Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography (한국측량학회지)

Korean Society of Surveying, Geodesy, Photogrammetry and Cartography (한국측량학회)
권호 표지
DOI QR코드

DOI QR Code

Accuracy Analysis of Road Surveying and Construction Inspection of Underpass Section using Mobile Mapping System

  • Park, Joon Kyu (Department of Civil Engineering, Seoil University) ;
  • Um, Dae Yong (Department of Civil Engineering, Korea National University of Transportation)
  • Received : 2021.04.13
  • Accepted : 2021.04.23
  • Published : 2021.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

MMS (Mobile Mapping System) is being used for HD (High Definition) map construction because it enables fast and accurate data construction, and it is receiving a lot of attention. However, research on the use of MMS in the construction field is insufficient. In this study, road surveying and inspection of construction structures were performed using MMS. Through data acquisition and processing using MMS, point cloud data for the study site was created, and the accuracy was evaluated by comparing with traditional surveying methods. The accuracy analysis results showed a maximum of 0.096m, 0.091m, and 0.093m in the X, Y, and H directions, respectively. Each RMSE was 0.012m, 0.015m, and 0.006m. These result satisfy the accuracy of topographic surveying in the general survey work regulation, indicating that construction surveying using MMS is possible. In addition, a 3D model was created using the design data for the underpass road, and the inspection was performed by comparing it with the MMS data. Through inspection results, deviations in construction can be visually confirmed for the entire underground roadway. The traditional method takes 6 hours for the 4.5km section of the target area, but MMS can significantly shorten the data acquisition time to 0.5 hours. Accurate 3D data is essential data as basic data for future smart construction. With MMS, you can increase the efficiency of construction sites with fast data collection and accuracy.

Keywords

References

  1. Baek, H.N. and Kim, K.H. (2021), Quality Evaluation of 3D Point Maps using Virtual Scan Matching, KIISE Transactions on Computing Practices, Vol. 27, No. 2, pp.83-89. (in Korean with English abstract) https://doi.org/10.5626/KTCP.2021.27.2.83
  2. Cho, B.L, Sun S.G., and Lee, J.M. (2021), A Study on the Implementation of FMCW LiDAR for Detecting Small UAVs, Journal of Korean Institute of Information Technology, Vol. 19, No. 1, pp.99-106. (in Korean with English abstract)
  3. Hong, S.H., Park, I.S., Lee, J.S., Lim, K.Y., Choi, Y.J., and Sohn, H.G. (2017), Utilization of a terrestrial laser scanner for the calibration of mobile mapping systems, Sensors, Vol. 17, No. 3, pp. 1-24. https://doi.org/10.1109/JSEN.2016.2633501
  4. Hwang, H.S., Lee, J.H., and Kim, T.Y. (2018), Parametric Quantity Take-Off of Earthwork by Comparing the Use of Surface and Solid Models, Journal of KIBIM, Vol. 8, No. 1, pp. 56-62. (in Korean with English abstract) https://doi.org/10.13161/KIBIM.2018.8.1.056
  5. Kim, I. (2020), A Study on the Accuracy Evaluation of Extraction Cadastral Boundary using the Mobile Mapping System, Journal of the Korean Society of Cadastre, Vol. 36, No. 2, pp. 55-68. (in Korean with English abstract) https://doi.org/10.22988/KSC.2020.36.2.004
  6. Lee, J.M., Min, K.S., Min, W.K., and Park, H.J. (2020), A Study on the Actively Capture of Road Construction Information Using Spatial Analysis, Journal of the Korean Society of Cadastre, Vol. 36, No. 2, pp. 149-159. (in Korean with English abstract) https://doi.org/10.22988/KSC.2020.36.2.011
  7. Lee, J.S., Yoo, S.H., Hong, S.H., Farkoushi, M.G., Bae, J.S., Park, I.S., and Sohn H.G. (2020), Automated Algorithm for Removing Clutter Objects in MMS Point Cloud for 3D Road Mapping, Sensors, Vol. 20, No. 15, pp. 1-11. https://doi.org/10.1109/JSEN.2019.2959158
  8. Liu, S., Tong, X., Chen, J., Liu, X., Sun, W., Xie, H., Chen, P., Jin, Y., and Ye, Z. (2016), A linear feature-based approach for the registration of unmanned aerial vehicle remotely-sensed images and airborne LiDAR data, Remote Sensing, Vol. 8, No.2, pp. 1-15.
  9. Min, B.H., Yoon, H.S., Choi, Y.S., Seol, J.H, and Lee, T.K. (2020), Verification Research in Continuous Revision of National Base Map Road using MMS Standard Data, Journal of Korean Society for Geospatial Information Science, Vol. 28, No. 3, pp. 59-68. (in Korean with English abstract)
  10. Park, J.K. and Lee, K.W. (2021), DEM Construction and Spatial Analysis of the Planned Construction Site for Establishment of Housing Construction Planning, Journal of the Korea Academia-Industrial cooperation Society, Vol. 22, No. 1, pp. 621-626. (in Korean with English abstract) https://doi.org/10.5762/KAIS.2021.22.1.621
  11. Park, J.W. and Kim, S. (2019), MMS Accuracy Analysis for Earthwork Site Application, Journal of the Korean Society of Industry Convergence, Vol. 22, No. 6, pp. 657-664. (in Korean with English abstract) https://doi.org/10.21289/KSIC.2019.22.6.657
  12. Park, H.K. and Bae, K.H. (2020), Development of DCPT Equipment based on IoT for Rod Tamping in Smart Construction, Journal of the Korea Academia-Industrial cooperation Society, Vol. 21, No. 11, pp. 501-509. (in Korean with English abstract) https://doi.org/10.5762/KAIS.2020.21.11.501
  13. Park, J.K. and Um, D.Y. (2019), Comparison of Accuracy and Characteristics of Digital Elevation Model by MMS and UAV, Journal of the Korea Academia-Industrial cooperation Society, Vol. 20, No. 11, pp. 13-18. (in Korean with English abstract) https://doi.org/10.5762/KAIS.2019.20.11.13
  14. Park, J.K. and Um, D.Y. (2017), Characteristics and Status of Commercial System for Utilizing MMS in Geospatial Information Construction, Journal of Korea Academia-Industrial cooperation Society, Vol. 18, No. 10, pp.36-41. (in Korean with English abstract) https://doi.org/10.5762/KAIS.2017.18.10.36
  15. Ryu, J.M. and Kim, D.H. (2014), Study on Wireless Control of a Board Robot Using an IMU sensor, Journal of Korean Institute of Intelligent Systems, Vol. 24, No. 2, pp. 186-192. (in Korean with English abstract) https://doi.org/10.5391/JKIIS.2014.24.2.186
  16. Tsai, C.H. and Lin, Y.C. (2017), An accelerated image matching technique for UAV orthoimage registration, ISPRS Journal of Photogrammetry and Remote Sensing, Vol. 128, pp. 130-145. https://doi.org/10.1016/j.isprsjprs.2017.03.017
  17. The National Law Information Center. http://www.law.go.kr/ (accessed on 19th March 2021).
  18. Trimble Inc. http://www.trimble.com/ (accessed on 19th March 2021).