DOI QR코드

DOI QR Code

Structural behavior of concrete walls reinforced with ferrocement laminates

  • Shaheen, Yousry B.I. (Civil Engineering Department, Faculty of Engineering, Menoufia University) ;
  • Refat, Hala M. (Civil Engineering Department, Faculty of Engineering, Benha University) ;
  • Mahmoud, Ashraf M. (Civil Engineering Department, Faculty of Engineering, Modern University for Technology and Information (MTI))
  • 투고 : 2019.11.05
  • 심사 : 2021.04.06
  • 발행 : 2021.05.25

초록

The present work focuses on experimental and numerical performance of the ferrocement RC walls reinforced with welded steel mesh, expanded steel mesh, fiber glass mesh and tensar mesh individually. The experimental program comprised twelve RC walls having the dimensions of 450 mm×100 mm×1000 mm under concentric compression loadings. The studied variables are the type of reinforcing materials, the number of mesh layers and volume fraction of reinforcement. The main aim is to assess the influence of engaging the new inventive materials in reinforcing the composite RC walls. Non-linear finite element analysis; (NLFEA) was carried out to simulate the behavior of the composite walls employing ANSYS-10.0 Software. Parametric study is also demonstrated to check out the variables that can mainly influence the mechanical behavior of the model such as the change of wall dimensions. The obtained numerical results indicated the acceptable accuracy of FE simulations in the estimation of experimental values. In addition, the strength gained of specimens reinforced with welded steel mesh was higher by amount 40% compared with those reinforced with expanded steel mesh. Ferrocement specimens tested under axial compression loadings exhibit superior ultimate loads and energy absorbing capacity compared to the conventional reinforced concrete one.

키워드

참고문헌

  1. Abdel-Naby, A. (2006), "Development of ferrocement U-shaped beams infilled with core materials", M.S. Thesis, American University in Cairo, Egypt.
  2. Al-Rifiaie, W.N. and A-Aziz, A. (1995), "Thin ferrocement bearing walls", J. Ferroce., 25(3), 247-259.
  3. Amin, M.A., Alam, M.K., Rahman, M.M., Rahman, M.S. and Islam, M.A. (2015), "Study of double layer wire mesh ferrocement plate using neutron imaging technique", Int. J. Adv. Res. Technol., 4(7), 83-92.
  4. ANSYS (2005), Engineering Analysis System User's Manual, Vol. 1&2, and Theoretical Manual, Revision 8.0, Swanson Analysis System Inc., Houston, Pennsylvani.
  5. ASTM C III6/C III6M (2015), Standard Specification for Fiber-Reinforced Concrete, ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 19428-2959 USA.
  6. Basunbul, I.A., Saleem, M. and Al-Sulaimani. G.J. (1990), "Structural behavior of ferrocement load bearing walls panels", J. Ferroce., 20(1), 1-9.
  7. Bezbradica, M. (2015), "Analysis of ferrocement and textile reinforced concrete for shell structures", M.S. Thesis, Lund University, Sweden.
  8. Deshpande, N. and Shirsath, M. (2016), "Comparative study between bamboo reinforced and conventional ferrocement panels", Int. J. Res. Publ Eng. Technol., 2(7), 6-9.
  9. Fahmy, E.H. (2004), "Ferrocement sandwich and cored panels for floor and wall construction", Proceedings of the 29th Conference on our World in Concrete & Structures, Singapore.
  10. Fahmy, E.H., Shaheen, Y.B. and Abou Zeid, M.N. (2004), "Development of ferrocement panels for floor and wall construction", Proceedings of the 5th Structural Specialty Conference of the Canadian Society for Civil Engineering, 1-10.
  11. Fahmy, E.H., Shaheen, Y.B., Abou Zeid, M.N. and Gaafar, H. (2004), "Ferrocement sandwich and cored panels for floor and wall construction", Proceedings of the 29th Conference on Our World in Concrete & Structures, 245-252.
  12. Gaafar, H.M. (2004), "Ferrocement sandwich and hollow core panels for floor and wall construction", MS Thesis, American University in Cairo, Egypt.
  13. Grija, S., Sivakumar, P., Lakshmikandhan, K.N., Ravichandran, R. and Karthikeyan, B. (2014), "Novel ferrocement light weight wall panels", Int. J. Appl. Eng. Res., 9(18), 4645-4657.
  14. Hoque, M. (2006), "3D nonlinear mixed finite-element analysis of RC beams and plates with and without FRP reinforcement", M.Sc. Thesis, University of Manitoba, Winnipeg, Manitoba, Canada.
  15. Housing and Building national research Center (2007), The Egyptian Code for Design and Construction of Concrete Structures, ECP 203-2007, Ministry of Housing, Utilities and Urban Communities, Giza, Egypt.
  16. IFS Commitee 10 (2001), Ferrocement Model Code: Building Code Recommendations for Ferrocement, IFS 10-01, International Ferrocement Society, Asian Institute of Technology, Bangkok, Thailand.
  17. Lakshmikandhan, K.N., Harshavardhan, B.S., Prabakar, J. and Saibabu, S. (2017), "Investigation on wall panel sandwiched with lightweight concrete", IOP Conf. Ser.: Mater. Sci. Eng., 225(1), 012275. https://doi.org/10.1088/1757-899X/225/1/012275
  18. Lakshmikandhan1, K.N., Sivakumar, P., Ravichandran, R., Sivasubramanian, K. and Saibabu, S. (2015), "Development and testing of novel ferrocement wall panels", Int. J. Res. Eng. Technol., 4(13), 500-509.
  19. Memon, N.A., Sumadi, S.R. and Ramli, M. (2004), "Strength and behavior of light weight ferrocement-aerated concrete sandwich blocks", MS Thesis, American University in Cairo, Egypt.
  20. Rashid, M.H., Alam, Z., Mahmud, F. and Anita, M.S. (2019), "Durability and performance of ferrocement infill wall panel", Civil Eng. J., 5(6), 1205-1213. https://doi.org/10.28991/cej-2019-03091325
  21. Shaaban, I.G. and Seoud, O.A. (2018), "Experimental behavior of full-scale exterior beam-column space joints retrofitted by ferrocement layers under cyclic loading", Case Stud. Constr. Mater., 8, 61-78. https://doi.org/10.1016/j.cscm.2017.11.002.
  22. Shaaban, I.G., Shaheen, Y.B.I., Elsayed, E.L., Kamal, O.A. and Adesina, P.A. (2018), "Experimental behavior of full-scale exterior beam-column space joints retrofitted by ferrocement layers under cyclic loading", Constr. Build. Mater., 171, 802-816. https://doi.org/10.1016/j.cscm.2017.11.002.
  23. Shaheen, Y.B.I., Eltaly, B. and Kameel, M. (2013), "Experimental and Analytical Investigation of Ferrocement Water pipe", J. Civil Eng. Constr. Tech., 4(4), 157-167.
  24. Shaheen, Y.B.I., Mohamed, A.M. and Mohamed, H.R. (2016), "Structural performance of ribbed ferrocement plates reinforced with composite materials", Struct. Eng. Mech., 60(4), 567-594. http://doi.org/10.12989/sem.2016.60.4.567.
  25. Shaheen, YBI, Soliman, NM, and Kandil, DE. (2013), "Influence of reinforced ferrocement concrete plates under impact load", Int. J. Curr. Eng. Technol., 3(4), 1528-1540.
  26. Singh, G. (2005), "Finite element analysis of reinforced concrete shear walls", M.Sc. Thesis, Deemed University, India.
  27. Subramani1, T. and Ramasamy, P. (2016), "Thermal conductivity of fibre filled with ferrocement sandwich panels", Int. J. Appl. Innov. Eng. Manage., 5(5), 204-215.