Geomechanics and Engineering

  • 제25권3호
  • /
  • Pages.179-194
  • /
  • 2021
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Study on bearing characteristic of rock mass with different structures: Physical modeling

  • Zhao, Zhenlong (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology) ;
  • Jing, Hongwen (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology) ;
  • Shi, Xinshuai (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology) ;
  • Yang, Lijun (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology) ;
  • Yin, Qian (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology) ;
  • Gao, Yuan (State Key Laboratory for Geomechanics and Deep Underground Engineering, China University of Mining and Technology)
  • 투고 : 2021.01.15
  • 심사 : 2021.04.08
  • 발행 : 2021.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this paper, to study the stability of surrounding rock during roadway excavation in different rock mass structures, the physical model test for roadway excavation process in three types of intact rock mass, layered rock mass and massive rock mass were carried out by using the self-developed two-dimensional simulation testing system of complex underground engineering. Firstly, based on the engineering background of a deep mine in eastern China, the similar materials of the most appropriate ratio in line with the similarity theory were tested, compared and determined. Then, the physical models of four different schemes with 1000 mm (height) × 1000 mm (length) × 250 mm (width) were constructed. Finally, the roadway excavation was carried out after applying boundary conditions to the physical model by the simulation testing system. The results indicate that the supporting effect of rockbolts has a great influence on the shallow surrounding rock, and the rock mass structure can affect the overall stability of the surrounding rock. Furthermore, the failure mechanism and bearing capacity of surrounding rock were further discussed from the comparison of stress evolution characteristics, distribution of stress arch, and failure modes in different schemes.

키워드

과제정보

This work was supported by National Natural Science Foundation of China (grant number 51734009, 52074259, 51904290). The authors gratefully appreciate these supports. It should be noted that in the process of collating data, the sources of some figures and ideas were not found. I hereby apologize and thank the authorship.

참고문헌

  1. Bewick, R.P., Kaiser, P.K. and Amann, E. (2019), "Strength of massive to moderately jointed hard rock masses", J. Rock Mech. Geotech. Eng., 11(3), 562-575. https://doi.org/10.1016/j.jrmge.2018.10.003.
  2. Bobet, A. (2016), "Deep tunnel in transversely anisotropic rock with groundwater flow", Rock Mech. Rock Eng., 49(12), 4817-4832. https://doi.org/10.1007/s00603-016-1118-6.
  3. Chang, X., Ma, W.Y., Li, Z.H. and Wang, H. (2018), "Crack behaviour of top layer in layered rocks", Geomech. Eng., 16(1), 49-58. https://doi.org/10.12989/gae.2018.16.1.049.
  4. Chen, S.J., Qu, X., Yin, D.W., Liu, X.Q., Ma, H.F. and Wang, H.Y. (2018), "Investigation lateral deformation and failure characteristics of strip coal pillar in deep mining", Geomech. Eng., 14(5), 421-428. https://doi.org/10.12989/gae.2018.14.5.421.
  5. Ding, X.L., Niu, X.Q., Pei, Q.T., Huang, S.L., Zhang, Y.T. and Zhang, C.H. (2019), "Stability of large underground caverns excavated in layered rock masses with steep dip angles: A case study", B. Eng. Geol. Environ., 78(7), 5101-5133. https://doi.org/10.1007/s10064-018-01440-8.
  6. Do, N.A., Dias, D., Dinh, V.D., Tran, T.T., Dao, V.C., Dao, V.D. and Nguyen P.N. (2019), "Behavior of noncircular tunnels excavated in stratified rock masses-Case of underground coal mines", J. Rock Mech. Geotech. Eng., 11(1), 99-110. https://doi.org/10.1016/j.jrmge.2018.05.005.
  7. Duan, S.Q., Feng, X.T., Jiang, Q., Liu, G.F., Pei S.F. and Fan, Y.L. (2017), "In situ observation of failure mechanisms controlled by rock masses with weak interlayer zones in large underground cavern excavations under high geostress", Rock Mech. Rock Eng., 46(9), 2465-2493. https://doi.org/10.1007/s00603-017-1249-4.
  8. Gholami, R., Rasouli, V. and Alimoradi, A. (2013), "Improved RMR rock mass classification using artificial intelligence algorithms", Rock Mech. Rock Eng., 46(5), 1199-1209. https://doi.org/10.1007/s00603-012-0338-7.
  9. Hatzor, Y.H., Feng, X.T., Li, S.J., Yagoda-Biran, G., Jiang, Q. and Hu, L.X. (2015), "Tunnel reinforcement in columnar jointed basalts: The role of rock mass anisotropy", Tunn. Undergr. Sp. Tech., 46, 1-11. https://doi.org/10.1016/j.tust.2014.10.008.
  10. Jing, H.W., Yin, Q., Yang, S.Q. and Chen, W.Q. (2021), "Micromesoscopic creep damage evolution and failure mechanism of sandy mudstone", Int. J. Geomech., 21(3), 04021010. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001940.
  11. Jin, C.Y., Shao, A.L., Liu, D., Han, T., Fan, F.Q. and Li, S.G. (2018), "Failure mechanism of highly stressed rock mass during unloading based on the stress arch theory", Int. J. Geomech., 18(11), 04018146. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001280.
  12. Jiang, Y.J., Li, B. and Yamashita, Y. (2009), "Simulation of cracking near a large underground cavern in a discontinuous rock mass using the expanded distinct element method", Int. J. Rock Mech. Min. Sci., 46(1), 97-106. https://doi.org/10.1016/j.ijrmms.2008.05.004.
  13. Ju, Y., Ren, Z.Y., Zheng, J.T., Gao, F., Mao, L.T., Chiang, F.P. and Xie, H.P. (2020), "Quantitative visualization methods for continuous evolution of three-dimensional discontinuous structures and stress field in subsurface rock mass induced by excavation and construction-An overview", Eng. Geol., 265, 105443. https://doi.org/10.1016/j.enggeo.2019.105443.
  14. Li, Y.J., Zhang, D.L., Fang, Q., Yu, Q.C. and Xia, L. (2014) "A physical and numerical investigation of the failure mechanism of weak rocks surrounding tunnels", Comput. Geotech., 61, 292-307. https://doi.org/10.1016/j.compgeo.2014.05.017.
  15. Malkowski, P. (2015), "The impact of the physical model selection and rock mass stratification on the results of numerical calculations of the state of rock mass deformation around the roadways", Tunn. Undergr. Sp. Tech., 50, 365-375. https://doi.org/10.1016/j.tust.2015.08.004.
  16. Meng, B., Jing, H.W., Chen, K.F. and Su, H.J. (2013), "Failure mechanism and stability control of a large section of very soft roadway surrounding rock shear slip", Int. J. Min. Sci. Technol., 23(1), 127-134. https://doi.org/10.3969/j.issn.2095-2686.2013.01.019.
  17. Mohammadi, M., Hossaini, M.F. and Bagloo, H. (2017), "Rock bolt supporting factor: Rock bolting capability of rock mass", B. Eng. Geol. Environ., 76(1), 231-239. https://doi.org/10.1007/s10064-015-0785-y.
  18. Moussaei, N., Sharifzadeh, M., Sahriar, K. and Khosravi, M.H. (2019), "A new classification of failure mechanisms at tunnels in stratified rock masses through physical and numerical modeling", Tunn. Undergr. Sp. Tech., 91, 103017. https://doi.org/10.1016/j.tust.2019.103017.
  19. Potvin, Y., Dight, P.M. and Wesseloo, J. (2012), "Some pitfalls and misuses of rock mass classification systems for mine design", J. S. Afr. I. Min. Metal., 112(8), 697-702.
  20. Roy, N., Sarkar, R. and Bharti, S.D. (2018), "Prediction model for performance evaluation of tunnel excavation in blocky rock mass", Int. J. Geomech., 18(1), 04017125. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001023.
  21. Tsesarsky, M. and Hatzor, Y.H. (2006), "Tunnel roof deflection in blocky rock masses as a function of joint spacing and friction - A parametric study using discontinuous deformation analysis (DDA)", Tunn. Undergr. Sp. Tech., 21(1), 29-45. https://doi.org/10.1016/j.tust.2005.05.001.
  22. Wang, E.Y., Chen, G.B., Yang, X.J., Zhang, G.F. and Guo, W.B. (2020), "Study on the failure mechanism for coal roadway stability in jointed rock mass due to the excavation unloading effect", Energies, 13(10), 2515. https://doi.org/10.3390/en13102515.
  23. Zhang, Y.T., Ding, X.L., Huang, S.L., Qin, Y., Li, P. and Li, Y.J. (2018), "Field measurement and numerical simulation of excavation damaged zone in a 2000 m-deep cavern", Geomech. Eng., 16(4), 399-413. https://doi.org/10.12989/gae.2018.16.4.399.