DOI QR코드

DOI QR Code

Numerical Study on Seismic Behavior of a Three-Story RC Shear Wall Structure

3층 전단벽 구조물의 지진응답에 관한 수치해석

  • Park, Dawon (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Choi, Youngjun (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology) ;
  • Hong, Jung-Wuk (Department of Civil and Environmental Engineering, Korea Advanced Institute of Science and Technology)
  • 박다원 (한국과학기술원 건설및환경공학과) ;
  • 최영준 (한국과학기술원 건설및환경공학과) ;
  • 홍정욱 (한국과학기술원 건설및환경공학과)
  • Received : 2021.02.03
  • Accepted : 2021.04.02
  • Published : 2021.05.01

Abstract

A shear wall is a structural member designed to effectively resist in-plane lateral forces, such as strong winds and earthquakes. Due to its efficiency and stability, shear walls are often installed in residential buildings and essential facilities such as nuclear power plants. In this research, to predict the results of the shaking table test of the three-story shear wall RC structure hosted by the Korea Atomic Energy Research Institute, three types of numerical modeling techniques are proposed: Preliminary, Calibrated 1, and Calibrated 2 models, in order of improvement. For the proposed models, an earthquake of the 2016 Gyeongju, South Korea (peak ground acceleration of 0.28 g) and its amplified earthquake (peak ground acceleration of 0.50 g) are input. The response spectra of the measuring points are obtained by numerical analysis. Good agreement is observed in the comparisons between the experiment results and the simulation conducted on the finally adopted numerical model, Calibrated 2. In the process of improving the model, this paper investigates the influences of the mode shape, material properties, and boundary conditions on the structure's seismic behavior.

Keywords

References

  1. Nagae T, Ghannoum WM, Kwon J, Tahara K, Fukuyama K, Matsumori T, Shiohara H, Kabeyasawa T, Kono S, Nishiyama M, Sause R, Wallace JW, Moehle JP. Design implications of large scale shake table test on four story reinforced concrete building. ACI Structural Journal. 2015 Mar;112(2):135-146. https://doi.org/10.14359/51687421
  2. Marios P, Jose IR, Joel P. Shake table test of a full scale 7 story building slice. Phase I: Rectangular wall. Journal of Structural Engineering. 2011 Jun;137(6):691-704. https://doi.org/10.1061/(asce)st.1943-541x.0000332
  3. Qiu C, Zhu S. Shake table test and numerical study of self-centering steel frame with SMA braces. Earthquake Engineering and Structural Dynamics. 2017 Jan;46(1):117-137. https://doi.org/10.1002/eqe.2777
  4. Chen J, Liu Y, Bai X. Shaking table test and numerical analysis of offshore wind turbine tower systems controlled by TLCD. Earthquake Engineering and Engineering Vibration. 2015 Mar;14(1):55-75. https://doi.org/10.1007/s11803-015-0006-5
  5. Solnosky R, Kevin M. Shear wall design in residential construction: a comparison of methods. 3rd Residential Building Design and Construction Conference. 2016 Mar:187-202.
  6. Jeon S, Park J. Approximate analysis for shear force amplification effect in ordinary R C shear walls. Journal of the Earthquake Engineering Society of Korea. 2020 May;24(3):129-139. https://doi.org/10.5000/EESK.2020.24.3.129
  7. Murty CVR. Learning earthquake design and construction - 23. Why are buildings with shear walls preferred in seismic regions? Resonance - Journal of Science Education. 2005 Nov;10(11):85-88.
  8. Firoj M, Singh SK. Response spectrum analysis for irregular multistorey structure in seismic zone V. 16th Symposium on Earthquake Engineering. 2018 Dec:300.
  9. Hudson DE. Response spectrum techniques in engineering seismology. Proceedings of The First World Conference on Earthquake Engineering. c1956.
  10. Armen DK, Ansgar N. Response spectrum method for multi-support seismic excitations. Earthquake Engineering and Structural Dynamics. 1992 Feb;21:713-740. https://doi.org/10.1002/eqe.4290210805
  11. Jankowski R. Non-linear fem analysis of earthquake-induced pounding between the main building and the stairway tower of the olive view hospital. Engineering Structures. 2009 Aug;31(8):1851-1864. https://doi.org/10.1016/j.engstruct.2009.03.024
  12. Peter H, Rene de B. Constitutive model for reinforced concrete. Journal of Engineering Mechanics. 1995 May;121(5):587-595. https://doi.org/10.1061/(ASCE)0733-9399(1995)121:5(587)
  13. LS-DYNA Keyword User'S Manual, Version 971, Volume I, Livermore Technology Software Corporation (LSTC). 2007 May:615-625.
  14. Jiang H, Zhao J. Calibration of the continuous surface cap model for concrete. Finite Elements In Analysis And Design. 2015 May;97:1-19. https://doi.org/10.1016/j.finel.2014.12.002
  15. Noguchi T, Tomosawwa F, Nemati KM, Chiaia BM, Fantilli AR. A practical equation for elastic modulus of concrete. ACI Structural Journal. 2009 Sep;106(5):690-696.
  16. Huang X, Kwon OS. Numerical models of RC elements and their impacts on seismic performance assessment. Earthquake Engineering and Structural Dynamics. 2015 Feb;44(2):283-298. https://doi.org/10.1002/eqe.2471
  17. Elwood KJ, Eberhard MO. Effective stiffness of reinforced concrete columns. ACI Structural Journal. 2009 Jul;106(4):476-484.
  18. Calvello M, Finno RJ. Selecting parameters to optimize in model calibration by inverse analysis. Computers and Geotechnics. 2004 May;31(5):411-425.