Geomechanics and Engineering

  • 제25권3호
  • /
  • Pages.207-219
  • /
  • 2021
  • /
  • 2005-307X(pISSN)
  • /
  • 2092-6219(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Shear wave velocity of fiber reinforced cemented Toyoura silty sand

  • Safdar, Muhammad (Earthquake Engineering Center, Department of Civil Engineering, University of Engineering and Technology) ;
  • Newson, Tim (Department of Civil and Environmental Engineering, Western University) ;
  • Schmidt, Colin (Thurber Engineering Ltd.) ;
  • Sato, Kenichi (Department of Civil Engineering, Fukuoka University) ;
  • Fujikawa, Takuro (Department of Civil Engineering, Fukuoka University) ;
  • Shah, Faheem (Earthquake Engineering Center, Department of Civil Engineering, University of Engineering and Technology)
  • 투고 : 2020.11.27
  • 심사 : 2021.04.19
  • 발행 : 2021.05.10
⟨ 이전 논문 다음 논문 ⟩

초록

Several additives are used to enhance the geotechnical properties (e.g., shear wave velocity, shear modulus) of soils to provide sustainable, economical and eco-friendly solutions in geotechnical and geo-environmental engineering. In this study, piezoelectric ring actuators are used to measure the shear wave velocity of unreinforced, fiber, cemented, and fiber reinforced cemented Toyoura sand. One dimensional oedometer tests are performed on medium dense specimens of Toyoura sand-cement-fiber-silica flour mixtures with different percentages of silica flour (0-42%), fiber and cement (e.g., 0-3%) additives. The experimental results indicate that behavior of the mixtures is significantly affected by the concentration of silica flour, fiber and cement additives. Results show that with the addition of 1-3% of PVA fibers, the shear wave velocity increases by only 1-3%. However, the addition of 1-4% of cement increases the shear wave velocity by 8-35%. 10.5-21% increase of silica flour reduces the shear wave velocity by 2-5% but adding 28-42% silica flour significantly reduces the shear wave velocity by 12-31%. In addition, the combined effect of cement and fibers was also found and with only 2% cement and 1% fiber, the shear wave velocity increase was found to be approximately 24% and with only 3% cement and 3% fibers this increased to 35%. The results from this study for the normalized shear modulus and normalized mean effective stress agree well with previous findings on pure Toyoura sand, Toyoura silty sand, fiber reinforced, fiber reinforced cemented Toyoura sand. Any variations are likely due to the difference in stress history (i.e., isotropic versus anisotropic consolidation) and the measurement method. In addition, these small discrepancies could be attributed to several other factors. The potential factors include the difference in specimen sizes, test devices, methods of analysis for the measurement of arrival time, the use of an appropriate Ko to convert the vertical stresses into mean effective stress, and sample preparation techniques. Lastly, it was investigated that there is a robust inverse relationship between α factor and 𝞫0 exponent. It was found that less compressible soils exhibit higher 𝜶 factors and lower 𝞫0 exponents.

키워드

과제정보

The research project was financially supported by the Western Graduate Research Scholarship at the Department of Civil and Environmental Engineering, Western University, London, Ontario, Canada. The authors would also like to acknowledge the Department of Civil Engineering, Fukuoka University, Fukuoka, Japan for providing Toyoura Sand for the current research project.

참고문헌

  1. Ahmad, S. (2016), "Piezoelectric device for measuring shear wave velocity of soils and evaluation of low and high strain shear modulus", Ph.D. Dissertation, Western University, London, Ontario, Canada.
  2. ASTM Standard (C150/C150M-12) (2011), Standard Specification for Portland Cement, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  3. Bartake, P.P. and Singh, D.N. (2006), "Studies of the determination of shear wave velocity in sands", Geomech. Geoeng., 1-9. https://doi.org/10.1080/17486020601065449.
  4. Cha, M., Santamarina, J., Kim, H. and Cho, G. (2014), "Technical Note. Small strain stiffness, shear wave velocity, and soil compressibility", J. Geotech. Geoenviron. Eng., 140(10), 6014011. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001157
  5. Cho, H.I., Sun, C.G., Kim, J.H. and Kim, D.S. (2018), "OCR evaluation of cohesionless soil in centrifuge model using shear wave velocity", Geomech. Eng., 15(4), 987-995. http://doi.org/10.12989/gae.2018.15.4.987.
  6. Consoli, N.C., Cruz, R.C., Floss, M.F. and Festugato, L. (2010), "Parameters controlling tensile and compressive strength of artificially cemented sand", J. Geotech. Geoenviron. Eng., 136(5), 759-763. https://doi.org/10.1061/(ASCE)GT.1943-5606.0000278.
  7. Elbeggo, D., Hussien, M.N., Ethier, Y. and Karray, M. (2019), "Robustness of the P-RAT in the shear-wave velocity measurement of soft clays", J. Geotech. Geoenviron. Eng., 145(5), 04019014. https://doi.org/10.1061/(ASCE)GT.1943-5606.0002017
  8. Fernandez, A.L. and Santamarina, J.C. (2001), "Effect of cementation on the small-strain parameters of sands", Can. Geotech. J., 38, 191-199. https://doi.org/10.1139/t00-081.
  9. Fonseca, D.A.V., Ferreira, C. and Fahey, M. (2009), "A framework interpreting bender element tests, combining time-domain and frequency-domain methods", Geotech. Test. J., 32(2), 91-107. https://doi.org/10.1520/GTJ100974.
  10. Gamal El-Dean, D. (2007), "Development of a new piezo-electric pulse testing device and soil characterization using shear waves", Ph.D. Dissertation, Universite de Sherbrooke, Southern Quebec, Canada.
  11. Heineck, K.S., Coop, M.R. and Consoli, N.C. (2005), "Effect on microreinforcement of soils from very small to large shear strains", J. Geotech. Geoenviron. Eng., 131(8), 1024-1033. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:8(1024).
  12. Hussien, M. and Karray, M. (2021), "Piezoelectric ring-actuator technique: In-depth scrutiny of interpretation method", Geotech. Test. J., 44(1). https://doi.org/10.1520/GTJ20180205.
  13. Karray, M., Romdhan, M.B., Hussien, M.N. and Ethier, Y. (2015), "Measuring shear wave velocity of granular material using the piezoelectric ring-actuator technique (P-RAT)", Can. Geotech. J., 52(9), 1302-1317. https://doi.org/10.1139/cgj-2014-0306.
  14. Mneina, A., Ahmed, A. and El-Naggar, M.H. (2018), "Dynamic properties of controlled low-strength materials with treated oil sand waste", J. Mater. Civ. Eng., 30(9), 277-285. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002338.
  15. Naji, S., Karray, M. and Khayat, K. (2017), "Versatility of piezoelectric ring actuator technique (P-RAT) for characterization of cement paste and mortar", Adv. Civ. Eng. Mater., 6(1), 189-212. https://doi.org/10.1520/ACEM20160039.
  16. Nakamichi, M. and Sato, K. (2013), "A method of suppressing liquefaction using a solidification material and tension stiffeners", Proceedings of the International Conference on Soil Mechanics and Geotechnical Engineering, Paris, France, September.
  17. Oda, M. (1977), "On the Influence of progressive failure on the bearing capacity of shallow foundations in dense sand", Soils Found., 16, 71-73. https://doi.org/10.3208/sandf1972.16.4_11.
  18. Oztoprak, S. and Bolton, M. D. (2013), "Stiffness of sand through a laboratory test database", Geotechnique, 63(1), 54-70 http://doi.org/10.1680/geot.10.P.078.
  19. Safdar, M. (2018), "Monotonic stress-strain behavior of fiber reinforced cemented Toyoura sand", Ph.D. Dissertation, Western University, London, Ontario, Canada.
  20. Safdar, M., Newson, T., Schmidt, C., Sato, K., Fujikawa, T. and Shah, F. (2020), "Effect of fiber and cement additives on the small-strain stiffness behavior of Toyoura Sand", Sustainability, 12(24), 10468. https://doi.org/10.3390/su122410468.
  21. Salah, D. U. (2012), "Behavior of fiber reinforced cemented sand at high pressures", Ph.D. Dissertation, University of Nottingham, Nottingham, U.K.
  22. Schmidt, C.J. (2015), "Static and dynamic response of silty Toyoura Sand with PVA fiber and cement additives", Master Thesis, Western University, London, Ontario, Canada.
  23. Shirley, D.J. and Hampton, L.D. (1978), "Shear Wave Measurements in Laboratory Sediments", J. Acoust. Soc. Am., 63(2), 607-613. https://doi.org/10.1121/1.381760.
  24. Teachavorasinskun, S. and Pongvithayapanu, P. (2016), "Shear wave velocity of sands subject to large strain triaxial loading", Geomech. Eng., 11(5), 713-723. http://doi.org/10.12989/gae.2016.11.5.713.
  25. Whitlow, R. (2001), Basic Soil Mechanics, Prentice Hall, Upper Saddle River, New Jersey, U.S.A.
  26. Yang, J. and Liu, X. (2016), "Shear wave velocity and stiffness of sand: Rhe role of non-plastic fines", Geotechnique, 66(6), 500-514. http://doi.org/10.1680/jgeot.15.P.205

피인용 문헌

  1. Consolidated drained (CID) behavior of fibre reinforced cemented Toyoura sand in triaxial loading conditions vol.12, pp.1, 2021, https://doi.org/10.1186/s40703-021-00165-0