과제정보
This work is supported by the National Natural Science Foundation of China (No. 52075350) and the Sichuan Major Science and Technology Project (No.2019ZDZX0001).
참고문헌
- T.-T. Tran, A.-T. Cao, T.-H.-X. Nguyen, et al., Fragility assessment for electric cabinet in nuclear power plant using response surface methodology, Nuclear Engineering and Technology 51 (3) (2019) 894-903. https://doi.org/10.1016/j.net.2018.12.025
- Z.R. Lu Yonggang, Qiang Fu, Xiuli Wang, Ce An, Jing Chen, Research on the structure design of the LBE reactor coolant pump in the lead base heap, Nuclear Engineering and Technology 51 (2019) 546-555. https://doi.org/10.1016/j.net.2018.09.023
- J.B.-G. Kim Sung-Wan, Hahm Dae-Gi, Kim Min-Kyu Seismic fragility evaluation of the base-isolated nuclear power plant piping system using the failure criterion based on stress-strain, Nuclear Engineering and Technology 51 (2019) 561-572. https://doi.org/10.1016/j.net.2018.10.006
- M.R. Kacal, F. Akman, M.I. Sayyed, et al., Evaluation of gamma-ray and neutron attenuation properties of some polymers, Nuclear Engineering and Technology 51 (3) (2019) 818-824. https://doi.org/10.1016/j.net.2018.11.011
- S. Abdullahi, A.F. Ismail, S. Samat, Determination of indoor doses and excess lifetime cancer risks caused by building materials containing natural radionuclides in Malaysia, Nuclear Engineering and Technology 51 (1) (2019) 325-336. https://doi.org/10.1016/j.net.2018.09.017
- A. Tanaka, K. Futahashi, K. Takanabe, et al., Development of a 3-D simulation analysis system for PWR control rod drive mechanism, Int. J. Pres. Ves. Pip. 85 (9) (2008 Sep) 655-661. https://doi.org/10.1016/j.ijpvp.2008.04.007
- Z. Lin, L. Zhai, L. Zhu, et al., Control rod drop dynamic analysis in the TMSR - SF1 based on numerical simulation and experiment, Nucl. Eng. Des. 322 (2017) 131-137. https://doi.org/10.1016/j.nucengdes.2017.06.031
- J. Park, W. Lee, M. Lee, et al., Development of an in-vessel CEDM for small modular reactors, Nucl. Technol. 206 (3) (2019) 435-443. https://doi.org/10.1080/00295450.2019.1635363
- J.H. Lee, S. Kim, Y.-S. Yoo, et al., Bottom-mounted control rod drive mechanism for KJRR, Nucl. Eng. Des. 300 (2016) 222-230. https://doi.org/10.1016/j.nucengdes.2016.01.036
- K. Ahn, J.-S. Lee, Dynamic equivalent model of a SMART control rod drive mechanism for a seismic analysis, Nuclear Engineering and Technology 52 (8) (2020) 1834-1846. https://doi.org/10.1016/j.net.2020.01.009
- F. Wang, Q. Shen, Aging mechanism and effect analysis of control rod drive mechanism, Mech. Eng. (6) (2014) 94-97.
- X. Tang, B. Yang, X. Chen, et al., Research on lift Pole thread fatigue of magnetic lifting control rod drive mechanism, Nucl. Power Eng. 34 (S1) (2013) 112-115.
- H. Zhen, Y. Zhong, Y. Wang, et al., Longeval control rod drive M echanism hot life test for advance pressurized water reactor, Nucl. Power Eng. (S1) (2002) 70-73.
- D. Hertz, Approach to analysis of wear mechanisms in the case of RCCAs and CRDM latch arms: from observation to understanding, Wear 261 (9) (2006) 1024-1031. https://doi.org/10.1016/j.wear.2006.03.037
- Z. Sun, S. Liu, X. Ran, et al., Analysis and optimization of kinematic pair force in control rod drive mechanism, Nucl. Power Eng. 36 (3) (2015) 90-93.
- X. Chen, F. Yang, X. Yang, et al., Research on the optimal design and manufacture of ACP1000 control rod drive mechanism latch, Machine Design and Manufacturing Engineering 45 (10) (2016) 74-78.
- F.L. Gao, Y.C. Bai, C. Lin, et al., A time-space Kriging-based sequential metamodeling approach for multi-objective crashworthiness optimization, Appl. Math. Model. 69 (2019) 378-404. https://doi.org/10.1016/j.apm.2018.12.011
- M. Ou, L. Yan, W. Huang, et al., Design exploration of combinational spike and opposing jet concept in hypersonic flows based on CFD calculation and surrogate model, Acta Astronaut. 155 (2019) 287-301. https://doi.org/10.1016/j.actaastro.2018.12.012
- J-h Wu, X-w Zhen, G. Liu, et al., Optimization design on the riser system of next generation subsea production system with the assistance of DOE and surrogate model techniques, Appl. Ocean Res. 85 (2019) 34-44. https://doi.org/10.1016/j.apor.2019.01.035
- J. Grobbel, S. Brendelberger, M. Henninger, et al., Calibration of parameters for DEM simulations of solar particle receivers by bulk experiments and surrogate functions, Powder Technol. 364 (2020) 831-844. https://doi.org/10.1016/j.powtec.2019.11.028
- M. Xi, D. Lu, D. Gui, et al., Calibration of an agricultural-hydrological model (RZWQM2) using surrogate global optimization, J. Hydrol. 544 (2017) 456-466. https://doi.org/10.1016/j.jhydrol.2016.11.051
- M. Mishra, R. Derakhshani, G.C. Paiva, et al., Nonlinear surrogate modeling of tibio-femoral joint interactions, Biomed. Signal Process Contr. 6 (2) (2011) 164-174. https://doi.org/10.1016/j.bspc.2010.08.005
- S. Vakili, M.S. Gadala, Low cost surrogate model based evolutionary optimization solvers for inverse heat conduction problem, Int. J. Heat Mass Tran. 56 (1-2) (2013) 263-273. https://doi.org/10.1016/j.ijheatmasstransfer.2012.09.009
- P. Westermann, R. Evins, Surrogate modelling for sustainable building design - a review, Energy Build. 198 (2019) 170-186. https://doi.org/10.1016/j.enbuild.2019.05.057
- Y. Ni, X. Du, P. Ye, et al., Frequent pattern mining assisted energy consumption evolutionary optimization approach based on surrogate model at GCC compile time, Swarm and Evolutionary Computation 50 (2019). https://doi.org/10.1016/j.swevo.2019.01.009
- O.B. Ericok, A.K. Ozbek, A.T. Cemgil, et al., Gaussian process and design of experiments for surrogate modeling of optical properties of fractal aggregates, J. Quant. Spectrosc. Radiat. Transf. 239 (2019).
- M. Belyaev, E. Burnaev, E. Kapushev, et al., GTApprox: surrogate modeling for industrial design, Adv. Eng. Software 102 (2016) 29-39. https://doi.org/10.1016/j.advengsoft.2016.09.001
- M.D. Pandey, F.J. Tallavo, N.C. Christodoulou, et al., Understanding the mechanics of creep deformation to develop a surrogate model for contact assessment in CANDU® fuel channels, Nucl. Eng. Des. 330 (2018) 141-156. https://doi.org/10.1016/j.nucengdes.2018.01.032
- S.R. Prabhu, M.D. Pandey, N. Christodoulou, et al., A surrogate model for the 3D prediction of in-service deformation in CANDU® fuel channels, Nucl. Eng. Des. (2020) 369.
- G.A. Banyay, M.D. Shields, J.C. Brigham, Efficient global sensitivity analysis for flow-induced vibration of a nuclear reactor assembly using Kriging surrogates, Nucl. Eng. Des. 341 (2019) 1-15. https://doi.org/10.1016/j.nucengdes.2018.10.013
- Q. Wei, Y. Li, X. Ran, Dynamic analysis of CRDM loads during stepping motion, Nucl. Power Eng. 35 (4) (2014) 13-16.
- A.N. Eraslan, Stress distributions in elastic-plastic rotating disks with elliptical thickness profiles using Tresca and von Mises criteria, ZAMM - Journal of Applied Mathematics and Mechanics/Z. Angew. Math. Mech. 85 (4) (2005) 252-266. https://doi.org/10.1002/zamm.200210177
- C.J. Zhu, X.L. Xie, L. Lai, et al., Study of Two Important Plastic Indexes of Tresca Yield Criterion and Mises Yield Criterion, 2005.
- L. Li, F. Wang, Y. Wang, Friction pair test of latch of control rod drive mechanism, Physical Testing and Chemical Analysis(Part A:Physical Testing) 52 (6) (2016) 384-388.
- L. Li, F. Wang, Y. Wang, Study on manufacturing process of Stellite6 alloy investment castings of control rod drive mechanism latch, Hot Work. Technol. 45 (15) (2016) 75-77.
- E. Acar, Effects of the correlation model, the trend model, and the number of training points on the accuracy of Kriging metamodels, Expet Syst. 30 (5) (2013) 418-428. https://doi.org/10.1111/j.1468-0394.2012.00646.x
- A. Hasani, S.M.H. Hosseini, A bi-objective flexible flow shop scheduling problem with machine-dependent processing stages: trade-off between production costs and energy consumption, Appl. Math. Comput. (2020) 386.