과제정보
이 논문은 정부(과학기술정보통신부)의 재원으로 한국연구재단-미래소재디스커버리사업의 지원을 받아 수행된 연구임(NRF-2020M3D1A2102359).
참고문헌
- Y.H. Cheng, B.K. Tay, S.P. Lau, and X. Shi, Influence of substrate bias on the structure and mechanical properties of ta-C:W films deposited by filtered cathodic vacuum arc, Surf. Coat. Technol. 146-147 (2001) 398-404. https://doi.org/10.1016/S0257-8972(01)01405-0
- Jung-Hwan In, and Ju Hyeon Choi, Control of residual stress of tetrahedral amorphous carbon thin film deposited on dielectric material by filtered cathodic vacuum arc source by using mid-frequency pulse bias voltage, Surf. Coat. Technol. 349 (2018) 909-916. https://doi.org/10.1016/j.surfcoat.2018.06.004
- D. Sheeja, B.K. Tay, L.J. Yu, S.P. Lau, J.Y. Sze, C.K. Cheong, Effect of frequency and pulse width on the properties of ta:C films prepared by FCVA together with substrate pulse biasing, Thin Solid Films 420-421 (2002) 62-69. https://doi.org/10.1016/S0040-6090(02)00659-4
- Yeong-Sik Kim, and Jae-Dong Kim, Process Optimization for Plasma-sprayed Cr2O3 Coating by Design of Experiments, J. of Power Syst. Eng. 22 (2018) 75-80.
- Young Sik Park, Ha-Mong Shim, Myung Hwan Na, Ho-Chun Song, Sanghoo Yoon, and Keun Sam Jang, Optimization for Electro Deposition Process of PC/ABS Resin Surface Treatment, The Korean Journal of Applied Statistics 27 (2014) 543-552. https://doi.org/10.5351/KJAS.2014.27.4.543
- John Robertson, Plasma Deposition of Diamond-Like Carbon, Jpn. J. Appl. Phys. 50 (2011) 01AF01.
- Y. Lifshitz, S. R. Kasi, J. W. Rabalais, and W. Eckstein, Subplantation model for film growth from hyperthermal species, Phys. Rev. B 41 (1990) 10468-10480. https://doi.org/10.1103/physrevb.41.10468
- Jongkuk Kim, Improvement of Source Stabilization and Beam Transport Efficiency in Filtered Vacuum Arc Source of Carbon, Seoul National University (2000)
- Abdul Wasy Zia, Seunghun Lee, Jong-kuk Kim, Tae Gyu Kim, and Jung II Song, Evaluation of bias voltage effect on diamondlike carbon coating properties deposited on tungsten carbide cobalt, Surf. Interface Anal. 46 (2014) 152-156. https://doi.org/10.1002/sia.5400
- Peng Wang, Xia Wang, Youming Chen, Guangan Zhang, Weimin Liu, and Junyan Zhang, The effect of applied negative bias voltage on the structure of Ti-doped a-C:H films deposited by FCVA, Appl. Surf. Sci. 253 (2007) 3722-3726. https://doi.org/10.1016/j.apsusc.2006.08.003
- Md. Anisur Rahman, P. Maguire, S.S. Roy, R. McCann, F. McKavanagh, and J.A. McLaughlin, sp3 content in ta-C films vs pulse bias width to the substrate: A correlative structural analysis, Diam. Relat. Mater. 18 (2009) 1343-1347. https://doi.org/10.1016/j.diamond.2009.07.009
- Namwoong Paik, Raman and XPS studies of DLC films prepared by a magnetron sputter-type negative ion source, Surf. Coat. Technol. 200 (2005) 2170-2174. https://doi.org/10.1016/j.surfcoat.2004.08.073
- S. Zhang, X.T. Zeng, H. Xie, and P. Hing, A phenomenological approach for the ID/IG ratio and sp3 fraction of magnetron sputtered a-C films, Surf. Coat. Technol. 123 (2000) 256-260. https://doi.org/10.1016/S0257-8972(99)00523-X
- Meng Qi, Jianrong Xiao, Yong Cheng, Zhiyong Wang, Aihua Jiang, Yafang Guo, and Zengren Tao, Effect of various nitrogen flow ratios on the optical properties of (Hf:N)-DLC films prepared by reactive magnetron sputtering, AIP Adv. 7 (2017) 085012. https://doi.org/10.1063/1.4993631
- Ju Hee Kim, Chanhyung Park, and Hyo Sok Ahn, Evaluation of Failure Modes and Adhesion of DLC Films by Scratch Test, J. Korean Soc. Tribol. Lubr. Eng. 33 (2017) 127-133.
- S. J. Bull, Failure mode maps in the thin film scratch adhesion test, Tribol. Int. 30 (1997) 491-498. https://doi.org/10.1016/S0301-679X(97)00012-1
- S.J. Bull, and E.G. Berasetegui, An overview of the potential of quantitative coating adhesion measurement by scratch testing, Tribol. Int. 39 (2006) 99-114. https://doi.org/10.1016/j.triboint.2005.04.013
- Magdalena Lepicka, and Malgorzata Gradzka-Dahlke, The initial evaluation of performance of hard anti-wear coatings deposited on metallic substrates: thickness, mechanical properties and adhesion measurements - a brief review, Rev. Adv. Mater. Sci. 58 (2019) 50-65. https://doi.org/10.1515/rams-2019-0003
- O. Nakonechna, Effect of Cr Dopants on the Structure and Failure Mechanism of TiAlN Multilayered Films, Metallofiz. Noveishie Tekhnol. 41 (2019) 621-631.
- T. Tsui, G. Pharr, W. Oliver, C. Bhatia, R. White, and S. Anders, Nanoindentation and nanoscratching of hard carbon coatings for magnetic disks, Mat. Res. Soc. Symp. Proc. 383 (1995) 447-452.
- Hind Zegtouf, Nadia Saoula, Mourad Azibi, Larbi Bait, Noureddine Madaoui, Mohamed Redha Khelladi, and Mohamed Kechouane, A study of properties of ZrO2 thin films deposited by magnetron sputtering under different plasma parameters: Biomedical application, J. Electr. Eng. 70 (2019) 117-121. https://doi.org/10.2478/jee-2019-0052
- Churl Seung Lee, Jin-koog Shin, Jong-Kuk Kim, Kwang-Ryeol Lee, and Ki Hyun Yoon, The control of the structure and properties of tetrahedral amorphous carbon films prepared by Filtered Vacuum Arc, Journal of the Korean Vacuum Society 11 (2002) 8-15.
- Yong-Jin Kang, Do Hyun Kim, Hojun Ryu, Jongkuk Kim, and Young-Jun Jang, Effects of Process Temperature on the Tribological Properties of Tetrahedral Amorphous Carbon (ta-C) Coating, Tribol. Lubr. 35 (2019) 362-368. https://doi.org/10.9725/kts.2019.35.6.362