DOI QR코드

DOI QR Code

Confinement model for RC columns strengthened with direct-fastened steel plates

  • Shan, Z.W. (Key Laboratory of Concrete and Prestressed Concrete Structures of the Ministry of Education, Southeast University) ;
  • Looi, D.T.W. (School of Engineering, Swinburne University of Technology, Sarawak Campus) ;
  • Su, R.K.L. (Department of Civil Engineering, The University of Hong Kong)
  • 투고 : 2020.01.23
  • 심사 : 2020.08.30
  • 발행 : 2021.05.25

초록

Reinforced concrete (RC) columns can be strengthened by direct fastening of steel plates around a column, forming composite actions. This method can increase both the total load bearing area and the concrete confinement stress. To predict the axial load resistance of strengthened RC columns, the equivalent passive confinement stress of the stirrups and the steel jacket should be accurately quantified, which requires the stress in the stirrups and shear force in the connections to be first obtained. In this paper, parameters, i.e., the stress ratio of the stirrups and shear force ratio of steel plate connectors are utilized to quantify the stress of the stirrups and shear force in the connections. A mechanical model for determining the stress ratio of the stirrups and shear force ratio of steel plate connectors is proposed and validated using the experimental results in a previous study. The model is found to be robust. Subsequently, a parametric study is conducted and the optimum stress ratios of the stirrups and the optimum shear force ratios of connectors are proposed for engineering designs.

키워드

참고문헌

  1. Afshin, H., Shirazi, M.R.N. and Abedi, K. (2019), "Experimental and numerical study about seismic retrofitting of corrosion-damaged reinforced concrete columns of bridge using combination of FRP wrapping and steel profiles", Steel Compos. Struct., 30(3), 231-251. https://doi.org/10.12989/scs.2019.30.3.231.
  2. Campione, G. (2008), "Analytical model for high-strength concrete columns with square cross-section", Struct. Eng. Mech., 28(3), 295-316. https://doi.org/10.12989/sem.2008.28.3.295.
  3. Cusson, D. and Paultre, P. (1994), "High-strength concrete columns confined by rectangular ties", J. Struct. Eng., 120(3), 783-804. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:3(783).
  4. Dhakal, R.P. and Maekawa, K. (2002), "Modeling for postyield buckling of reinforcement", J. Struct. Eng., 128(9), 1139-1147. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:9(1139).
  5. Dong, J., Ma, H., Zou, C., Liu, Y. and Huang, C. (2019), "Finite element analysis and axial bearing capacity of steel reinforced recycled concrete filled square steel tube columns", Struct. Eng. Mech., 72(1), 43-60. https://doi.org/10.12989/sem.2019.72.1.043.
  6. Guo, Z.H., Wang, C.Z. (1991), "Investigation of strength and failure criterion of concrete under multi-axial stresses", China. Civ. Eng. J., 24(3), 1-14.
  7. Hu, J., Liang, H. and Lu, Y. (2018), "Behavior of steel-concrete jacketed corrosion-damaged RC columns subjected to eccentric load", Steel Compos. Struct., 29(6), 689-701. https://doi.org/10.12989/scs.2018.29.6.689.
  8. La Mendola, L. and Papia, M. (2002), "General stress-strain model for concrete or masonry response under uniaxial cyclic compression", Struct. Eng. Mech., 14(4), 435-454. https://doi.org/10.12989/sem.2002.14.4.435.
  9. Li, L.Z., Liu, X., Yu, J.T., Lu, Z.D., Su, M.N., Liao, J.H. and Xia, M. (2019), "Experimental study on seismic performance of post-fire reinforced concrete frames", Eng. Struct., 179, 161-173. https://doi.org/10.1016/j.engstruct.2018.10.080.
  10. Ma, H., Dong, J., Hu, G. and Liu, Y. (2019), "Axial compression performance of composite short columns composed of RAC-filled square steel tube and profile steel", J. Constr. Steel Res., 153, 416-430. https://doi.org/10.1016/j.jcsr.2018.10.018.
  11. Mander, J.B., Priestley, M.J. and Park R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  12. Meda, A., Mostosi, S., Rinaldi, Z. and Riva, P. (2014), "Experimental evaluation of the corrosion influence on the cyclic behaviour of RC columns", Eng. Struct., 76, 112-123. https://doi.org/10.1016/j.engstruct.2014.06.043.
  13. Nematzadeh, M., Hajirasouliha, I., Haghinejad, A. and Naghipour, M. (2017), "Compressive behaviour of circular steel tube-confined concrete stub columns with active and passive confinement", Steel Compos. Struct., 24(3), 323-337. https://doi.org/10.12989/scs.2017.24.3.323.
  14. Obaidat, Y.T. and Haddad, R.H. (2016), "Prediction of residual mechanical behavior of heat-exposed LWAC short column: a NLFE model", Struct. Eng. Mech., 57(2), 265-280. https://doi.org/10.12989/sem.2016.57.2.265.
  15. Ortega, N.F., Moro, J.M. and Meneses, R.S. (2018), "Theoretical model to determine bond loss in prestressed concrete with reinforcement corrosion", Struct. Eng. Mech., 65(1), 1-7. https://doi.org/10.12989/sem.2018.65.1.001.
  16. Papia, M. and Russo, G. (1989), "Compressive concrete strain at buckling of longitudinal reinforcement", J. Struct. Eng., 115(2), 382-397. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:2(382).
  17. Russo, G. and Terenzani, L. (2001), "Non linear buckling model of the longitudinal reinforcement in RC columns, In: Studies and research, Graduate school in concrete structures; Milan(Italy): Fratelli Presenti, Politecnico di Milano", 22, 203-227.
  18. Saatcioglu, M. and Razvi, S.R. (1992), "Strength and ductility of confined concrete", J. Struct. Eng., 118(6), 1590-1607. https://doi.org/10.1061/(ASCE)0733-9445(1992)118:6(1590).
  19. Shan, Z.W. and Su, R.K.L. (2018), "Flexural capacity model for RC beams strengthened with bolted side-plates incorporating both partial longitudinal and transverse interactions", Eng. Struct., 168, 44-57. https://doi.org/10.1016/j.engstruct.2018.04.069.
  20. Shan, Z.W. and Su, R.K.L. (2019b), "Behavior of shear connectors joined by direct fastening", Eng. Struct., 196, 109321. https://doi.org/10.1016/j.engstruct.2019.109321.
  21. Shan, Z.W. and Su, R.K.L. (2020), "Axial strengthening of RC columns by direct fastening of steel plates", Struct. Eng. Mech., accepted.
  22. Sheikh, S.A. and Uzumeri, S.M. (1982), "Analytical model for concrete confinement in tied columns", J. Struct. Eng., 108(12), 2703-2722.
  23. Su, R.K. and Bei, C. (2008), "The effect of coarse aggregate size on the stress-strain curves of concrete under uniaxial compression", HKIE Transactions, 15(3), 33-39. https://doi.org/10.1080/1023697X.2008.10668122.
  24. Su, R.K.L. and Shan, Z.W. (2019a), "Axial strengthening of RC columns by steel encasement with direct fastening connections", IOP conf. ser., Mater. sci. eng., 660(1), 012055.
  25. SUC (2013), Code of practice for structural use of concrete, Hong Kong Buildings Department (HKBD); Hong Kong.
  26. Tan, T.H. and Yip, W.K. (1999), "Behavior of axially loaded concrete columns confined by elliptical hoops", ACI Struct. J., 96(6), 967-971. https://doi.org/10.14359/771 .
  27. Tang, C.W. (2017), "Fire resistance of high strength fiber reinforced concrete filled box columns", Steel Compos. Struct., 23(5), 611-621. https://doi.org/10.12989/scs.2017.23.5.611.
  28. Tang, C.W. (2018), "Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading", Steel Compos. Struct., 27(2), 243-253. https://doi.org/10.12989/scs.2018.27.2.243.
  29. Wang, L. and Su, R.K.L. (2018), "Strengthening of preloaded RC columns by post compressed plates-A review". Struct. Eng. Mech., 65, 477-490. https://doi.org/10.12989/sem.2018.65.4.477.
  30. Yang, H., Lin, Y., Hsiao, C. and Liu, J.Y. (2009), "Evaluating residual compressive strength of concrete at elevated temperatures using ultrasonic pulse velocity", Fire Safety J., 44(1), 121-130. https://doi.org/10.1016/j.firesaf.2008.05.003.
  31. Zhu, A., Zhang, X., Zhu, H., Zhu, J. and Lu, Y. (2017), "Experimental study of concrete filled cold-formed steel tubular stub columns", J. Constr. Steel Res., 134, 17-27. https://doi.org/10.1016/j.jcsr.2017.03.003.