과제정보
본 논문은 2021년도 한국표준과학연구원의 수소스테이션 신뢰성 평가기술 개발 재원으로 지원을 받아 수행된 연구입니다(한국표준과학연구원-2021-GP2021-0007).
참고문헌
- F. F. Dear and G. C. G. Skinner, "Mechanisms of hydrogen embrittlement in steels: discussion", Phil. Trans. R. Soc. A, Vol. 375, 2017, pp. 0032, doi: http://dx.doi.org/10.1098/rsta.2017.0032.
- I. M. Robertson, P. Sofronis, A. Nagao, M. L. Martin, S. Wang, D. W. Gross, and K. E. Nygren, "Hydrogen embrittlement understood", Metall. Mater. Trans. A, Vol. 46, 2015, pp. 2323-2341, doi: http://dx.doi.org/10.1007/s11661-015-2836-1.
- B. W. Kang and T. H. Lee, "An investigation of hazard distance in a series of hydrogen jet fire with the hyram tools", Trans Korean Hydrogen and New Energy Soci, Vol. 28, No. 2, 2017, pp. 166-173, doi: https://doi.org/10.7316/KHNES.2017.28.2.166.
- J. Yamabe, H. Fujiwara, and S. Nishimura, "Fracture analysis of rubber sealing material for high pressure hydrogen vessel", J. Environ. Eng., Vol. 6, No. 1, 2011, pp. 53-68, doi: https://doi.org/10.1299/jee.6.53.
- J. Yamabe, A. Koga, and S. Nishimura, "Failure behavior of rubber O-ring under cyclic exposure to high-pressure hydrogen gas", Eng. Fail. Anal., Vol. 35, 2013, pp. 193-205, doi: https://doi.org/10.1016/j.engfailanal.2013.01.034.
- A. Koga, K. Uchida, J. Yamabe, and S. Nishimura, "Evaluation on high-pressure hydrogen decompression failure of rubber O-ring using design of experiments", Int. J. Automot. Eng., Vol. 2, 2011, pp. 123-129, doi: https://doi.org/10.20485/jsaeijae.2.4_123.
- R. R. Barth, K. L. Simmons, and C. S. Marchi, "Polymers for hydrogen infrastructure and vehicle fuel systems: applications, properties, and gap analysis", Sandia Report, 2013.
- H. Fujiwara, H. Ono, and S. Nishimura, "Degradation behavior of acrylonitrile butadiene rubber after cyclic high-pressure hydrogen exposure", Int. J. Hydrog. Energy., Vol. 40, No. 4, 2015, pp. 2025-2034, doi: https://doi.org/10.1016/j.ijhydene.2014.11.106.
- S. Nishimura, "International symposium of hydrogen polymers team, hydrogenius", Kyushu University, Japan, 2017.
- J. Yamabe and S. Nishimura, "Influence of fillers on hydrogen penetration properties and blister fracture of rubber composites for O-ring exposed to high-pressure hydrogen gas", Int. J. Hydrog. Energy., Vol. 34, No. 4, 2009, pp. 1977-1989, doi: https://doi.org/10.1016/j.ijhydene.2008.11.105.
- American Society for Testing and Materials (ASTM). Standard test method for determining gas permeability characteristics of plastic film and sheeting. Philadelphia, PA: American Society for Testing and Materials (ASTM); 1982.
- T. Lu, R. Xu, B. Zhou, Y. Wang, F. Zhang, and P. Jiang, "Improved method for measuring the permeability of nanoporous material and its application to shale matrix with ultra-low permeability", Materials, Vol. 12, No. 9, 2019, pp. 1567, doi: https://doi.org/10.3390/ma12091567.
- S. Ding and W. T. Petuskey, "Solutions to Fick's second law of diffusion with a sinusoidal excitation", Solid State Ion., Vol. 109, No. 1-2, 1998, pp. 101-110, doi: https://doi.org/10.1016/S0167-2738(98)00103-9.
- A. Demarez, A. G. Hock, and F. A. Meunier, "Diffusion of hydrogen in mild steel", Acta. Metall., Vol. 2, No. 2, 1954, pp. 214-223, doi: https://doi.org/10.1016/0001-6160(54)90162-5.
- Working Group 1 of the Joint Committee for Guides in Metrology (JCGM/WG 1), "Evaluation of measurement data-guide to the expression of uncertainty in measurement", Joint Committee for Guides in Metrology, 2008.
- CSA ANSI CHMC 2:19, "Test methods for evaluating material compatibility in compressed hydrogen applications-polymers", CSA Group, 2019.