한국물환경학회지 (Journal of Korean Society on Water Environment)

  • 제37권1호
  • /
  • Pages.10-19
  • /
  • 2021
  • /
  • 2289-0971(pISSN)
  • /
  • 2289-098X(eISSN)
한국물환경학회 (Korean Society on Water Environment)
권호 표지
DOI QR코드

DOI QR Code

미세플라스틱 분리를 위한 미세기포 부상공정에서 개체군수지를 이용한 초기 부착 계수 및 부상특성의 평가

Evaluation of Initial Collision-Attachment Coefficient and Flotation Characteristics Using Population Balance in Microbubble Flotation Process for Microplastics Separation

  • 정흥조 (신경대학교 생명과학과) ;
  • 이재욱 (조선대학교 생명화학고분자공학과) ;
  • 곽동희 (전북대학교 바이오융합과학과)
  • Jung, Heung Joe (Department of Bio-Science, Shingyeung University) ;
  • Lee, Jae Wook (Department of Biochemical and Polymer Engineering, Chosun University) ;
  • Kwak, Dong Heui (Department of Bio-Convergence Science, Jeonbuk National University)
  • 투고 : 2020.11.26
  • 심사 : 2020.12.28
  • 발행 : 2021.01.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In the flotation process to remove microplastic (MP) particles, the attachment and separation efficiency is determined by the basic physicochemical characteristics of MP particles as well as bubbles. To evaluate the flotation characteristics of MP particles, we carried out a series of simulations using the population balance (PB) model. The initial attachment coefficient (αo) of MP particles was in the range of 0.2-0.275, and it was slightly lower than that of typical particles, such as clay, debris and algae particles, which exist in water bodies, αo, 0.3-0.4. The relative bubble number (RBN) attached to the surface of the typical number of bubbles was 0.30 and 0.32 for MP 30 ㎛ and MP 58 ㎛, respectively. In comparison, the RBN of larger MP particles (138 ㎛) was as high as 0.53. Furthermore, smaller microbubbles were required to separate properly or additional treatment needed to be applied to enhance collision and attachment efficiency since the flotation of MP particles was found to be difficult to treat as high-rate. As a result of comparing the removal rate (experimental value) of MP particles obtained from the batch-type flotation apparatus and the flotation removal rate (predicted value) of MP obtained through the PB model, the final particles by the particle size of MP overall except for the initial separation time area. With respect to the removal efficiency, the observed and predicted values were similar, and it was confirmed that the floating separation characteristics and evaluation of the MP particles through the PB model could be possible.

키워드

참고문헌

  1. Chen, A., Yang, W., Geng, S., Gao, F., He, T., Wang, Z., and Huang, Q. (2019). Modeling of microbubble flow and coalescence behavior in the contact zone of a dissolved air dlotation tank using a computational fluid dynamics? Population balance model, Industrial & Engineering Chemistry Research, 58(36), 16989-17000. https://doi.org/10.1021/acs.iecr.9b03604
  2. Clift, R., Grace, J. R., and Weber, M. E. (1978). Bubbles, drops, and particles, Academic Press, New York.
  3. Coppock, R. L., Cole, M., Lindeque, P. K., Queiros, A. M., and Galloway, T. S. (2017). A small-scale, portable method for extracting microplastics from marine sediments, Environmental Pollution, 230, 829-837. https://doi.org/10.1016/j.envpol.2017.07.017
  4. Dockko, S., Kwak, D. H., and Kim, Y. H. (2004). Analysis of controlling the size of microbubble in DAF, Journal of Korean Society of Water and Wastewater, 18(2), 235-241. [Korean Literature]
  5. Edzwald, J. K. (1995). Principles and applications of dissolved air flotation, Water Science and Technology, 31(3-4), 1-23. https://doi.org/10.1016/0273-1223(95)00200-7
  6. Edzwald, J. K. (2007). Developments of high rate dissolved air flotation for drinking water treatment, Journal of Water Supply: Research and Technology-Aqua, 56(6-7), 399-409. https://doi.org/10.2166/aqua.2007.013
  7. Edzwald, K. (2010). Dissolved air flotation and me, Water Research, 44(7), 2077-2106. https://doi.org/10.1016/j.watres.2009.12.040
  8. Eerkes-Medrano, D., Thompson, R. C., and Aldridge, D. C. (2015). Microplastics in freshwater systems: A review of the emerging threats, identification of knowledge gaps and prioritisation of research needs, Water Research, 75, 63-82. https://doi.org/10.1016/j.watres.2015.02.012
  9. Efimova, I., Bagaeva, M., Bagaev, A., Kileso, A., and Chubarenko, I. P. (2018). Secondary microplastics generation in the sea swash zone with coarse bottom sediments: Laboratory experiments, Frontiers in Marine Science, 5, 313. https://doi.org/10.3389/fmars.2018.00313
  10. Frias, J. P. G. L., Lyashevska, O., Joyce, H., Pagter, E., and Nash, R. (2020). Floating microplastics in a coastal embayment: A multifaceted issue, Marine Pollution Bulletin, 158, 111361. https://doi.org/10.1016/j.marpolbul.2020.111361
  11. Fukushi, K., Tambo, N., and Matsui, Y. (1995). A kinetic model for dissolved air flotation in water and wastewater treatment, Water Science and Technology, 31(3-4), 37-47. https://doi.org/10.1016/0273-1223(95)00202-X
  12. Haarhoff, J. and Edzwald, J. K. (2004). Dissolved air flotation modelling: Insights and shortcomings, Journal of Water Supply Research and Technology-aqua, 53(3), 127-150. https://doi.org/10.2166/aqua.2004.0012
  13. Han, M., Park, Y. H., Kwak, D. H., and Jeon, K. H. (2001). Effect of particle and bubble size on the removal efficiency in DAF, Journal Korean Society of Water and Wastewater, 15(3), 197-202. [Korean Literature]
  14. Hyde, R. A., Miller, D. G., Packham, R. F., and Richards, W. N. (1977). Water clarification by flotation, Journal of American Water Works Association, 69(7), 369-374. https://doi.org/10.1002/j.1551-8833.1977.tb06768.x
  15. Imhof, H. K., Schmid, J., Niessner, R., Ivleva, N. P., and Laforsch, C. (2012). A novel, highly efficient method for the separation and quantification of plastic particles in sediments of aquatic environments, Limnology and Oceanography Methdods, 10, 524-537. https://doi.org/10.4319/lom.2012.10.524
  16. Jung, H. J., Lee, J. W., Choi, D. Y., Kim, S. J., and Kwak, D. H. (2006). Flotation efficiency of activated sludge flocs using population balance model in dissolved air flotation, Korean Chemical Engineering Research, 23(2), 271-278. https://doi.org/10.1007/BF02705726
  17. Kwak, D. H., Jung, H. J., Kim, S. J., Won, C. H., and Lee, J. W. (2005). Separation characteristics of inorganic particles from rainfalls in dissolved air flotation: A Korean perspective, Separation Science and Technology, 40, 3001-3015. https://doi.org/10.1080/01496390500338144
  18. Kwak, D. H., Jung, H. J., Kwon, S. B., Lee, E. J., Won, C. H., Lee, J. W., and Yoo, S. J. (2009). Rise velocity verification of bubble-floc agglomerates using population balance in the DAF process, Journal of Water Supply: Research and Technology-AQUA, 58(2), 85-94. https://doi.org/10.2166/aqua.2009.021
  19. Leppinen, D. M. and Dalziel, S. B. (2004). Bubble size distribution in dissolved air flotation tanks, Journal of Water Supply: Research and Technology-Aqua, 53(8), 531-543. https://doi.org/10.2166/aqua.2004.0042
  20. Leppinen, D. M., Dalziel, S. B., and Linden, P. F. (2001). Modeling the global efficiency of dissolved air flotation, Water Science and Technology, 43(8), 159. https://doi.org/10.2166/wst.2001.0490
  21. Liers, S., Baeyens, J., and Mochtar, I. (1996). Modeling dissolved air flotation, Water Environmental Research, 68(6), 1061. https://doi.org/10.2175/106143096X128063
  22. Majewsky, M. Bitter, H., Eiche, E., and Horn, H. (2016). Determination of microplastic polyethylene (PE) and polypropylene (PP) in environmental samples using thermal analysis (TGA-DSC), Science of The Total Environment, 568, 507-511. https://doi.org/10.1016/j.scitotenv.2016.06.017
  23. Martin, J., Lusher, A., Thompson, R. C., and Morley, T. (2017). The deposition and accumulation of microplastics in marine sediments and bottom water from the Irish continental shelf, Scientific Reports, 7, 10772. https://doi.org/10.1038/s41598-017-11079-2
  24. Mateos-Cardenas, A., O'Halloran, J., van Pelt, F. N. A. M., and Jansen, M. A. K. (2020). Rapid fragmentation of microplastics by the freshwater amphipod Gammarus duebeni (Lillj.), Scientific Reports, 10(1), 1-12. https://doi.org/10.1038/s41598-019-56847-4
  25. Miller, M., Kroon, F., and Motti, C. (2017). Recovering microplastics from marine samples: A review of current practices, Marine Pollution Bulletin, 123, 6-18. https://doi.org/10.1016/j.marpolbul.2017.08.058
  26. Moore, C. J. (2008). Synthetic polymers in the marine environment: A rapidly increasing, long-term threat, Environmental Research, 108(2), 131-139. https://doi.org/10.1016/j.envres.2008.07.025
  27. Padervand, M., Lichtfouse, E., Robert, D., and Wang, C. (2020). Removal of microplastics from the environment. A review, Environmental Chemistry Letters, 18(3), 807-828. https://doi.org/10.1007/s10311-020-00983-1
  28. Piehl, S., Leibner, A., Loder, M. G. J., Dris, R., Bogner, C., and Laforsch, C. (2018). Identification and quantification of macro and microplastics on an agricultural farmland, Scientific Reports, 8(1), 17950. https://doi.org/10.1038/s41598-018-36172-y
  29. Reid, R. C., Prausnitz, J. M., and Poling, B. E. (1987). The properties of gases and liquids, 4th ed, McGraw-Hill.
  30. Rice, E. W., Baird, R. B., and Eaton, A. D. (2017). Standard methods for the examination of water and wastewater, 23rd edition, Washington, D.C., American Public Health Association, American Water Works Association, Water Environment Federation.
  31. Rodrigues, P., Batista, J. N. M., and Bettega, R. (2019). Application of population balance equations and interaction models in CFD simulation of the bubble distribution in dissolved air flotation, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 577, 723-732. https://doi.org/10.1016/j.colsurfa.2019.06.032
  32. Rummel, C. D., Escher, B. I., Sandblom, O., Plassmann, M. M., Arp, H. P. H., MacLeod, M., and Jahnke, A. (2019). Effects of leachates from UV-weathered microplastic in cell-based bioassays, Environmental Science & Technology, 53(15), 9214-9223. https://doi.org/10.1021/acs.est.9b02400
  33. Shawwa, A. R. and Smith, D. W. (2011). Dissolved air flotation model for drinking water treatment, Canadian Journal of Civil Engineering, 27(2), 373-382 https://doi.org/10.1139/cjce-27-2-373
  34. Song, Y. K., Hong, S., Jang, M., Han, G., Jung, S. W., and Shim, W. (2017). Combined effects of UV exposure duration and mechanical abrasion on microplastic fragmentation by polymer type, Environmental Science & Technology, 51(8), 4368-4376. https://doi.org/10.1021/acs.est.6b06155
  35. Tambo, N. and Fukushi, K. (1985). A kinetic study of dissolved air flotation, Journal of JWWA, 606, 22-30.
  36. Vrablik, E. R. (1959). Fundamental principles of dissolved air flotation of industrial wastes, Industrial Waste Conference Proceedings, 14th, Purdue University, Ann Arbor, USA, 743-779.
  37. Yurtsever, M. and Celik, I. (2017). Precipitation/flotation effect of coagulant to microplastics in water, Baztan, J., Jorgensen, B., Pahl, S., Thompson, R. C., Vanderlinden, J. P. (eds.), Fate and Impact of Microplastics in Marine Ecosystems, Elsevier, 163-164.
  38. Zhang, M., Yang, J., Kang, Z., Wu, X., Tang, L., Qiang, Z., Zhang, D., and Pan, X. (2021). Removal of micron-scale microplastic particles from different waters with efficient tool of surface-functionalized microbubbles, Journal of Hazardous Materials, 404, 124095. https://doi.org/10.1016/j.jhazmat.2020.124095