.optlaseng.2020.106002
  12. Bakir, N., Abbeche, K. and Panczer, G. (2017), "Experimental study of the effect of the glass fibers on reducing collapse of a collapsible soil", Geomech. Eng., Int. J., 12(1), 71-83. https://doi.org/10.12989/gae.2017.12.1.071
  13. Balazsi, K., Furko, M., Liao, Z., Fogarassy, Z., Medved, D., Zschech, E., Dusza, J. and Balazsi, C. (2020), "Graphene added multilayer ceramic sandwich (GMCS) composites: Structure, preparation and properties", J. Eur. Ceram. Soc., 40(14), 4792-4798. https://doi.org/10.1016/j.jeurceramsoc.2020.01.054
  14. Bellucci, S., Balasubramanian, C., Micciulla, F. and Rinaldi, G. (2007), "CNT composites for aerospace applications", J. Experim. Nanosci., 2(3), 193-206. https://doi.org/10.1080/17458080701376348
  15. Bilisik, K. (2017), "Two-dimensional (2D) fabrics and three-dimensional (3D) preforms for ballistic and stabbing protection: A review", Textile Res. J., 87(18), 2275-2304. https://doi.org/10.1177/0040517516669075
  16. Bouadi, A., Bousahla, A.A., Houari, M.S.A., Heireche, H. and Tounsi, A. (2018), "A new nonlocal HSDT for analysis of stability of single layer graphene sheet", Adv. Nano Res., Int. J., 6(2), 147-162. https://doi.org/10.12989/anr.2018.6.2.147
  17. Civalek, O., Dastjerdi, S. and Akgoz, B. (2020), "Buckling and free vibrations of CNT-reinforced cross-ply laminated composite plates", Mech. Based Des. Struct. Mach., 1-18. https://doi.org/10.1080/15397734.2020.1766494
  18. Di Sante, R. (2015), "Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and Applications", Sensors, 15(8), 18666-18713. https://doi.org/10.3390/s150818666
  19. Ebrahimi, F., Nouraei, M., Dabbagh, A. and Rabczuk, T. (2019), "Thermal buckling analysis of embedded graphene-oxide powder-reinforced nanocomposite plates", Adv. Nano Res., Int. J., 7(5), 293-310. https://doi.org/10.12989/anr.2019.7.5.293
  20. Farazin, A. and Mohammadimehr, M. (2020), "Nano research for investigating the effect of SWCNTs dimensions on the properties of the simulated nanocomposites: a molecular dynamics simulation", Adv. Nano Res., Int. J., 9(2), 83-90. https://doi.org/10.12989/anr.2020.9.2.083
  21. Farazin, A., Aghdam, H.A., Motififard, M., Aghadavoudi, F., Kordjamshidi, A., Saber-Samandari, S., Esmaeili, S. and Khandan, A. (2019), "A polycaprolactone bio-nanocomposite bone substitute fabricated for femoral fracture approaches: Molecular dynamic and micro-mechanical Investigation", J. Nanoanal., 6(3), 172-184. https://doi.org/10.22034/JNA.2019.668028
  22. Farazin, A., Aghadavoudi, F., Motififard, M., Saber-Samandari, S. and Khandan, A. (2020), "Nanostructure, molecular dynamics simulation and mechanical performance of PCL membranes reinforced with antibacterial nanoparticles", J. Appl. Computat. Mech. https://doi.org/10.22055/JACM.2020.32902.2097
  23. Fu, S.-Y., Hu, X. and Yue, C.-Y. (1999), "The flexural modulus of misaligned short-fiber-reinforced polymers", Compos. Sci. Technol., 59(10), 1533-1542. https://doi.org/10.1016/S0266-3538(99)00022-6
  24. Fu, L., Tang, K., Song, K., Van Aken, P.A., Yu, Y. and Maier, J. (2014), "Nitrogen doped porous carbon fibres as anode materials for sodium ion batteries with excellent rate performance", Nanoscale, 6(3), 1384-1389. https://doi.org/10.1039/c3nr05374a
  25. Fu, S., Sun, Z., Huang, P., Li, Y. and Hu, N. (2019), "Some basic aspects of polymer nanocomposites: A critical review", Nano Mater. Sci., 1(1), 2-30. https://doi.org/10.1016/j.nanoms.2019.02.006
  26. Ghasemi, A.R., Mohandes, M., Dimitri, R. and Tornabene, F. (2019), "Agglomeration effects on the vibrations of CNTs/fiber/polymer/metal hybrid laminates cylindrical shell", Compos. Part B: Eng., 167, 700-716. https://doi.org/10.1016/j.compositesb.2019.03.028
  27. Ghorbanpour Arani, A. and Soleymani, T. (2019), "Size-dependent vibration analysis of an axially moving sandwich beam with MR core and axially FGM faces layers in yawed supersonic airflow", Eur. J. Mech. - A/Solids, 77, 103792. https://doi.org/10.1016/j.euromechsol.2019.05.007
  28. Ghorbanpour Arani, A., Rousta Navi, B. and Mohammadimehr, M. (2016), "Surface stress and agglomeration effects on nonlocal biaxial buckling polymeric nanocomposite plate reinforced by CNT using various approaches", Adv. Compos. Mater., 25(5), 423-441. https://doi.org/10.1080/09243046.2015.1052189
  29. Ghorbanpour Arani, A., BabaAkbar Zarei, H. and Haghparast, E. (2018), "Vibration response of viscoelastic sandwich plate with magnetorheological fluid core and functionally graded-piezoelectric nanocomposite face sheets", J. Vib. Control, 107754631774750. https://doi.org/10.1177/1077546317747501
  30. Gladkovsky, S.V., Kuteneva, S.V. and Sergeev, S.N. (2019), "Materials Characterization Microstructure and mechanical properties of sandwich copper / steel composites produced by explosive welding", Mater. Characteriz., 154, 294-303. https://doi.org/10.1016/j.matchar.2019.06.008
  31. Gu, W., Liu, X., Ye, Q., Gao, Q., Gong, S., Li, J. and Shi, S.Q. (2020), "Bio-inspired co-deposition strategy of aramid fibers to improve performance of soy protein isolate-based adhesive", Indust. Crops Products, 150, 112424. https://doi.org/10.1016/j.indcrop.2020.112424
  32. Hajmohammad, M.H., Zarei, M.S., Farrokhian, A. and Kolahchi, R. (2018), "A layerwise theory for buckling analysis of truncated conical shells reinforced by CNTs and carbon fibers integrated with piezoelectric layers in hygrothermal environment", Adv. Nano Res., Int. J., 6(4), 299-321. http://dx.doi.org/10.12989/anr.2018.6.4.299
  33. Harris, C.E., Starnes, J.H. and Shuart, M.J. (2002), "Design and Manufacturing of Aerospace Composite Structures, State-of-the-Art Assessment", J. Aircr., 39(4), 545-560. https://doi.org/10.2514/2.2992
  34. Hejri, Z., Hejri, M., Omidvar, M. and Morshedi, S. (2020), "A novel nanocomposite as adsorbent for formaldehyde removal from aqueous solution", Adv. Nano Res., Int. J., 8(1), 1-11. https://doi.org/10.12989/anr.2020.8.1.001
  35. Huang, C.J., Fu, S.Y., Zhang, Y.H., Lauke, B., Li, L.F. and Ye, L. (2005), "Cryogenic properties of SiO2/epoxy nanocomposites", Cryogenics, 45(6), 450-454. https://doi.org/10.1016/j.cryogenics.2005.03.003
  36. Hussain, M., Naeem, M.N., Tounsi, A. and Taj, M. (2019), "Nonlocal effect on the vibration of armchair and zigzag SWCNTs with bending rigidity", Adv. Nano Res., Int. J., 7(6), 431-442. https://doi.org/10.12989/anr.2019.7.6.431
  37. Hussain, M., Naeem, M.N., Taj, M. and Tounsi, A. (2020), "Simulating vibration of single-walled carbon nanotube using Rayleigh-Ritz's method", Adv. Nano Res., Int. J., 8(3), 215-228. https://doi.org/10.12989/anr.2020.8.3.215
  38. Jia, C., Zhang, R., Yuan, C., Ma, Z., Du, Y., Liu, L. and Huang, Y. (2020), "Surface modification of aramid fibers by amino functionalized silane grafting to improve interfacial property of aramid fibers reinforced composite", Polym. Compos., 41(5), 2046-2053. https://doi.org/10.1002/pc.25519
  39. Jisheng, M.A., Zongneng, Q.I. and Shufan, Z. (2001), "Synthesis and characterization of elastomeric polyurethane/clay nanocomposites", Acta Polymerica Sinica, 82(6), 1444-1448. https://doi.org/10.1002/app.1982
  40. Khandan, A., Saber-Samandari, S., Telloo, M., Kazeroni, Z.S., Esmaeili, S., Sheikhbahaei, E. and Kamyab, B. (2020), "A Mitral Heart Valve Prototype Using Sustainable Polyurethane Polymer: Fabricated by 3D Bioprinter, Tested by Molecular Dynamics Simulation", AUT J. Mech. Eng. https://doi.org/10.22060/AJME.2020.17450.5862
  41. Khater, H.M. (2016), "Nano-Silica effect on the physicomechanical properties of geopolymer composites", Adv. Nano Res., Int. J., 4(3), 181-195. https://doi.org/10.12989/anr.2016.4.3.181
  42. Kim, J.-W., Galanzha, E.I., Shashkov, E.V., Moon, H.-M. and Zharov, V.P. (2009), "Golden carbon nanotubes as multimodal photoacoustic and photothermal high-contrast molecular agents", Nature Nanotechnol., 4(10), 688-694. https://doi.org/10.1038/nnano.2009.231
  43. Koutu, V., Rajawat, S., Shastri, L. and Malik, M.M. (2019), "Apoptosis and inhibition of human epithelial cancer cells by ZnO nanoparticles synthesized using plant extract", Adv. Nano Res., Int. J., 7(4), 233-240. https://doi.org/10.12989/anr.2019.7.4.233
  44. Letti, C.J., Costa, K.A.G., Gross, M.A., Paterno, L.G., Pereira-daSilva, M.A., Morais, P.C. and Soler, M.A.G. (2017), "Synthesis, morphology and electrochemical applications of iron oxide based nanocomposites", Adv. Nano Res., Int. J., 5(3), 215-230. https://doi.org/10.12989/anr.2017.5.3.215
  45. Li, T. and Wang, L. (2017), "Bending behavior of sandwich composite structures with tunable 3D-printed core materials", Compos. Struct., 175, 46-57. https://doi.org/10.1016/j.compstruct.2017.05.001
  46. Masalov, V.M., Dolganov, P.V., Sukhinina, N.S., Dolganov, V.K. and Emelchenko, G.A. (2014), "Synthesis of polymer-based inverted opal and transformation of its optical properties", Adv. Nano Res., Int. J., 2(1), 69-76. https://doi.org/10.12989/anr.2014.2.1.069
  47. Masselter, T. and Speck, T. (2011), Biomimetic fiber-reinforced compound materials, Intech.
  48. Mazloom, M. and Mirzamohammadi, S. (2019), "Thermal effects on the mechanical properties of cement mortars reinforced with aramid, glass, basalt and polypropylene fibers", Adv. Mater. Res., Int. J., 8(2), 137-154. https://doi.org/10.12989/amr.2019.8.2.137
  49. Mckechnie, D., Cree, J., Wadkin-snaith, D. and Johnston, K. (2020), "Glass transition temperature of a polymer thin film : Statistical and fitting uncertainties", Polymer, 195, 122433. https://doi.org/10.1016/j.polymer.2020.122433
  50. Mehar, K. and Panda, S.K. (2019), "Multiscale modeling approach for thermal buckling analysis of nanocomposite curved structure", Adv. Nano Res., Int. J., 7(3), 181-190. https://doi.org/10.12989/anr.2019.7.3.181
  51. Mirjavadi, S.S., Forsat, M., Barati, M.R. and Hamouda, A.M.S. (2020), "Nonlinear forced vibrations of multi-scale epoxy/CNT/fiberglass truncated conical shells and annular plates via 3D Mori-Tanaka scheme", Steel Compos. Struct., Int. J., 35(6), 765-777. https://doi.org/10.12989/scs.2020.35.6.765
  52. Mohammadimehr, M., Rousta Navi, B. and Ghorbanpour Arani, A. (2015), "Free vibration of viscoelastic double-bonded polymeric nanocomposite plates reinforced by FG-SWCNTs using MSGT, sinusoidal shear deformation theory and meshless method", Compos. Struct., 131, 654-671. https://doi.org/10.1016/j.compstruct.2015.05.077
  53. Mohammadimehr, M., Mohammadimehr, M.A. and Dashti, P. (2016), "Size-dependent effect on biaxial and shear nonlinear buckling analysis of nonlocal isotropic and orthotropic microplate based on surface stress and modified couple stress theories using differential quadrature methods", Appl. Mathe. Mech., 37(4), 529-554. https://doi.org/10.1007/s10483-016-2045-9
  54. Mohammadimehr, M., Navi, B.R. and Ghorbanpour Arani, A. (2017), "Dynamic stability of modified strain gradient theory sinusoidal viscoelastic piezoelectric polymeric functionally graded single-walled carbon nanotubes reinforced nanocomposite plate considering surface stress and agglomeration effects under hydro-thermo-electro-magneto-mechanical loadings", Mech. Adv. Mater. Struct., 24(16), 1325-1342. https://doi.org/10.1080/15376494.2016.1227507
  55. Mohammadimehr, M., Emdadi, M., Afshari, H. and Rousta Navi, B. (2018a), "Bending, buckling and vibration analyses of MSGT microcomposite circular-annular sandwich plate under hydro-thermo-magneto-mechanical loadings using DQM", Int. J. Smart Nano Mater., 9(4), 233-260. https://doi.org/10.1080/19475411.2017.1377312
  56. Mohammadimehr, M., Mohammadi-Dehabadi, A.A., AkhavanAlavi, S.M., Alambeigi, K., Bamdad, M., Yazdani, R., Hanifehlou, S. (2018b), "Bending, buckling, and free vibration analyses of carbon nanotube reinforced composite beams and experimental tensile test to obtain the mechanical properties of nanocomposite", Steel Compos. Struct., Int. J., 29(3), 405-422. https://doi.org/10.12989/scs.2018.29.3.405
  57. Navi, B.R., Mohammadimehr, M. and Arani, A.G. (2019), "Active control of three-phase CNT/resin/fiber piezoelectric polymeric nanocomposite porous sandwich microbeam based on sinusoidal shear deformation theory", Steel Compos. Struct., Int. J., 32(6), 753-767. https://doi.org/10.12989/scs.2019.32.6.753
  58. Nejadi, M.M. and Mohammadimehr, M. (2020), "Buckling analysis of nano composite sandwich Euler-Bernoulli beam considering porosity distribution on elastic foundation using DQM", Adv. Nano Res., Int. J., 8(1), 59-68. https://doi.org/10.12989/anr.2020.8.1.059
  59. Ott, E., Nakagawa, T., Sandoval, H. and Shamsaei, N. (2019), "3 - Qualification and certification of metal additive manufactured hardware for aerospace applications*", Additive Manuf. Aerosp. Indust., 33-66. https://doi.org/10.1016/B978-0-12-814062-8.00003-0
  60. Ou, Y., Yang, F. and Yu, Z. (1998), "A new conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization", J. Polym. Sci. Part B: Polym. Phys., 36(5), 789-795. https://doi.org/10.1002/(SICI)1099-0488
  61. Pandian, G., Pecht, M., Zio, E. and Hodkiewicz, M. (2020), "Data-driven reliability analysis of Boeing 787 Dreamliner", Chinese J. Aeronaut., 33(7), 1969-1979. https://doi.org/10.1016/j.cja.2020.02.003
  62. Rahman, M.M., Jumaat, M.Z. and Islam, A.B.M. (2017), "Weight minimum design of concrete beam strengthened with glass fiber reinforced polymer bar using genetic algorithm", Comput. Concrete, Int. J., 19(2), 127-131. https://doi.org/10.12989/cac.2017.19.2.127
  63. Rajabi, J. and Mohammadimehr, M. (2019), "Bending analysis of a micro sandwich skew plate using extended Kantorovich method based on Eshelby-Mori-Tanaka approach", Comput. Concrete, Int. J., 23(5), 361-376. https://doi.org/10.12989/cac.2019.23.5.361
  64. Ahuja, T. and Kumar, D. (2009), "Recent progress in the development of nano-structured conducting polymers/nanocomposites for sensor applications", Sensors Actuat. B: Chem., 136(1), 275-286. https://doi.org/10.1016/j.snb.2008.09.014
  65. Saleem, A., Medina, L. and Skrifvars, M. (2020), "Mechanical performance of hybrid bast and basalt fibers reinforced polymer composites", J. Polym. Res., 27(3). https://doi.org/10.1007/s10965-020-2028-6
  66. Salvetat, J.-P., Briggs, G.A.D., Bonard, J.-M., Bacsa, R.R., Kulik, A.J., Stockli, T., Burnham, N.A. and Forro, L. (1999), "Elastic and shear moduli of single-walled carbon nanotube ropes", Phys. Rev. Lett., 82(5), 944. https://doi.org/10.1103/PhysRevLett.82.944
  67. Shahsavari, D., Karami, B. and Janghorban, M. (2019), "Size-dependent vibration analysis of laminated composite plates", Adv. Nano Res., Int. J., 7(5), 337-349. https://doi.org/10.12989/anr.2019.7.5.337
  68. Sheng, N., Boyce, M.C., Parks, D.M., Rutledge, G.C., Abes, J.I. and Cohen, R.E. (2004), "Multiscale micromechanical modeling of polymer/clay nanocomposites and the effective clay particle", Polymer, 45(2), 487-506. https://doi.org/10.1016/j.polymer.2003.10.100
  69. Soleymani, T. and Arani, A.G. (2019), "On aeroelastic stability of a piezo-MRE sandwich plate in supersonic airflow", Compos. Struct., 230, 111532. https://doi.org/10.1016/j.compstruct.2019.111532
  70. Tayeb, T.S., Zidour, M., Bensattalah, T., Heireche, H., Benahmed, A. and Bedia, E.A. (2020), "Mechanical buckling of FG-CNTs reinforced composite plate with parabolic distribution using Hamilton's energy principle", Adv. Nano Res., Int. J., 8(2), 135-148. https://doi.org/10.12989/anr.2020.8.2.135
  71. Unnikrishnan, V.U., Unnikrishnan, G.U. and Reddy, J.N. (2011), "Multiscale analysis of carbon nanotube-reinforced nanofiber scaffolds", Compos. Struct., 93(2), 1008-1014. https://doi.org/10.1016/j.compstruct.2010.06.019
  72. Wang, D. and Bierwagen, G.P. (2009), "Sol-gel coatings on metals for corrosion protection", Progress Organic Coat., 64(4), 327-338. https://doi.org/10.1016/j.porgcoat.2008.08.010
  73. Wang, S., Chen, F., Xue, Q. and Zhang, P. (2020), "Splitting tensile strength of cement soil reinforced with basalt fibers", Materials, 13(14), 1-15. https://doi.org/10.3390/ma13143110
  74. Wen, J. and Wilkes, G.L. (1996), "Organic/inorganic hybrid network materials by the sol-gel approach", Chem. Mater., 8(8), 1667-1681. https://doi.org/10.1021/cm9601143
  75. Wu, H., Fahy, W.P., Kim, S., Kim, H., Zhao, N., Pilato, L., Kafi, A., Bateman, S. and Koo, J.H. (2020), "Recent developments in polymers/polymer nanocomposites for additive manufacturing", Progress Mater. Sci., 111, 100638. https://doi.org/10.1016/j.pmatsci.2020.100638
  76. Yang, G., Park, M. and Park, S.-J. (2019), "Recent progresses of fabrication and characterization of fibers-reinforced composites: A review", Compos. Commun., 14, 34-42. https://doi.org/10.1016/j.coco.2019.05.004