반도체디스플레이기술학회지 (Journal of the Semiconductor & Display Technology)

한국반도체디스플레이기술학회 (The Korean Society Of Semiconductor & Display Technology)
권호 표지

반도체·디스플레이 장비용 바닥 환경진동허용규제치의 실험적 평가방법 고찰

A Review of Experimental Evaluation Method to Floor Environment Vibration Criteria for Semiconductor and Display Equipment

  • 안채헌 (한국기술교육대학교 메카트로닉스공학부) ;
  • 최정희 (한국기술교육대학교 대학원 메카트로닉스공학과) ;
  • 박준순 (한국기술교육대학교 대학원 메카트로닉스공학과) ;
  • 박민수 (한국기술교육대학교 대학원 메카트로닉스공학과)
  • An, Chae Hun (School of Mechatronics Engineering, KOREATECH) ;
  • Choi, Jeong Hee (Department of Mechatronics Engineering, Graduate School, KOREATECH) ;
  • Park, Joon Soon (Department of Mechatronics Engineering, Graduate School, KOREATECH) ;
  • Park, Min Su (Department of Mechatronics Engineering, Graduate School, KOREATECH)
  • 투고 : 2021.02.05
  • 심사 : 2021.03.15
  • 발행 : 2021.03.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

The semiconductor and display equipment demands an ultra-fine precision of several nm to several ㎛, and the scale is getting smaller due to the explosive development. The manufacturing process equipment for such products with ultra-fine precision is very sensitive to ultra-small vibrations flowing from the floor, resulting in problems of production defects and yield degradation. The vibration criteria are a standard that regulates the vibration environment of the floor where such precision process equipment will be installed. The BBN vibration criteria defined the allowable vibration velocity level in the frequency domain with a flat and inclined line and presented a rating according to it. However, the actual vibration criteria have appeared with various magnitudes in the frequency domain according to the dynamic characteristics of individual equipment. In this study, the relationship between the relative motion of two major points in the equipment and the vibration magnitude of the floor is presented using the frequency response function of a simple 3-DOF model. It is describing the magnitudes according to the frequency of the floor vibration that guarantees the allowable relative motion and this can be used as the vibration criteria. In order to obtain the vibration criteria experimentally a method of extracting through a modal test was introduced and verified analytically. It provides vulnerable frequency and magnitude to floor vibration in consideration of the dynamic characteristics of individual equipment. And it is possible to know necessary to improve the dynamic characteristics of the equipment, and it can be used to check the vibration compatibility of the place where the equipment will be installed.

키워드

참고문헌

  1. Eric E. Ungar, "Vibration Control Design of High technology Facilities", Sound and Vibration, Vol. 24, pp. 20-27, 1990.
  2. Colin G. Gordon, "Generic Criteria for VibrationSensitive Equipment", Proceedings of International Society for Optical Engineering (SPIE), Vol. 1619, pp. 71-85, 1991.
  3. Bjarni Bessason, Charistian Madshus, Hans Arne FrOystein, and Henning KolbjOrnsen, Measurement Science and Technology, Vol. 10, pp. 1009-1014, 1999. https://doi.org/10.1088/0957-0233/10/11/306
  4. Kelly A. Salyards, and Robert J. Firman III, "Review Generic and Manufacturer Design Criteria for Vibration-Sensitive Equipment", Proceedings of IMAC-XXVII, Vol. 1, pp. 71-85, 2009.
  5. Hong-Ki Lee, Hae-Dong Park, Doo-Hoon Kim, and Sa-Soo Kim, "A Study on the Determination of Vibration Criteria for Vibration Sensitive Equipments using Impact Test", Transactions of the Korean Society for Noise and Vibration Engineering, Vol. 7, pp. 247-254, 1997.
  6. Chae-Hun An, Kyu-Chul Jung, and Gyu-Seop Lee, "An Experimental Evaluation Method for the Vibration Criteria of Semi-Conductors and Display Equipment", 15th Asia Pacific Vibration Conference, 2013.
  7. A. Pavic, P. Raynolds, P. Waldron, and K. J. Bennett, "Critical review of guidelines for checking vibration serviceability of post-tensioned concrete floors", Cement & Concrete Composites, Vol. 23, pp. 21-31, 2001. https://doi.org/10.1016/S0958-9465(00)00069-X
  8. J.M.W. Brownjohn, and C.J. Middleton, "Procedures for vibration serviceability assessment of high-freque-ncy floors", Engineering Structures, Vol. 30, pp. 1548-1559, 2007. https://doi.org/10.1016/j.engstruct.2007.10.006
  9. Mirko Friehe, Christoph Heinemeyer, and Markus Feldmann, "Design of highly sensitive floors for human induced vibrations", X International Conference on Structural Dynamics, pp. 2796-2801, 2017.
  10. Vladimir Smirnov, and Vladimir Mondrus, "Comparison of linear and nonlinear vibration isolation system under random excitation", Procedia Engineering, Vol. 153, pp. 673-678, 2016. https://doi.org/10.1016/j.proeng.2016.08.221
  11. M.J. Hudson, and P. Reynolds, "Implementation considerations for active vibration control in the design of floor structures", Engineering Structures, Vol. 44, pp. 334-358, 2012. https://doi.org/10.1016/j.engstruct.2012.05.034
  12. Min-Jung Lee, Sang-Wook Nam, and Sang-Whan Han, "Probability Based Determination of Slab Thickness Satisfying Floor Vibration Criteria", Journal of the Korea Concrete Institute, Vol. 17, pp. 687-694, 2005. https://doi.org/10.4334/JKCI.2005.17.5.687
  13. Arya Ebrahimpour, and Ronald L. Sack, "A review of vibration serviceability criteria for floor structures", Computers and Structures, Vol. 8, pp. 2488-2494, 2005.
  14. Ehsan Ahmadi, Colin Caprani, Stana Zivanovic, and Amin Heidarpour, "Vertical ground reaction forces on rigid and vibrating surface for vibration serviceability assessment of structures", Engineering Structures, Vol. 172, pp. 723-738, 2018. https://doi.org/10.1016/j.engstruct.2018.06.059
  15. Michiel A. Beijen, Marcel F. Heertjes, Hans Butler, and Maarten Steinbuch, "Disturbance feedforward control for active vibration isolation systems with internal isolator dynamics", Journal of Sound and Vibration, No. 436, pp 220-235, 2018.
  16. Yun-Ho Shin, Seok-Jun Moon, Yong-Ju Kim, and Ki-Yong Oh, "Vibration Control of Scanning Electron Microscopes with Experimental Approaches for Performance Enhancement", Sensors, Vol. 20, No. 8, 2277, 2020. https://doi.org/10.3390/s20082277