Journal of Ocean Engineering and Technology (한국해양공학회지)

Korean Society of Ocean Engineers (한국해양공학회)
권호 표지
DOI QR코드

DOI QR Code

Current Measurement and Velocity Spatial Distribution of Deep Ocean Engineering Basin

  • Jung, Sung-Jun (Korea Research Institute of Ships and Ocean Engineering) ;
  • Jung, Jae-Sang (Korea Research Institute of Ships and Ocean Engineering) ;
  • Lee, Yong-Guk (Korea Research Institute of Ships and Ocean Engineering) ;
  • Park, Byeong-Won (Korea Research Institute of Ships and Ocean Engineering) ;
  • Hwang, Sung-Chul (Korea Research Institute of Ships and Ocean Engineering) ;
  • Park, In-Bo (Korea Research Institute of Ships and Ocean Engineering) ;
  • Kim, Jin-Ha (Korea Research Institute of Ships and Ocean Engineering) ;
  • Park, Il-Ryong (Department of Naval Architecture & Ocean Engineering, Dongeu University)
  • Received : 2020.09.11
  • Accepted : 2021.02.04
  • Published : 2021.04.30
Download PDF
⟨ Previous Next ⟩

Abstract

To ensure the international competitiveness of the domestic offshore plant industry, a consensus has been formed regarding the requirement for large offshore basins for performing offshore plant performance verification. Accordingly, the Korea Research Institute of Ships & Ocean Engineering has built the world's largest deep ocean engineering basin (DOEB). The purpose of this study is to evaluate the characteristics of velocity distribution under various conditions of the DOEB. An independent measuring jig is designed and manufactured to measure the current velocities of many locations within a short time. The measurement jig is a 15-m-high triangular-truss structure, and the measurement sensors can move 15 m vertically through an electric motor-wire device. The current speed is measured under various impeller revolutions per minute and locations of the DOEB using the jig. The spatial distribution characteristics of the current velocity in the DOEB and the performance of the current generator are analyzed. The maximum speed is 0.56 m/s in the center of the DOEB water surface, thereby confirming sufficient current velocity distribution uniformity for model testing.

Keywords

References

  1. Buchner, B., Wichers, J.E.W., & Wilde, J. J. (1999). Features of the State-of-the-art Deepwater Offshore Basin. Offshore Technology Conference, Houston, 363-373. https://doi.org/10.4043/10814-MS
  2. Buchner, B., Cozijn, H., van Dijk, R., & Wichers, J.( 2001). Important Environmental Modelling Aspects for Ultra Deep Water Model Tests. Proceedigs of Deep Offshore Technology Conference (DOT), Rio de Janeiro.
  3. Buchner, B., & de Wilde, J. (2008). Current Modeling Experience in an Offshore Basing. Proceedings of the ASME 27th International Conference on Offshore Mechanics and Arctic Engineering (OMAE2008), Estoril, Portugal, 417-424. https://doi.org/10.1115/OMAE2008-57597
  4. Haro, M.P.E., Hwang, S.C., Nam, B.W., Cho, S.K., & Sung, H.G. (2018). Numerical Simulations for Current Generation of Constant and Variable Velocity Profiles in Deepwater Ocean Engineering Basin of KRISO. Proceedings of the 13th (2018) ISOPE Pacific/Asia Offshore Mechanics Symposium. International Society of Offshore and Polar Engineers, Jeju, Korea, 146-154.
  5. Oh, S.H., & Lee, D.S. (2018). Two-Dimensional Wave Flume with Water Circulating System for Controlling Water Level. Journal of Korean Society of Coastal and Ocean Engineers, 30(6), 337-342. https://doi.org/10.9765/KSCOE.2018.30.6.337
  6. Park, I.R., Kim, J.H., Hong, S.W., & Sung, H.G. (2014). Numerical Investigation of Current Generation Performance in a Large Ocean Engineering Basin (Oral Presentation). Proceedings of the Eleventh Pacific-Asia Offshore Mechanics Symposium PACOMS2014, Shanghai, China.
  7. Yang, C.K., Choi, H.S., & Hong, S.W. (2000). An Experimental Study on the Characteristics of Current in the Ocean Engineering Basin. Journal of the Society of Naval Architects of Korea, 37(4), 55-65.