과제정보
This work was financially supported by the P3MI ITB 2020 Research Grant and Department of Materials Engineering, Faculty of Mechanical and Aerospace Engineering, Institute of Technology Bandung.
참고문헌
- J. Park and R. S. Lakes, Biomaterials: an introduction, Springer Science & Business Media (2007).
- G. L. Song, Control of Degradation of Biocompatible Magnesium in a Pseudo-Physiological Environment by a Ceramic Like Anodized Coating, Advanced Materials Research, 29-30, 95 (2007). Doi: https://doi.org/10.4028/www.scientific.net/AMR.29-30.95
- M. P. Staiger, A. M. Pietak, J. Huadmai, and G. Dias, Magnesium and its alloys as orthopedic biomaterials: a review, Biomaterials, 27, 1728-1734 (2006). Doi: https://doi.org/10.1016/j.biomaterials.2005.10.003
- A. Ahmed, Anodizing of magnesium alloy AZ31 by alkaline solution, Diyala Journal Of Engineering Sciences, 8, 110 (2015).
- S. Salman, R. Ichino, and M. Okido, Influence of calcium hydroxide and anodic solution temperature on corrosion property of anodising coatings formed on AZ31 Mg alloys, Surface Engineering, 24, 242 (2008). Doi: https://doi.org/10.1179/174329408X282578
- G.-L. Song and Z. Shi, Anodization and corrosion of magnesium (Mg) alloys, Corrosion of Magnesium Alloys, Elsevier, pp. 565-614(2011). Doi: https://doi.org/10.1533/9780857091413.4.565
- H. Duan, C. Yan, and F. Wang, Effect of electrolyte additives on performance of plasma electrolytic oxidation films formed on magnesium alloy AZ91D, Electrochimica Acta, 52, 3785 (2007). Doi: https://doi.org/10.1016/j.electacta.2006.10.066
- X. Guo and M. An, Experimental study of electrochemical corrosion behaviour of bilayer on AZ31B Mg alloy, Corrosion Science, 52, 4017 (2010). Doi: https://doi.org/10.1016/j.corsci.2010.08.017
- A. D. Juhl, Pulse Anodising of Extruded and Cast Aluminium Alloys: Ph. D. Thesis, Department of Manufacturing Engineering, Technical University of Denmark (1999).
- J. Qian, C. Wang, D. Li, B. Guo, and G. Song, Formation mechanism of pulse current anodized film on AZ91D Mg alloy, Transactions of Nonferrous Metals Society of China, 18, 19 (2008). Doi: https://doi.org/10.1016/S1003-6326(08)60004-7
- X. Liu, T. Zhang, Y. Shao, G. Meng, and F. Wang, Effect of alternating voltage treatment on the corrosion resistance of pure magnesium, Corrosion Science, 51, 1772 (2009). Doi: https://doi.org/10.1016/j.corsci.2009.05.002
- Y.-I. Choi, S. Salman, K. Kuroda, and M. Okido, Improvement in corrosion characteristics of AZ31 Mg alloy by square pulse anodizing between transpassive and active regions, Corrosion Science, 63, 5 (2012). Doi: https://doi.org/10.1016/j.corsci.2012.02.010
- A. R. Setiawan, A. Ramelan, A. Nuruddin, and I. U. Hasanah, Effect of Pulse Frequency on the Deposition of Cu-Fe Alloy via Pulsed Current Electrodeposition Method, Key Engineering Materials, 728, 111 (2017). Doi: https://doi.org/10.4028/www.scientific.net/KEM.728.111
- R. S. Williamson, J. Disegi, A. V. Janorkar, J. A. Griggs, and M. D. Roach, Effect of duty cycle on the crystallinity, pore size, surface roughness and corrosion resistance of the anodized surface on titanium, Surface and Coatings Technology, 277, 278 (2015). Doi: https://doi.org/10.1016/j.surfcoat.2015.07.020
- S.-J. Kim, J.-I. Kim, and M. Okido, Sealing effects of anodic oxide films formed on Mg-Al alloys, The Korean Journal of Chemical Engineering, 21, 915 (2004). Doi: https://doi.org/10.1007/BF02705540