DOI QR코드

DOI QR Code

Research on the factors affecting the development of shrinkage cracks of rammed earth buildings

  • Zhao, Xiang (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Cai, Hengli (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Zhou, Tiegang (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Liu, Ling (School of Civil Engineering, Xi'an University of Architecture and Technology) ;
  • Ding, Yijie (School of Civil Engineering, Xi'an University of Architecture and Technology)
  • 투고 : 2019.04.10
  • 심사 : 2021.04.03
  • 발행 : 2021.04.25

초록

Rammed earth (RE) buildings have existed all over the world for thousands of years, and have gained increasing attention because of its sustainable advantages, however, the shrinkage cracks reduce its bearing capacity and seriously affect its durability and applicability. In this study, the shrinkage cracks test was carried out to investigate the effects of initial water content, proportion of sand and gravel, compaction degree, thickness and the additives (polypropylene fiber, cement and sodium silicate) of shrinkage cracks in RE buildings, ten groups of RE samples were prepared and dried outdoors to crack. Four quantitative parameters of geometrical structure of crack patterns were used to evaluate the development of cracks. The results show that the specimens cracking behavior and the geometrical structure of crack patterns are significantly influenced by these considered factors. The formation of crack can be accelerated with the increase of initial water content and thickness of specimen, while restricted with the increase of the compaction degree and the proportion of sand and gravel. Moreover, the addition of 1% polypropylene fiber, 10% cement and 0.5 volume ratio sodium silicate can significantly restrain the form and development of cracks. In RE construction, these factors should be considered comprehensively to prevent the harm caused by shrinkage cracks. Further works should be carried out to obtain the optimum dosage of the additives, which can benefit the construction of RE buildings in future.

키워드

참고문헌

  1. Arslan, M.E., Emiroglu, M. and Yalama, A. (2017), "Structural behavior of rammed earth walls under lateral cyclic loading: a comparative experimental study", Construct. Build. Mater., 133(15), 433-442. https://doi.org/10.1016/j.conbuildmat.2016.12.093.
  2. Carrillo, J. and Avila, W. (2017), "Assessment of seismic damage of thin and lightly reinforced concrete walls using fractal dimension of cracking", Earthq. Eng. Struct. Dyn., 46(4), 661-675. https://doi.org/10.1002/eqe.2808.
  3. Ciancio, D., Jaquin, P. and Walker, P. (2013), "Advances on the assessment of soil suitability for rammed earth", Construct. Build. Mater., 42, 40-47. https://doi.org/10.1016/j.conbuildmat.2012.12.049.
  4. Clementi, F., Lenci, S. and Sadowski, T. (2008), "Fracture characteristics of unfired earth", Int. J. Fracture, 149(2), 193-198. https://doi.org/10.1007/s10704-008-9239-x.
  5. Hall M. and Djerbib Y. (2004), "Rammed earth sample production: context, recommendations and consistency", Construct. Build. Mater., 18(4), 281-286. https://doi.org/10.1016/j.conbuildmat.2003.11.001.
  6. Jain, D., Mukherjee, A., Porter, H. and Blake, J. (2019), "Enhanced thermal resistance of rammed earth blocks with recycled industry by-products", Int. J. Thermal Sci., 138, 447-458. https://doi.org/10.1016/j.ijthermalsci.2019.01.017.
  7. Jian, W.B., Zhang, D. and Huang, C.X. (2013), "Micromechanism of cement-sodium silicate-stabilized soft soils", Chinese J. Geotech. Eng., 35(S2):632-637.
  8. Kariyawasam, K.K.G.K.D. and Jayasinghe, C. (2016), "Cement stabilized rammed earth as a sustainable construction material", Construct. Build. Mater., 105, 519-527. https://doi.org/10.1016/j.conbuildmat.2015.12.189.
  9. Kayyal, M.K. (1995), "Effect of the moisture evaporative stages on the development of shrinkage cracks in soil", Proc. First International Conference on Unsaturated Soils, 373-379.
  10. Lenci, S., Clementi, F. and Sadowski, T. (2012), "Experimental determination of the fracture properties of unfired dry earth", Eng. Fracture Mech., 87, 62-72. https://doi.org/10.1016/j.engfracmech.2012.03.005.
  11. Lenci, S., Piattoni, Q., Clementi, F. and Sadowski, T. (2011), "An experimental study on damage evolution of unfired dry earth under compression", Int. J. Fracture, 172(2), 193-200. https://doi.org/10.1007/s10704-011-9651-5.
  12. Maso, E.B., Gil, L. and Escrig, C. (2016), "Textile-reinforced rammed earth: Experimental characterisation of flexural strength and thoughness", Construct. Build. Mater., 106, 470-479. https://doi.org/10.1016/j.conbuildmat.2015.12.139.
  13. Miccoli, L., Muller, U. and Fontana, P. (2014), "Mechanical behaviour of earthen materials: a comparison between earth block masonry, rammed earth and cob", Construct. Build. Mater., 61(30), 327-339. https://doi.org/10.1016/j.conbuildmat.2014.03.009.
  14. Morris, P. H., Graham, J. and Williams, D. J. (1992), "Cracking in drying soils", Canadian Geotech. J., 29(2), 263-277. https://doi.org/10.1139/t92-030.
  15. Nahlawi, H. and Kodikara, J.K. (2006), "Laboratory experiments on desiccation cracking of thin soil layers", Geotech. Geolog. Eng., 24(6), 1641-1664. https://doi.org/10.1007/s10706-005-4894-4.
  16. Niroumand, H., Zain, M. and Jamil, M. (2013), "A guideline for assessing of critical parameters on Earth architecture and Earth buildings as a sustainable architecture in various countries", Renew. Sustain. Energy Rev., 28, 130-165. https://doi.org/10.1016/j.rser.2013.07.020.
  17. Tang, C., Shi, B., Liu, C., Zhao, L. and Wang, B. (2008), "Influencing factors of geometrical structure of surface shrinkage cracks in clayey soils", Eng. Geology, 101(3-4), 204-217. https://doi.org/10.1016/j.enggeo.2008.05.005.
  18. Tang, C.S., Shi, B. and Zhao, L.Z. (2010), "Interfacial shear strength of fiber reinforced soil", Geotext. Geomembranes, 28(1), 54-62. https://doi.org/10.1016/j.geotexmem.2009.10.001.
  19. Tang, C.S., Shi, B., Cui, Y.J., Liu, C. and Gu, K. (2012), "Desiccation cracking behaviour of polypropylene fiber-reinforced clayey soil", Canadian Geotech. J., 49(9), 1088-1101. https://doi.org/10.1139/t2012-067.
  20. Xu P., Hatami K. and Jiang G. (2020), "Study on seismic stability and performance of reinforced soil walls using shaking table tests", Geotext. Geomembranes, 48(1), 82-97. https://doi.org/10.1016/j.geotexmem.2019.103507.
  21. Zhou T. and Liu B. (2019), "Experimental study on the shaking table tests of a modern inner-reinforced rammed earth structure", Construct. Build. Mater., 203, 567-578. https://doi.org/10.1016/j.conbuildmat.2019.01.070.