References
- "Diesel-Engine Management 2nd Edition", Robert Bosch GmbH, 1999.
- D. S. Han, B. H. Lee, M. J. Bae, Y. J. Chang, C. H. Jeon and J. H. Song, "A Numerical Study on the Spray Characteristics of a Marine Diesel Engine of Injection Spray Angle and Hole Diameter", Spring Conference of KSME, 2008, pp. 572-577.
- S. W. Park and R. D. Reitz, "A gas jet superposition model for CFD modeling of group-hole nozzle sprays", International Journal of Heat and Fluid Flow, Vol. 30, 2009, pp. 1193-1201. https://doi.org/10.1016/j.ijheatfluidflow.2009.06.002
- S. H. Min and H. K. Suh, "The Effect of Nozzle Hole Geometry on the Small CI Engine Performances", International Conference on Advanced Automotive Technology, 2016, pp. 322.
- S. W. Han, K. H. Kim, and C. S. Bae, "Effects of Operating Parameters on Combustion Mode Transition between Low Temperature Diesel Combustion and Conventional Combustion", Spring Conference of KSAE, 2013, pp. 120-127.
- C. D. Yao, J. T. Hu, P. L. Geng, J. J. Shi, D. F. Zhang, and Y. S. Ju, "Effects of injection pressure on ignition and combustion characteristics of diesel in a premixed methanol/air mixture atmosphere in a constant volume combustion chamber", Journal of Fuel, Vol 206, 2017, pp. 593-602. https://doi.org/10.1016/j.fuel.2017.06.058
- S. H. Park, H. J. Kim, and C. S. Lee, "Comparison of experimental and predicted atomization characteristics of high-pressure diesel spray under various fuel and ambient temperature", Journal of Mechanical Science and Technology, Vol. 24, No. 7, 2010, pp. 1491-1499. https://doi.org/10.1007/s12206-010-0417-1
- D. H. Shin and S. H. Park, "Combustion and Exhaust Emission Characteristics by the Change on Intake Air Temperature in a Single Cylinder Diesel Engine", Transactions of KSAE, Vol. 25, No. 3, 2017, pp. 336-343. https://doi.org/10.7467/KSAE.2017.25.3.336
- S. K. Kumar and R. T. K. Raj, "Effect of Fuel Injection Timing and Elevated Intake Air Temperature on the Combustion and Emission Characteristics of Dual Fuel operated Diesel Engine", Journal of Procedia Engineering, Vol.64, 2013, pp. 1191-1198. https://doi.org/10.1016/j.proeng.2013.09.198
- W. Pan, C. D. Yao, G. P. Han, H. Y. Wei, and Q. G. Wang, "The impact of intake air temperature on performance and exhaust emissions of a diesel methanol dual fuel engine", Journal of Fuel, Vol. 162, 2015, 101-110. https://doi.org/10.1016/j.fuel.2015.08.073
- S. H. Min and H. K. Suh, "Fuel droplet behavior in a cylinder under the difference CO2 mole fraction conditions controlled by simulated-EGR in CI engine", International Journal of Automotive Technology, Article in Press.
- W. Bosch, The Fuel Rate Indicator : A New Measuring Instrument for Display of the Characteristics of Individual Injection, SAE 660749, 1966.
- AVL GmbH, Fire Version 2013 Combustion Module Manual, 2013.
- AVL GmbH, Fire Version 2013.2 Spray Module Manual, 2013.
- S. H. Min, H. K. Suh, S. I. Jo, and S. H. Park, "Effect of Cryogenic Intake Air Temperature on the In-Cylinder Temperature and Formation of Exhaust Emissions in a Compression Ignition Engine", Journal of Engineering for Gas Turbines and Power, Vol. 141. No. 091022, pp. 1-8, 2019.
- S. S. Lee and R. D. Reitz, "Spray Targeting to Minimize Soot and CO Formation in Premixed Charge Compression Ignition (PCCI) Combustion with a HSDI Diesel Engine", Journal of SAE, 2006-01-0918, 2006.