DOI QR코드

DOI QR Code

Bond strength prediction of spliced GFRP bars in concrete beams using soft computing methods

  • 투고 : 2020.01.29
  • 심사 : 2021.02.25
  • 발행 : 2021.04.25

초록

The bond between the concrete and bar is a main factor affecting the performance of the reinforced concrete (RC) members, and since the steel corrosion reduces the bond strength, studying the bond behavior of concrete and GFRP bars is quite necessary. In this research, a database including 112 concrete beam test specimens reinforced with spliced GFRP bars in the splitting failure mode has been collected and used to estimate the concrete-GFRP bar bond strength. This paper aims to accurately estimate the bond strength of spliced GFRP bars in concrete beams by applying three soft computing models including multivariate adaptive regression spline (MARS), Kriging, and M5 model tree. Since the selection of regularization parameters greatly affects the fitting of MARS, Kriging, and M5 models, the regularization parameters have been so optimized as to maximize the training data convergence coefficient. Three hybrid model coupling soft computing methods and genetic algorithm is proposed to automatically perform the trial and error process for finding appropriate modeling regularization parameters. Results have shown that proposed models have significantly increased the prediction accuracy compared to previous models. The proposed MARS, Kriging, and M5 models have improved the convergence coefficient by about 65, 63 and 49%, respectively, compared to the best previous model.

키워드

참고문헌

  1. Achillides, Z. (1998), "Bond behavior of FRP bars in concrete", Ph.D. Dissertation, Department of Civil and Structural Engineering, University of Sheffield.
  2. Achillides, Z. and Pilakoutas, K. (2004), "Bond behavior of fiber reinforced polymer bars under direct pullout conditions", J. Compos. Constr., ASCE, 8(2), 173-181. https://doi.org/10.1061/(ASCE)1090-0268(2004)8:2(173).
  3. ACI Committee 440.1R-03 (2003), Guide for the Design and Construction of Concrete Reinforced with FRP Bars, American Concrete Institute, Farmington Hills, Michigan.
  4. ACI Committee 440.1R-06 (2006), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, American Concrete Institute, Farmington Hills, Michigan.
  5. ACI Committee 440.1R-15 (2015), Guide for the Design and Construction of Structural Concrete Reinforced with FRP Bars, American Concrete Institute, Farmington Hills, Michigan.
  6. Ahmad, S., Pilakoutas, K., Rafi, M.M. and Zaman, Q.U. (2018), "Bond strength prediction of steel bars in low strength concrete by using ANN", Comput. Concrete, 22(2), 249-259. https://doi.org/10.12989/cac.2018.22.2.249.
  7. Al-Mudhafar, W.J. (2019), "Bayesian kriging for reproducing reservoir heterogeneity in a tidal depositional environment of a sandstone formation", J. Appl. Geophys., 160, 84-102. https://doi.org/10.1016/j.jappgeo.2018.11.007.
  8. Aly, R. (2005), "Experimental and analytical studies on bond behavior of tensile lap spliced FRP reinforcing bars in concrete", Ph.D. Dissertation, Department of Civil Engineering, University of Sherbrook, Sherbrook.
  9. Ashrafi, H., Bazli, M. and Vatani Oskouei, A. (2017), "Enhancement of bond characteristics of ribbed-surface GFRP bars with concrete by using carbon fiber mat anchorage", Constr. Build. Mater., 134, 507-519. https://doi.org/10.1016/j.conbuildmat.2016.12.083.
  10. Asteris, P.G., Ashrafian, A. and Rezaie-Balf, M. (2019), "Prediction of the compressive strength of self-compacting concrete using surrogate models", Comput. Concrete, 24(2), 137-150. https://doi.org/10.12989/cac.2019.24.2.137.
  11. Baena, M., Torres, L., Turon, A. and Barris, C. (2009), "Experimental study of bond behavior between concrete and FRP bars using a pull-out test", Compos. Part B, 40(8), 784-797. https://doi.org/10.1016/j.compositesb.2009.07.003.
  12. Bazli, M., Ashrafi, H. and Vatani Oskouei, A. (2017), "Experiments and probabilistic models of bond strength between GFRP bar and different types of concrete under aggressive environments", Constr. Build. Mater., 148, 429-443. https://doi.org/10.1016/j.conbuildmat.2017.05.046.
  13. Behnood, A., Olek, J. and Glinicki, M.A. (2015), "Predicting modulus elasticity of recycled aggregate concrete using M5 model tree algorithm", Constr. Build. Mater., 94, 137-147. https://doi.org/10.1016/j.conbuildmat.2015.06.055.
  14. CAN/CSA S6-14 (2014), Canadian Highway Bridge Design Code, Canadian Standards Association, Ontario, Canada.
  15. CAN/CSA S806-12 (2012), Design and Construction of Building Components with Fiber Reinforced Polymers, Canadian Standards Association, Ontario, Canada.
  16. Chaallal, O. and Benmokrane, B. (1993), "Pullout and bond of glass fibre rods embedded in concrete and cement grout", Mater. Struct., 26(3), 167-175. https://doi.org/10.1007/BF02472934.
  17. Choi, D.U., Chun, S.C. and Ha, S.S. (2012), "Bond strength of glass fiber-reinforced polymer bars in unconfined concrete", Eng. Struct., 34, 303-313. https://doi.org/10.1016/j.engstruct.2011.08.033.
  18. Choi, Y.C., Bae, B.I., Cho, K.H. and Choi, H.K. (2014), "Experimental study on the performance of tensile lap-spliced GFRP rebars in concrete beam", Mag. Concrete Res., 66(24), 1250-1262. https://doi.org/10.1680/macr.14.00111.
  19. Conoscenti, C., Rotigliano, E., Cama, M., Caraballo-Arias, N.A., Lombardo, L. and Agnesi, V. (2016), "Exploring the effect of absence selection on landslide susceptibility models: a case study in Sicily, Italy", Geomorphology, 261, 222-235. https://doi.org/10.1016/j.geomorph.2016.03.006.
  20. Ehsani, M.R., Saadatmanesh, H. and Tao, S. (1993), "Bond of GFRP rebars to ordinary-strength concrete", ACI Int. Symp. on Non-Metallic Continuous Reinforcement, Vancouver, Canada.
  21. Ehsani, M.R., Saadetmanesh, H. and Tao, S. (1996), "Design recommendation for bond of GFRP bars to concrete", J. Struct. Eng., ASCE, 122(3), 247-254. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:3(247)
  22. Esfahani, M.R., Rakhshanimehr, M. and Mousavi, S.R. (2013), "Bond strength of lap-spliced GFRP bars in concrete beams", J. Compos. Constr., ASCE, 17(3), 314-323. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000359.
  23. Faza, S.S. and GangaRao, H.V.S. (1990), "Bending and bond behaviour of concrete beams reinforced with plastic rebars", Transportation Research Record, No. 1290, 185-193.
  24. Friedman, J.H. (1991), "Multivariate adaptive regression splines", Ann. Statist., 19(1), 1-67. https://doi.org/10.1214/aos/1176347963
  25. Golafshani, E.M., Rahai, A. and Hosseini Kebria, S.S. (2014), "Prediction of the bond strength of ribbed steel bars in concrete based on genetic programming", Comput. Concrete, 14(3), 327-345. https://doi.org/10.12989/cac.2014.14.3.327 327.
  26. Golafshani, E.M., Rahai, A. and Sebt, M.H. (2015), "Artificial neural network and genetic programming for predicting the bond strength of GFRP bars in concrete", Mater. Struct., 48(5), 1581-1602. https://doi.org/10.1617/s11527-014-0256-0.
  27. Guneyisi, E.M., Mermerdas, K. and Gultekin, A. (2016), "Evaluation and modeling of ultimate bond strength of corroded reinforcement in reinforced concrete elements", Mater. Struct., 49(8), 3195-3215. https://doi.org/10.1617/s11527-015-0713-4.
  28. Hao, Q.D., Wang, B. and Ou, J.P. (2006), "Fiber reinforced polymer rebar's application to civil engineering", Concrete, 9, 38-40.
  29. Harajli, M. and Abouniaj, M. (2010), "Bond performance of GFRP bars in tension: experimental evaluation and assessment of ACI 440 guidelines", J. Compos. Constr., ASCE, 14(6), 659-668. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000139.
  30. Hossain, K.M.A., Ametrano, D. and Lachemi, M. (2017), "Bond strength of GFRP bars in ultra-high strength concrete using RILEM beam tests", J. Build. Eng., 10, 69-79. https://doi.org/10.1016/j.jobe.2017.02.005.
  31. Japan Society of Civil Engineers, JSCE (1997), Recommendation for Design and Construction of Concrete Structures Using Continuous Fiber Reinforcing Materials, Tokyo, Japan.
  32. Jekabsons, G. (2010a), "ARESLab: Adaptive Regression Splines toolbox for MATLAB/Octave", Institute of Applied Computer Systems, Riga Technical University, Latvia.
  33. Jekabsons, G. (2010b), "M5PrimeLab: M5' Regression Tree, Model Tree, and tree ensemble toolbox for MATLAB/Octave", Institute of Applied Computer Systems, Riga Technical University, Latvia.
  34. Kanakubo, T., Yonemaru, K., Fukuyama, H., Fujisawa, M. and Sonobe, Y. (1993), "Bond performance of concrete members reinforced with FRP bars", International Symposium: Fiber-Reinforced Plastic Reinforcement for Concrete Structues, SP138, ACI Proceedings, 767-788.
  35. Koroglu, M.A. (2018), "Artificial neural network for predicting the flexural bond strength of FRP bars in concrete", Sci. Eng. Compos. Mater., 26(1), 12-29. https://doi.org/10.1515/secm2017-0155.
  36. Kotynia, R., Szczech, D. and Kaszubska, M. (2017), "Bond behavior of GRFP bars to concrete in beam test", Procedia Eng., 193, 401-408. https://doi.org/10.1016/j.proeng.2017.06.230.
  37. Krige, D. (1951), "A stitistical approach to some basic mine valuation problems on the witwatersrand", J. South. Afr. Inst. Min. Metal., 52, 119-139.
  38. Lee, J.Y., Yi, C.K. and Cheong, Y.G. (2009), "Experimental study on the FRP-concrete bond behavior under repeated loadings", Mech. Compos. Mater., 45(6), 609-618. https://doi.org/10.1007/s11029-010-9117-2.
  39. Li, C. and Pan, Q. (2019), "Adaptive optimization methodology based on Kriging modeling and a trust region method" Chinese J. Aeronaut., 32(2), 281-295. https://doi.org/10.1016/j.cja.2018.11.012.
  40. Lin, H., Zhao, Y., Feng, P., Ye, H., Ozbolt, J., Jiang, C. and Yang, J.Q. (2019), "State-of-the-art review on the bond properties of corroded reinforcing steel bar", Constr. Build. Mater., 213, 216-233. https://doi.org/10.1016/j.conbuildmat.2019.04.077.
  41. Lophaven, S.N., Nielsen, H.B. and Sndergaard, J. (2002), DACEa MATLAB Kriging Toolbox, Ver. 2.0, IMM, Kongens Lyngby, Denmark.
  42. Makitani, E., Irisawa, I. and Nishiura, N. (1993), "Investigation of bond in concrete member with fibre reinforced plastic bars", Fibre-Reinforced-Plastic Reinforcement for Concrete Structures International Symposium, ACI SP138-20, 315-331.
  43. Mallipeddi, R. and Lee, M. (2015), "An evolving surrogate model-based differential evolution algorithm", Appl. Soft Comput., 34, 770-787. https://doi.org/10.1016/j.asoc.2015.06.010.
  44. Malvar, L.J. (1994), "Bond stress-slip characteristics of FRP rebars", Report TR- 2013-SHR, Naval Facilities Eng. Service Center, Port Hueneme, California.
  45. Mansouri, I., Ozbakkaloglu, T., Kisi, O. and Xie, T. (2016), "Predicting behavior of FRP-confined concrete using neuro fuzzy, neural network, multivariate adaptive regression splines and M5 model tree techniques", Mater. Struct., 49(10), 4319-4334. https://doi.org/10.1617/s11527-015-0790-4.
  46. Matheron, G. (1970), Random Functions and their Applications in Geology, Springer, Plenum, New York.
  47. Maurel, O., Dekoster, M. and Buyle-Bodin, F. (2005), "Relation between total degradation of steel concrete bond and degree of corrosion of RC beams experimental and computational studies", Comput. Concrete, 2(1), 1-18. https://doi.org/10.12989/cac.2005.2.1.001.
  48. Moodi, Y., Farahi Shahri, S. and Mousavi, S.R. (2017), "Providing a model for estimating the compressive strength of square and rectangular columns confined with a variety of fibre-reinforced polymer sheets", J. Reinf. Plast. Compos., 36(21), 1602-1612. https://doi.org/10.1177/0731684417720837.
  49. Mosley, C.P., Tureyen, A.K. and Frosch, R.J. (2008), "Bond strength of nonmetallic reinforcing bars", ACI Struct. J., 105(5), 634-642.
  50. Nanni, A., Al-Zaharani, M., Al-Dulaijan, S., Bakis, C. and Boothby, I. (1995), "Bond of FRP reinforcement to concretee-xperimental results", Non-metallic (FRP) Reinforcement for Concrete Struct., Proceedings of the Second Int. RILEM Symposium, CRC Press.
  51. Nguyen, H., Bui, X.N., Tran, Q.H. and Mai, N.L. (2019), "A new soft computing model for estimating and controlling blast-produced ground vibration based on Hierarchical K-means clustering and Cubist algorithms", Appl. Soft Comput., 77, 376-386. https://doi.org/10.1016/j.asoc.2019.01.042.
  52. Okelo, R. and Yuan, R.L. (2005), "Bond strength of fiber reinforced polymer reinforcement bars in normal strength concrete", J. Compos. Constr., ASCE, 9(3), 203-213. https://doi.org/10.1061/(ASCE)1090-0268(2005)9:3(203).
  53. Orangun, C.O., Jirsa, J.O. and Breen, J.E. (1977), "Reevaluation of test data on development length and splices", ACI J. Proc., 74(3), 114-122.
  54. Park, J.S., Lim, A.R., Kim, J. and Lee, J.Y. (2016), "Bond performance of fiber-reinforced polymer rebars in different casting positions", Polym. Compos., 37(7), 2098-2108. https://doi.org/10.1002/pc.23388.
  55. Pay, A.C., Canbay, E. and Frosch, R.J. (2014), "Bond strength of spliced fiber-reinforced polymer reinforcement", ACI Struct. J., 111(2), 257-266.
  56. Pleimann, L.G. (1987), "Tension and bond pull-out tests of deformed fibreglass rods", Final Report for Marshall-Vega Corporation, Marshall, Arkansas, Civil Engineering Department, University of Arkansas, Fayetteville, 5-11.
  57. Quinlan, J.R. (1992), "Learning with continuous classes", Proceedings of Australian Joint Conference on Artificial Intelligence, World Scientific Press, Singapore.
  58. Rakhshanimehr, M., Mousavi, S.R., Esfahani, M.R. and Farahi Shahri, S. (2018), "Establishment and experimental validation of an updated predictive equation for the development and lapspliced length of GFRP bars in concrete", Mater. Struct., 51(15). https://doi.org/10.1617/s11527-018-1137-8.
  59. Rezaei, A. (2017), "Effect of transverse reinforcement on the bond strength of spliced GFRP bars in concrete beams", Master Dissertation, University of Sistan and Baluchestan, Zahedan, Iran. (in Persian)
  60. Sacks, J., Welch, W.J., Mitchell, T.J. and Wynn, H.P. (1989), "Design and analysis of computer experiments", Stat. Sci., 4(4), 409-435. https://doi.org/10.1214/ss/1177012413
  61. Saleh, N., Ashour, A., Lam, D. and Sheehan, T. (2019), "Experimental investigation of bond behaviour of two common GFRP bar types in high-strength concrete", Constr. Build. Mater., 201, 610-622. https://doi.org/10.1016/j.conbuildmat.2018.12.175.
  62. Shirkhani, A., Davarnia, D. and Farahmand Azar, B. (2019), "Prediction of bond strength between concrete and rebar under corrosion using ANN", Comput. Concrete, 23(4), 273-279. https://doi.org/10.12989/cac.2019.23.4.273.
  63. Tepfers, R. (1982), "Tensile lap splices with confining reinforcement", Contribution to the Int. Conference on Bond in Concrete, Paisley, Scotland, 318-330.
  64. Tighiouart, B., Benmokrane, B. and Gao, D. (1998), "Investigation of bond in concrete member with fibre reinforced polymer (FRP) bars", Constr. Build. Mater., 12(8), 453-462. https://doi.org/10.1016/S0950-0618(98)00027-0.
  65. Tighiouart, B., Benmokrane, B. and Mukhopadhyaya, P. (1999), "Bond strength of glass FRP rebars splices in beams under static loading", Constr. Build. Mater., 13(7), 383-392. https://doi.org/10.1016/S0950-0618(99)00037-9.
  66. Turk, K., Caliskan, S. and Yildirim, M.S. (2005), "Influence of loading condition and reinforcement size on the concrete/reinforcement bond strength", Struct. Eng. Mech., 19(3), 337-346. https://doi.org/10.12989/sem.2005.19.3.337.
  67. Wambeke, B. and Shield, C. (2006), "Development length of glass fiber-reinforced polymer bars in concrete", ACI Struct. J., 103(1), 11-17.
  68. Wang, X. and Liu, X. (2004), "Bond strength modeling for corroded reinforcement in reinforced concrete", Struct. Eng. Mech., 17(6), 863-878. https://doi.org/10.12989/sem.2004.17.6.863.
  69. Wang, Y. and Witten, I.H. (1997), "Induction of model trees for predicting continuous classes", Proceedings of the Poster Papers of the European Conference on Machine Learning, University of Economics, Prague, Czech Republic.
  70. Williams, K.T. and Gomez, J.D. (2016), "Predicting future monthly residential energy consumption using building characteristics and climate data: a statistical learning approach", Energy Build., 128, 1-11. https://doi.org/10.1016/j.enbuild.2016.06.076.
  71. Xue, W., Zheng, Q., Yang, Y. and Fang, Z. (2014), "Bond behavior of sand-coated deformed glass fiber reinforced polymer rebars", J. Reinf. Plast. Compos., 33(10), 895-910. https://doi.org/10.1177/073168441352 0263.
  72. Yao, L., Zhang, L., Zhang, L. and Li, X. (2015), "Prediction of initiation time of corrosion in RC using meshless methods", Comput. Concrete, 16(5), 669-682. https://doi.org/10.12989/cac.2015.16.5.669.
  73. Zemour, N., Asadian, A., Ahmed, E.H., Khayat, K.H. and Benmokrane, B. (2018), "Experimental study on the bond behavior of GFRP bars in normal and self-consolidating concrete", Constr. Build. Mater., 189, 869-881. https://doi.org/10.1016/j.conbuildmat.2018.09.045.
  74. Zhou, J., Chen, X. and Chen, S. (2012), "Effect of different environments on bond strength of glass fiber-reinforced polymer and steel reinforcing bars", KSCE J. Civil Eng., 16(6), 994-1002. https://doi.org/10.1007/s12205-012-1462-3.