DOI QR코드

DOI QR Code

Further study on improvement on strain concentration in through-diaphragm connection

  • Qin, Ying (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Zhang, Jingchen (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Shi, Peng (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Chen, Yifu (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Xu, Yaohan (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University) ;
  • Shi, Zuozheng (Key Laboratory of Concrete and Prestressed Concrete Structures of Ministry of Education, School of Civil Engineering, Southeast University)
  • 투고 : 2020.10.13
  • 심사 : 2021.03.26
  • 발행 : 2021.04.25

초록

Hollow structural section (HSS) columns have been increasingly popular due to their structural and architectural merits. However, practical difficulty lies in developing proper connections. The through-diaphragm connections are considered as suitable connection type that is widely adopted in Asian countries. However, the stress concentration occurs at the location connecting through-diaphragm and steel beam. Furthermore, the actual load path from the beam flange is not uniformly transferred to the HSS column as conventionally assumed. In this paper, tensile tests were further conducted on three additional specimens with beam flange plate to evaluate the load versus displacement response. The load-displacement curves, yield and ultimate capacity, ductility ratio were obtained. Furthermore, the strain development at different loading levels was discussed comprehensively. It is shown that the studied connection configuration significantly reduces the stress concentration. Meanwhile, simplified trilinear load-displacement analytical model for specimen under tensile load was presented. Good agreement was found between the theoretical and experimental results.

키워드

참고문헌

  1. Agheshlui, H., Goldsworthy, H., Gad, E. and Mirza, O. (2017), "Anchored blind bolted composite connection to a concrete filled steel tubular column", Steel Compos. Struct., 23(1), 115-130. https://doi.org/10.12989/scs.2017.23.1.115.
  2. Ahmadi, M.M. and Mirghaderi, S.R. (2019), "Experimental studies on through-plate moment connection for beam to HSS/CFT column", J. Constr. Steel Res., 161, 154-170. https://doi.org/10.1016/j.jcsr.2019.06.010.
  3. AIJ-2002 (2002), AIJ Standard for Design of Steel Structures. Architectural Institute of Japan, Japan.
  4. ANSI/AISC 341-16 (2016), Seismic provisions for structural steel buildings. Chicago (IL): American Institute of Steel Construction, Inc.; 2016.
  5. AlHendi, H. and Celikag, M. (2015), "Behavior of reverse-channel and double-reverse-channel connections to tubular columns with HSS", J. Constr. Steel Res., 112, 271-281. https://doi.org/10.1016/j.jcsr.2015.05.017.
  6. Al-Rifaie, A.A., Jones, S.W., Wang, Q.Y. and Guan, Z.W. (2018), "Experimental and numerical study on lateral impact response of concrete filled steel tube columns with end plate connections", Int. J. Impact Eng., 121, 20-34. https://doi.org/10.1016/j.ijimpeng.2018.07.003.
  7. Barkhori, M., Maleki, S., Mirtaheri, M., Nazeryan, M. and Kolbadi, S.M.S. (2020), "Investigation of shear lag effect on tension members fillet-welded connections consisting of single and double channel sections", Struct. Eng. Mech., 74(3), 445-455. https://doi.org/10.12989/sem.2020.74.3.445.
  8. Chou, C.C. and Jao, C.K. (2010), "Seismic rehabilitation of welded steel beam-to-box column connections utilizing internal flange stiffeners", Earthq. Spectra., 26(4), 927-950. https://doi.org/10.1193/1.3480275.
  9. Chung, J.N., Seo, S., Matsui, C. and Choi, S. (2005), "Hysteresis behavior of square tube columns to H-beam connections with vertical stiffeners", Adv. Struct. Eng., 8(6), 561-572. https://doi.org/10.1260/136943305776318383.
  10. Dehghan, S.M., Najafgholipour, M.A., Ziarati, S.M. and Meprpour, M.R. (2018), "Experimental and numerical assessment of beam-column connection in steel moment-resisting frames with built-up double-I column", Steel Compos. Struct., 26(3), 315-328. https://doi.org/10.12989/scs.2018.26.3.315.
  11. De Nardin, S. and El Debs, A.L.H.C. (2018), "Shear transfer mechanism in connections involving concrete filled steel columns under shear forces", Steel Compos. Struct., 28(4), 449-460. https://doi.org/10.12989/scs.2018.28.4.449.
  12. Ebrahimi, S., Zahrai, S.M. and Mirghaderi, S.R. (2019), "Numerical study on force transfer mechanism in through gusset plates of SCBFs with HSS columns & beams", Steel Compos. Struct., 31(6), 541-558. https://doi.org/10.12989/scs.2019.31.6.541.
  13. Eslami, M., Namba, H., Kodu, V., Mahamid, M. and Morovat, M.A. (2019), "Seismic behavior of composite beam connected to HSS column with large width-to-thickness ratio", Eng. Struct., 183, 423-442. https://doi.org/10.1016/j.engstruct.2018.12.084.
  14. Gholami, M., Deylami, A. and Tehranizadeh, M. (2013), "Seismic performance of flange plate connections between steel beams and box columns", J. Constr. Steel Res., 84, 36-48. https://doi.org/10.1016/j.jcsr.2012.11.011.
  15. Goswami, R. and Murty, C.V.R. (2010), "Externally reinforced welded I-beam-to-box-column seismic connection", J. Eng. Mech., 136(1), 23-30. https://doi.org/10.1061/(ASCE)0733-9399(2010)136:1(23).
  16. Hassan, M.M., Ramadan, H., Abdel-Mooty, M. and Mourad, S.A. (2015), "Experimental and numerical study of one-sided branch plate-to-circular hollow section connections", Steel Compos. Struct., 19(4), 877-895. https://doi.org/10.12989/scs.2015.19.4.877.
  17. Jamalpour, R., Nekooei, M. and Moghadam, A.S. (2017), "Seismic behavior of steel column-base-connection equipped by NiTi shape memory alloy", Struct. Eng. Mech., 64(1), 109-120. https://doi.org/10.12989/sem.2017.64.1.109.
  18. Kian, A.R.T. and Deylami, A. (2019), "Rib-reinforced moment connection of steel beam to box column", Proc. Inst. Civil Eng.-Struct. Build., 172(6), 407-421. https://doi.org/10.1680/jstbu.17.00125.
  19. Kim, S.H. and Choi, S.M. (2017), "Tensile strength and concrete cone failure in CFT connection with internal diaphragms", Int. J. Steel Struct., 17(2), 643-652. https://doi.org/10.1007/s13296-017-6021-9.
  20. Kim, T., Stojadinovic, B. and Whittaker, A.S. (2008). "Seismic performance of pre-Northridge welded steel moment connections to built-up box columns", J. Struct. Eng., 134(2), 289-299. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:2(289).
  21. Kovesdi, B. and Somodi, B. (2018), "Comparison of safety factor evaluation methods for flexural buckling of hss welded box section columns", Struct., 15, 43-55. https://doi.org/10.1016/j.istruc.2018.05.006.
  22. Lopez-Colina, C., Serrano, M.A., Lozano, M., Gayarre, F.L., Suarez, J.M. and Wilkinson, T. (2019), "Characterization of the main component of equal width welded I-beam-to-RHS-column connections", Steel Compos. Struct., 32(3), 337-346. https://doi.org/10.12989/scs.2019.32.3.337.
  23. Lor, H.A., Izadinia, M. and Memarzadeh, P. (2019), "Experimental evaluation of steel connections with horizontal slit dampers", Steel Compos. Struct., 32(1), 79-90. https://doi.org/10.12989/scs.2019.32.1.079.
  24. Lu, C.H., Ma, X. and Mills, J.E. (2014), "The structural effect of bolted splices on retrofitted transmission tower angle members", J. Constr. Steel Res., 95, 263-278. https://doi.org/10.1016/j.jcsr.2013.12.011.
  25. Lu, C.H., Ma, X. and Mills, J.E. (2018), "Cyclic performance of bolted cruciform and splice connectors in retrofitted transmission tower legs", Thin Wall. Struct., 122, 264-285. https://doi.org/10.1016/j.tws.2017.10.020.
  26. Mirghaderi, S.R., Torabian, S. and Keshavarzi, F. (2010), "I-beam to box-column connection by a vertical plate passing through the column", Eng. Struct., 32(8), 2034-2048. https://doi.org/10.1016/j.engstruct.2010.03.002.
  27. Mirtaheri, M., Emami, F., Zoghi, M.A. and Salkhordeh, M. (2019), "Mitigation of progressive collapse in steel structures using a new passive connection", Struct. Eng. Mech., 70(4), 381-394. https://doi.org/10.12989/sem.2019.70.4.381.
  28. Nunez, E., Torres, R. and Herrera, R. (2017), "Seismic performance of moment connections in steel moment frames with HSS columns", Steel Compos. Struct., 25(3), 271-286. https://doi.org/10.12989/scs.2017.25.3.271.
  29. Pan, J.R., Chen, S.Z., Lai, Z.C., Wang, Z. and Wang, J.Q. (2017), "Analysis and fracture behavior of welded box beam-to-column connections considering residual stresses", Constr. Build. Mater., 154, 557-566. https://doi.org/10.1016/j.conbuildmat.2017.07.228.
  30. Qin, Y., Chen, Z.H., Bai, J.J. and Li, Z.L. (2016), "Test of extended thick-walled through-diaphragm connection to thick-walled CFT column", Steel Compos. Struct., 20(1), 1-20. http://dx.doi.org/10.12989/scs.2016.20.1.001.
  31. Qin, Y., Zhang, J.C., Shi, P., Chen, Y.F., Xu, Y.H. and Shi, Z.Z. (2018), "Behavior of improved through-diaphragm connection to square tubular column under tensile loading", Struct. Eng. Mech., 68(4), 475-483. https://doi.org/10.12989/sem.2018.68.4.475.
  32. Reyes-Salazar, A., Ruiz, S.E., Bojorquez, E. and Bojorquez, J. (2016), "Seismic response of complex 3D steel buildings with welded and post-tensioned connections", Earthq. Struct., 11(2), 217-243. https://doi.org/10.12989/eas.2016.11.2.217.
  33. Rezaifar, O., Nazari, M. and Gholhaki, M. (2017), "Experimental study of rigid beam-to-box column connections with types of internal/external stiffeners", Steel Compos. Struct., 25(5), 535-544. https://doi.org/10.12989/scs.2017.25.5.535.
  34. Rong, B., Liu, S., Yan, J.B. and Zhang, R.Y. (2018a), "Shear behaviour of panel zone in through-diaphragm connections to steel tubular columns", Thin Wall. Struct., 122, 286-299. https://doi.org/10.1016/j.tws.2017.10.029.
  35. Rong, B., You, G.C., Zhang, R.Y., Ma, X. and Quan, X.X. (2018b), "Experimental and theoretical studies on SHS column connection with external stiffening ring under static tension load", Steel Compos. Struct., 28(2), 167-177. https://doi.org/10.12989/scs.2018.28.2.167.
  36. Roudsari, M.T., Sohaei, S., Torkaman, M., Safaee, S.A., Tahmasebi, S., Mohammadi, S. and Ghiasvand, M.M. (2020), "Presenting a new detail for the rigid connection between i-shaped beam and concrete-filled steel tube column with stiffened channel link", Int. J. Steel Struct., 20(2), 655-667. https://doi.org/10.1007/s13296-020-00312-w.
  37. Shahri, S.F. and Mousavi, S.R. (2018), "Seismic behavior of beam-to-column connections with elliptic slit dampers", Steel Compos. Struct., 26(3), 289-301. https://doi.org/10.12989/scs.2018.26.3.289.
  38. Thornton, W.A. (2017), "Yield line approaches for design of end plate tension connections for square and rectangular HSS members using end plate tensile strength", Eng. J., AISC, 54(3), 141-154.
  39. T/CECS 506-2018 (2018), Technical Specification for Connection in CFRT structure, China Planning Press, Beijing, China.
  40. Wang, J., Uy, B., Li, D.X. and Song, Y.C. (2020), "Progressive collapse analysis of stainless steel composite frames with beam-to-column endplate connections", Steel Compos. Struct., 36(4), 427-446. https://doi.org/10.12989/scs.2020.36.4.427.
  41. Wang, Z.Y., Yang, X.S., Wang, Q.Y. and Liu, Y.J. (2017), "Development of mathematical model for cyclic behaviour of blind bolted HSS column components", Arch. Civ. Mech. Eng., 17(4), 943-953. https://doi.org/10.1016/j.acme.2017.03.009.
  42. Zhang, W., Chen, Z.H., Xiong, Q.Q., Zhou, T., Rong, X. and Du, Y.S. (2018), "Experimental seismic behaviour of L-CFST column to H-beam connections", Steel Compos. Struct., 26(6), 793-808. https://doi.org/10.12989/scs.2018.26.6.793.