DOI QR코드

DOI QR Code

Numerical model for local corrosion of steel reinforcement in reinforced concrete structure

  • Chen, Xuandong (College of Mechanics and Materials, Hohai University) ;
  • Zhang, Qing (College of Mechanics and Materials, Hohai University) ;
  • Chen, Ping (College of Civil and Architecture Engineering, Guilin University of Technology) ;
  • Liang, Qiuqun (College of Science, Guilin University of Technology)
  • 투고 : 2020.02.27
  • 심사 : 2021.03.22
  • 발행 : 2021.04.25

초록

Reinforcement corrosion is the main cause of the durability failure of reinforced concrete (RC) structure. In this paper, a three-dimensional (3D) numerical model of macro-cell corrosion is established to reveal the corrosion mechanisms of steel reinforcement in RC structure. Modified Direct Iteration Method (MDIM) is employed to solve the system of partial differential equations for reinforcement corrosion. Through the sensitivity analysis of electrochemical parameters, it is found that the average corrosion current density is more sensitive to the change of cathodic Tafel slope and anodic equilibrium potential, compared with the other electrochemical parameters. Furthermore, both the anode-to-cathode (A/C) ratio and the anodic length have significant influences on the average corrosion current density, especially when A/C ratio is less than 0.5 and anodic length is less than 35 mm. More importantly, it is demonstrated that the corrosion rate of semi-circumferential corrosion is much larger than that of circumferential corrosion for the same A/C ratio value. The simulation results can give a unique insight into understanding the detailed electrochemical corrosion processes of steel reinforcement in RC structure for application in service life prediction of RC structures in actual civil engineer.

키워드

참고문헌

  1. Angst, U., Elsener, B., Larsen, C.K. and Vennesland, O. (2011), "Chloride induced reinforcement corrosion: Rate limiting step of early pitting corrosion", Electrochim. Acta, 56(17), 5877-5889. https://doi.org/10.1016/j.electacta.2011.04.124.
  2. Bentz, D.P., Garboczi, E.J., Lu, Y., Martys, N., Sakulich, A.R. and Weiss, W.J. (2013), "Modeling of the influence of transverse cracking on chloride penetration into concrete", Cement Concrete Compos., 38, 65-74. https://doi.org/10.1016/j.cemconcomp.2013.03.003.
  3. Cao, C. (2014), "3D simulation of localized steel corrosion in chloride contaminated reinforced concrete", Constr. Build. Mater., 72, 434-443. https://doi.org/10.1016/j.conbuildmat.2014.09.030.
  4. Cao, C. and Cheung, M.S. (2014), "Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures", Constr. Build. Mater., 51, 75-81. https://doi.org/10.1016/j.conbuildmat.2013.10.042.
  5. Cao, C., Cheung M.S. and Chan B.Y. (2012), "Modelling of interaction between corrosion-induced concrete cover crack and steel corrosion rate", Corros. Sci., 69, 97-109. https://doi.org/10.1016/j.corsci.2012.11.028.
  6. Cheung, M.M.S. and Cao, C. (2013), "Application of cathodic protection for controlling macro-cell corrosion in chloride contaminated RC structures", Constr. Build. Mater., 45, 199-207. https://doi.org/10.1016/j.conbuildmat.2013.04.010.
  7. Elmoaty, A.E.M.A. (2018), "Four-years carbonation and chloride induced steel corrosion of sulfate-contaminated aggregates concrete", Constr. Build. Mater., 163(28), 539-556. https://doi.org/10.1016/j.conbuildmat.2017.12.128.
  8. Ge, J. and Isgor, O.B. (2007), "Effects of Tafel slope, exchange current density and electrode potential on the corrosion of steel in concrete", Mater. Corros., 58(8), 573-82. https://doi.org/10.1002/maco.200604043.
  9. Gerengi, H., Kocak, Y., Jazdzewska, A. and Kurtay, M. (2017), "Corrosion behavior of concrete produced with diatomite and zeolite exposed to chlorides", Comput. Concrete, 19(2), 161-169. https://doi.org/10.12989/cac.2017.19.2.161.
  10. Ghods, P., Isgor, O.B. and Pour-Ghaz, M. (2007), "A practical method for calculating the corrosion rate of uniformly depassivated reinforcing bars in concrete", Mater. Corros., 58(4), 265-272. https://doi.org/10.1002/maco.200604010.
  11. Ghods, P., Isgor, O.B. and Pour-Ghaz, M. (2008), "Experimental verification and application of a practical corrosion model for uniformly de-passivated steel in concrete", Mater. Struct., 41(7), 1211-1223. https://doi.org/10.1617/s11527-007-9320-3.
  12. Greenwald, M. (2004), "Beyond benchmarking-how experiments and simulations can work together in plasma physics", Comput. Phys. Commun., 164(1), 1-8. https://doi.org/10.1016/j.cpc.2004.06.001.
  13. Hay, R. and Ostertag, C.P. (2019), "Influence of transverse cracks and interfacial damage on corrosion of steel in concrete with and without fiber hybridization", Corros. Sci., 153, 213-224. https://doi.org/10.1016/j.corsci.2019.03.020.
  14. Hornbostel, K., Angst, U.M., Elsener, B., Larsen, C.M. and Geiker, M.R. (2016), "Influence of mortar resistivity on the rate-limiting step of chloride-induced macro-cell corrosion of reinforcing steel", Corros. Sci., 110, 46-56. https://doi.org/10.1016/j.corsci.2016.04.011.
  15. Hornbostel, K., Larsen, C.K., Geiker, M.R. (2013), "Relationship between concrete resistivity and corrosion rate-A literature review", Cement Concrete Compos., 39, 60-72. https://doi.org/10.1016/j.cemconcomp.2013.03.019.
  16. Kanchanadevi, A. and Ramanjaneyulu, K. (2019), "Investigations on the behavior of corrosion damaged gravity load designed beam-column sub-assemblages under reverse cyclic loading", Earthq. Struct., 16(2), 235-251. https://doi.org/10.12989/eas.2019.16.2.235.
  17. Kim, C. and Kim, J. (2008), "Numerical analysis of localized steel corrosion in concrete", Constr. Build Mater., 22(6), 1129-1136. https://doi.org/10.1016/j.conbuildmat.2007.02.007.
  18. Kranc, S.C. and Sagues, A.A. (2001), "Detailed modeling of corrosion macro-cells on steel reinforcing in concrete", Corros. Sci., 43(7), 1355-1372. https://doi.org/10.1016/S0010-938X(00)00158-X.
  19. Laurens, S., Henocq, P., Rouleau, N., Deby, F., Samson, E. and Marchand, J. (2016), "Steady-state polarization response of chloride-induced macro-cell corrosion systems in steel reinforced concrete-numerical and experimental investigations", Cement Concrete Res., 79, 272-290. https://doi.org/10.1016/j.cemconres.2015.09.021.
  20. Liang, C., Ma, H., Pan, Y., Ma, Z., Duan, Z. and He, Z. (2019), "Chloride permeability and the caused steel corrosion in the concrete with carbonated recycled aggregate", Constr. Build Mater., 218, 506-518. https://doi.org/10.1016/j.conbuildmat.2019.05.136.
  21. Michel, A., Otieno, M., Stang, H. and Geiker, M.R. (2016), "Propagation of steel corrosion in concrete: Experimental and numerical investigations", Cement Concrete Compos., 70, 171-182. https://doi.org/10.1016/j.cemconcomp.2016.04.007.
  22. Mohammadian, A., Rashetnia, R., Lucier, G., Seracino, R. and Pour-Ghaz, M. (2019), "Numerical simulation and experimental corroboration of galvanic corrosion of mild steel in synthetic concrete pore solution", Cement Concrete Compos., 103, 263-278. https://doi.org/10.1016/j.cemconcomp.2019.04.027.
  23. Pang, C., Zhou, X. and Chen, A. (2019), "Numerical study of ITZ contribution on diffusion of chloride and induced rebar corrosion: A discussion of three-dimensional multiscale approach", Comput. Concrete, 23(1), 69-80. https://doi.org/10.12989/cac.2019.23.1.069.
  24. Pour-Ghaz, M., Isgor, O.B. and Ghods, P. (2009), "The effect of temperature on the corrosion of steel in concrete. Part 1: Simulated polarization resistance tests and model development", Corros. Sci., 51(2), 415-425. https://doi.org/10.1016/j.corsci.2008.10.034.
  25. Pu, Q., Yao Y., Wang, L., Shi, X., Luo, J. and Xie, Y. (2017), "The investigation of pH threshold value on the corrosion of steel reinforcement in concrete", Comput. Concrete, 19(3), 257-262. https://doi.org/10.12989/cac.2017.19.3.257.
  26. Redaelli, E., Bertolini, L., Peelen, W. and Polder, R. (2006), "FEM-models for the propagation period of chloride induced reinforcement corrosion", Mater. Corros., 57(8), 628-635. https://doi.org/10.1002/maco.200603995.
  27. Revert, A.B., Hornbostel, K., Weerdt, K.D. and Geiker, M.R. (2019), "Macro-cell corrosion in carbonated Portland and Portland-fly ash concrete-Contribution and mechanism", Cement Concrete Res., 116, 273-283. https://doi.org/10.1016/j.cemconres.2018.12.005.
  28. Tian, Y., Chen, C., Jin, N., Jin, X. Tian, Z., Yan, D. and Yu, W. (2019), "An investigation on the three-dimensional transport of chloride ions in concrete based on X-ray computed tomography technology", Constr. Build Mater., 221, 443-455. https://doi.org/10.1016/j.conbuildmat.2019.05.144.
  29. Tu, X., Li, Z., Chen, A. and Pan, Z. (2018), "A multiscale numerical simulation approach for chloride diffusion and rebar corrosion with compensation model", Comput. Concrete, 21(4), 471-484. https://doi.org/10.12989/cac.2018.21.4.471.
  30. Warkus, J. and Raupach, M. (2008), "Numerical modelling of macro-cells occurring during corrosion of steel in concrete", Mater. Corros., 59(2), 122-130. https://doi.org/10.1002/maco.200804164.
  31. Warkus, J., Brem, M. and Raupach, M. (2006), "BEM-models for the propagation period of chloride induced reinforcement corrosion", Mater. Corros., 57(8), 636-641. https://doi.org/10.1002/maco.200603995.
  32. Wong, P.T.W., Lai, W.W.L., Sham, J.F.C. and Poon, C. (2019), "Hybrid non-destructive evaluation methods for characterizing chloride-induced corrosion in concrete", Ndt&E Int., 107, 102123. https://doi.org/10.1016/j.ndteint.2019.05.008.
  33. Xia, J., Li, T., Fang, J. and Jin, W. (2019), "Numerical simulation of steel corrosion in chloride contaminated concrete", Constr. Build Mater., 228, 116745. https://doi.org/10.1016/j.conbuildmat.2019.116745.
  34. Xu, F., Xiao, Y., Wang, S., Li, W., Liu, W., and Du, D. (2018), "Numerical model for corrosion rate of steel reinforcement in cracked reinforced concrete structure", Constr. Build Mater., 180, 55-67. https://doi.org/10.1016/j.conbuildmat.2018.05.215.
  35. Yu, B., Liu, J. and Li, B. (2017), "Improved numerical model for steel reinforcement corrosion in concrete considering influences of temperature and relative humidity", Constr. Build. Mater., 142, 175-186. https://doi.org/10.1016/j.conbuildmat.2017.03.045.
  36. Yu, B., Yang, L., Wu, M. and Li, B. (2014), "Practical model for predicting corrosion rate of steel reinforcement in concrete structures", Constr. Build. Mater., 54, 385-401. https://doi.org/10.1016/j.conbuildmat.2013.12.046.
  37. Zhou, B., Gu, X., Guo, H., Zhang, W. and Huang, Q. (2018), "Polarization behavior of activated reinforcing steel bars in concrete under chloride environments", Constr. Build. Mater., 164, 877-887. https://doi.org/10.1016/j.conbuildmat.2018.01.187.