DOI QR코드

DOI QR Code

Shear strength evaluation of RC solid piers of high-speed railway bridges in China

  • Guo, Wei (School of Civil Engineering, Central South University) ;
  • Fan, Chao (School of Civil Engineering, Central South University) ;
  • Cui, Yao (State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology) ;
  • Zeng, Chen (School of Civil Engineering, Central South University) ;
  • Jiang, Lizhong (School of Civil Engineering, Central South University) ;
  • Yu, Zhiwu (School of Civil Engineering, Central South University)
  • 투고 : 2019.07.15
  • 심사 : 2021.04.06
  • 발행 : 2021.05.25

초록

Piers are the main lateral force-resisting members of high-speed railway (HSR) bridges used in China and are characterized by low axial load ratios, low longitudinal reinforcement ratios, low stirrup ratios, and high shear span ratios. It is well known that flexural, flexural-shear, and shear failures of piers may occur during an earthquake. In this study, a new shear strength model was developed to simulate the seismic failure of HSR solid piers accurately. First, low cyclic-loading test data of solid piers obtained in recent years were collected to set up a database for model verification. Second, based on the test database, the applicability of existing shear strength models was evaluated. Finally, a new shear strength model for HSR solid piers with round-ended cross-sections was derived based on the truss model and ultimate equilibrium theory. In comparison with existing models, it was demonstrated that the proposed model could be used to predict the shear strength of HSR piers more accurately.

키워드

과제정보

The authors are grateful for the financial support from the National Natural Science Foundation of China (No. 51878674) and the Foundation for Key Youth Scholars in Hunan Province (No. 150220077).

참고문헌

  1. ACI 318 (2011), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, Michigan, USA.
  2. Alim, H., Khan, A.K. and Bhuiyan, M.A. (2015), "Reliability based seismic performance analysis of retrofitted bridge bent", IABSE-JSCE Joint Conference on Advances in Bridge Engineering, Dhaka, Bangladesh, August.
  3. Aschheim, A.M. and Moehle, J.P. (1992), "Shear strength and deformability of RC bridge columns subjected to inelastic displacements", Technical Report No. UCB/EERC 92/04, University of California, Berkeley, California.
  4. ATC-6 (1981), Seismic Design Guidelines for Highway Bridge, Applied Technology Council, Berkeley, California, USA.
  5. Bao, H. (2014), "Seismic performance of piles in high-speed railway bridges", Master's Thesis, Beijing Jiaotong University, Beijing, China. (in Chinese)
  6. Bi, G.P. (2014), "Study on some key issues on seismic design of largescale complicated interchange bridges", Ph.D. Dissertation, Tongji University, Shanghai, China. (in Chinese)
  7. Caltrans (2013), Caltrans Seismic Design Criteria, California Department of Transportation; Sacramento, California, USA.
  8. CSA S6 (2014), Canadian Highway Bridge Design Code, Canadian Standards Association.
  9. George, D. and Mallery, P. (2016), IBM SPSS Statistics 23 Step by Step: A Simple Guide and Reference, Routledge Press, London, UK.
  10. Gou, H.Y., Yang, B., Guo, W. and Biao, Y. (2019a), "Static and dynamic responses of a tied-arch railway bridge under train load", Struct. Eng. Mech., 71(1), 13-22. http://doi.org/10.12989/sem.2019.71.1.013.
  11. Gou, H.Y., Yang, L.C., Mo, Z.X., Guo, W., Shi, W.Y. and Bao, Y. (2019b), "Effect of long-term bridge deformations on safe operation of high-speed railway and vibration of vehicle-bridge coupled system", Int. J. Struct. Stab. Dyn., 2019, 1-25. https://doi.org/10.1142/S0219455419501116.
  12. Gu, Q., Liu, Y.D., Guo, W., Li, W.Q., Yu, Z.W. and Jiang, L.Z. (2019), "A practical wheel-rail interaction element for modeling vehicle-track-bridge systems", Int. J. Struct. Stab. Dyn., 19(2), 1950011. https://doi.org/10.1142/S0219455419500111.
  13. Gu, X.L. (2015), Basic Principles of Concrete Structures, Tongji University Press, Shanghai, China. (in Chinese)
  14. Guo, W., Hu, Y., Liu, H.Y. and Bu, D. (2019), "Seismic performance evaluation of typical piers of China's high-speed railway bridge line using pushover analysis", Math. Prob. Eng., 2019, 1-17. https://doi.org/10.1155/2019/9514769.
  15. Guo, W., Zeng, C., Gou, H., Gu, Q., Wang, T., Zhou, H., Zhang, B. and Wu, J. (2021), "Real-time hybrid simulation of high-speed train-track-bridge interactions using the moving load convolution integral method", Eng. Struct., 228, 111537. https://doi.org/10.1016/j.engstruct.2020.111537.
  16. Hendy, C.R. and Smith, D.A. (2007), Designers' Guide to EN 1992-2: Eurocode 2: Design of Concrete Structures: Part 2: Concrete Bridges, Thomas Telford.
  17. Hou, W.Q., Li, Y.K., Guo, W., Li, J.L., Chen, Y.H. and Duan, X.X. (2018), "Railway vehicle induced vibration energy harvesting and saving of rail transit segmental prefabricated and assembling bridges", J. Clean. Prod., 182, 946-959. https://doi.org/10.1016/j.jclepro.2018.02.019.
  18. Joint ASCE-ACI Task Committee 426 (1973), "The shear strength of reinforced concrete members", J. Struct. Div., ASCE, 99(6), 1091-1187. https://doi.org/10.1061/JSDEAG.0003532
  19. JTJ/T B02-01-2008 (2008), Chinese Guidelines for Seismic Design of Highway Bridges, China Communication Publishing & Media Management co., Ltd., Beijing, China. (in Chinese)
  20. Ju, Y.Z., Yan, G.P. and Liu, L. (2003), "Experimental study on seismic behaviors of large-scale RC round-ended piers with low reinforcement ratio", China Civil Eng. J., 36(11), 65-69. https://doi.org/10.15951/j.tmgcxb.2003.11.013. (in Chinese)
  21. Konwinski, C.M., Ramirez, J.A. and Sozen, M.A. (1995), "Shear strength of reinforced concrete columns subject to seismic loading", Proceedings of National Seismic Conference on Bridges and Highways: Progress in Research and Practice, San Diego.
  22. Li, B.N., Dai, H. and Zhang, J.W. (2014), "Experimental study on seismic behavior of HRBF500 rebar reinforced round-ended high-speed railway bridge piers", J. Southeast Univ. (Nat. Sci. Ed.), 44(4), 832-837. https://doi.org/10.3969/j.issn.1001-0505.2014.04.027. (in Chinese)
  23. Liu, H.Y., Yu, Z.W. and Guo, W. (2019), "A fast modeling technique for the vertical train-track-bridge interactions", Shock Vib., 2019, 1-14. https://doi.org/10.1155/2019/5392930.
  24. Michael, B., Myles, P. and Marc, E. (2013), PEER Structural Performance Database User's Manual (Version 1.2), University of California, Berkeley.
  25. Montenegro, P.A., Barbosa, D., Carvalho, H. and Calcada, R. (2020), "Dynamic effects on a train-bridge system caused by stochastically generated turbulent wind fields", Eng. Struct., 211, 110430. https://doi.org/10.1016/j.engstruct.2020.110430.
  26. Montenegro, P.A., Calcada, R., Vila-Pouca, N. and Tanabe, M. (2016), "Running safety assessment of trains moving over bridges subjected to moderate earthquakes", Earthq. Eng. Struct. Dyn., 45, 483-504. https://doi.org/10.1002/eqe.2673.
  27. Montenegro, P.A., Carvalho, H., Calcada, R., Bolkovoy, A. and Chebykin, I. (2019), "Stability of a train running over the Volga River high speed railway bridge during crosswinds", Struct. Infrastr. Eng., 16(8), 1121-1137. https://doi.org/10.1080/15732479.2019.1684956.
  28. Priestley, M.J.N., Verma, R. and Xiao, Y. (1994), "Seismic shear strength of reinforced concrete columns", J. Struct. Eng., 120(8), 2310-2329. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:8(2310).
  29. Shao, G.Q., Jiang, L.Z. and Chouw, N. (2014), "Experimental investigations of the seismic performance of bridge piers with rounded rectangular cross-sections", Earthq. Struct., 7(4), 463-484. https://doi.org/10.12989/eas.2014.7.4.463.
  30. Tanabe, M., Goto, K., Watanabe, T., Sogabe, M., Wakui, H. and Tanabe, Y. (2017), "An efficient contact model for dynamic interaction analysis of high-speed train and railway structure including derailment during an earthquake", Int. J. Tran. Develop. Integ., 1(3), 540-551. https://doi.org/10.2495/TDI-V1-N3-540-551.
  31. Wang, D.S., Si, B.J., Sun, Z.G., Li, X.L. and Ai, Q.H. (2011), "Experiment on shear strength of reinforced concrete bridge column in plastic hinge zone under seismic effect", China J. Highway Tran., 24(2), 34-41. https://doi.org/10.19721/j.cnki.1001-7372.2011.02.007. (in Chinese)
  32. Zhang, M., Li, Y.S., Chen, G.Q., Li, R.Y., Zhu, S.J., Zhou, S.G., Lu, Y.R., Hu, F.R. and Wang, T.W. (1982), "Railway damages in the Tangshan earthquake", China Civil Eng. J., 15(1), 79-87. https://doi.org/10.15951/j.tmgcxb.1982.04.009. (in Chinese)
  33. Zhao, G.Y., Zhang, T.Y. and Chen, X. (2014), "Experimental study on the seismic performance of high speed railway bridge pier under low cyclic loading", China Railway Sci., 35(4), 38-44. (in Chinese) https://doi.org/10.3969/j.issn.1001-4632.2014.04.06
  34. Zheng, J. (2008), "Key technologies for high speed railway bridge construction", Eng. Sci., 10(7), 18-27. (in Chinese) https://doi.org/10.3969/j.issn.1009-1742.2008.07.002
  35. Zhu, Y. and Wei, Y.X. (2010), "Characteristic of railway damage due to Wenchuan earthquake and countermeasure considerations of engineering seismic design", Chin. J. Rock Mech. Eng., 29(1), 3378-3386. (in Chinese)