Journal of the Korea institute for structural maintenance and inspection (한국구조물진단유지관리공학회 논문집)

Korea Institute for Structural Maintenance Inspection (한국구조물진단유지관리공학회)
권호 표지
DOI QR코드

DOI QR Code

Damage Index Evaluation Based on Dissipated Energy of SCH 40 3-Inch Carbon Steel Pipe Elbows Under Cyclic Loading

주기적 하중을 받는 SCH 40 3-Inch 탄소강관엘보의 소산에너지 기반의 손상지수 평가

  • 김성완 (부산대학교 지진방재연구센터) ;
  • 윤다운 (부산대학교 지진방재연구센터) ;
  • 전법규 (부산대학교 지진방재연구센터) ;
  • 김성도 (경성대학교 토목공학과)
  • Received : 2021.02.03
  • Accepted : 2021.02.24
  • Published : 2021.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

The failure mode of piping systems due to seismic loads is the low-cycle fatigue failure with ratcheting, and it was found that the element in which nonlinear behavior is concentrated and damage occurs is the elbow. In this study, to quantitatively express the failure criteria for a pipe elbow of SCH40 3-inch carbon steel under low-cycle fatigue, the limit state was defined as leakage, and the in-plane cyclic loading test was conducted. For the carbon steel pipe elbow, which is the vulnerable part to seismic load of piping systems, the damage index was represented using the moment-deformation angle relationship, and it was compared and analyzed with the damage index calculated using the force-displacement relationship. An attempt was made to quantitatively express the limit state of the carbon steel pipe elbow involving leakage using the damage index, which was based on the dissipated energy caused by repeated external forces.

지진하중으로 인한 배관계통의 파괴모드는 라체트를 동반하는 저주기 피로파괴이며 비선형 거동이 집중되고 파손이 발생하는 요소는 엘보인 것으로 나타났다. 본 연구에서는 저주기 피로에 의한 SCH 40 3인치 탄소강관엘보의 파괴기준을 정량적으로 표현하기 위하여 한계상태를 누수로 정의하고 면내반복가력실험을 수행하였다. 배관계통에서 지진하중에 취약한 요소인 탄소강관엘보에 대하여 모멘트-변형각의 관계를 이용한 손상지수를 나타내었으며 힘-변위의 관계를 이용하여 산정된 손상지수와 비교-분석하였다. 탄소강관엘보에 대하여 반복되는 외력에 의한 소산에너지에 기반을 둔 손상지수로서 누수가 발생한 한계상태를 정량적으로 표현하였다.

Keywords

References

  1. Ravi Kiran, A., Reddy, G. R., and Agrawal, M. K. (2019), Seismic fragility analysis of pressurized piping systems considering ratcheting: A case study, International Journal of Pressure Vessels and Piping, 169, 26-36. https://doi.org/10.1016/j.ijpvp.2018.11.013
  2. Xu, Z. D., Ge, T., and Miao, A. (2019), Experimental and theoretical study on a novel multi-dimensional vibration isolation and mitigation device for large-scale pipeline structure, Mechanical Systems and Signal Processing, 129, 546-567. https://doi.org/10.1016/j.ymssp.2019.04.054
  3. Koo, G. H., Kim, J. S., and Kim, Y. J. (2020), Feasibility study on strain-based seismic design criteria for nuclear components, Energies, 13(17), 13174435.
  4. Kim, S. W., Jeon, B. G., Hahm, D. G., and Kim, M. K. (2019), Seismic fragility evaluation of the base-isolated nuclear power plant piping system using the failure criterion based on stress-strain, Nuclear Engineering and Technology, 51(2), 561-572. https://doi.org/10.1016/j.net.2018.10.006
  5. Kwag, S. Y., Eem, S. H., Kwak, J. S., and Oh, J. H. (2020), Evaluation model of seismic response behavior and performance of nuclear plant piping systems, Journal of the Korean Society for Advanced Composite Structures, 11(1), 54-62. https://doi.org/10.11004/kosacs.2020.11.1.054
  6. Kim, S. W., Choi, H. S., Jeon, B. G., Hahm, D. G., and Kim, M. K. (2018), Strain and deformation angle for a steel pipe elbow using image measurement system under in-plane cyclic loading, Nuclear Engineering and Technology, 50(1), 190-202. https://doi.org/10.1016/j.net.2017.11.001
  7. Kim, S. W., Choi, H. S., Jeon, B. G., and Hahm, D. G. (2019b), Low-cycle fatigue behaviors of the elbow in a nuclear power plant piping system using the moment and deformation angle, Engineering Failure Analysis, 96, 348-361. https://doi.org/10.1016/j.engfailanal.2018.10.021
  8. Park, Y. J., Ang, A. H. S., and Wen, Y. K. (1987), Damage-limiting a seismic design of buildings, Earthquake Spectra, 3, 1-26. https://doi.org/10.1193/1.1585416
  9. Banon, H., and Veneziano, D. (1982), Seismic safety of reinforced concrete members and structures, Earthquake Engineering and Structural Dynamics, 10(2), 179-193. https://doi.org/10.1002/eqe.4290100202
  10. American Society of Mechanical Engineers (2004), ASME Boiler and Pressure Vessel Code, Section VIII, American Society Mechanical Engineers, New York, USA.
  11. Takahashi, K., Ando, K., Matsuo, K., and Urabe, Y. (2014), Estimation of low-cycle fatigue life of elbow pipes considering the multi-axial stress effect, Journal of Pressure Vessel Technology, 136(4), 041405. https://doi.org/10.1115/1.4026903
  12. Kim, S. W., Jeon, B. G., Cheung, J. H., and Kim, S. D. (2019), Low-cycle Fatigue Behaviors of the Steel Pipe Tee of a Nuclear Power Plant Using Image Signals, Journal of the Korea Institute for Structural Maintenance and Inspection, 23(6), 77-83.
  13. Kim, S. W., Yun, D. W., Cheung, J. H., and Kim, S. D. (2020), Limit State Assessment of SCH80 3-inch Steel Pipe Elbows Using Moment-deformation angle Relationship, Journal of the Korea Institute for Structural Maintenance and Inspection, 24(3), 16-23.
  14. Darwin, D., and Nmai, C. K. (1986), Energy dissipation in RC beams under cyclic load, Journal of Structural Engineering, 112(8), 1829-1846. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:8(1829)
  15. Krawinkler, H. (1987), Performance assessment of steel components, Earthquake Spectra, 3(1), 27-41. https://doi.org/10.1193/1.1585417
  16. Gosain, N. K., Brown, R. H., and Jirsa, J. O. (1977), Shear requirements for load reversals on RC members, Journal of Structural Engineering, 103(7), 1461-1476.
  17. Salimi Firoozabad, E., Jeon, B.G., Choi, H. S., and Kim, N. S. (2016), Failure criterion for steel pipe elbows under cyclic loading, Engineering Failure Analysis, 66(1), 515-525. https://doi.org/10.1016/j.engfailanal.2016.05.012
  18. Castiglioni, C. A., and Pucinotti, R. (2009), Failure criteria and cumulative damage models for steel components under cyclic loading, Journal of Constructional Steel Research, 65(4), 751-765. https://doi.org/10.1016/j.jcsr.2008.12.007
  19. Jeon, B. G., Kim, S. W., Choi, H. S., Park, D. U., and Kim, N. S. (2017), A failure estimation method of steel pipe elbows under in-plane cyclic loading, Nuclear Engineering and Technology, 49(1), 245-253. https://doi.org/10.1016/j.net.2016.07.006