열처리공학회지 (Journal of the Korean Society for Heat Treatment)

  • 제34권2호
  • /
  • Pages.60-65
  • /
  • 2021
  • /
  • 1225-1070(pISSN)
  • /
  • 2508-4046(eISSN)
한국열처리공학회 (The Korean Society for Heat Treatment)
권호 표지
DOI QR코드

DOI QR Code

가압형태와 발포제가 분말성형 발포법에 의해 제조된 알루미늄 발포체의 미세구조에 미치는 영향

The Effect of Pressing Type and Foaming Agent on the Microstructural Characteristic of Al Foam Produced by Powder Compact Processing

  • 최지웅 (부산대학교 나노메카트로닉스공학과) ;
  • 김혜성 (부산대학교 나노메카트로닉스공학과)
  • Choi, Ji Woong (Dept. of Nanomechatronics Engineering, Pusan National University) ;
  • Kim, Hye Sung (Dept. of Nanomechatronics Engineering, Pusan National University)
  • 투고 : 2021.02.09
  • 심사 : 2021.02.23
  • 발행 : 2021.03.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the effect of pressure type and foaming agent on the microstructural change of Al foam produced by powder compact processing was investigated. Better foaming characteristic is easily obtained from extrusion process with strong plastic deformation and preheating than that by uniaxial pressing with preheating. In current powder compact foaming process using TiH2/MgH2 mixture as a foaming agent, a temperature of 670℃ and addition of 30% MgH2 in TiH2 foaming agent was chosen as the most suitable foaming condition. The aluminum (Al) foams with maximum porosity of around 70%, relatively regular pore size and distribution were successfully produced by means of the powder metallurgy method and extrusion process.

키워드

참고문헌

  1. J. Banhart : Progress in Mater. Sci. 46 (2001) 559-632. https://doi.org/10.1016/S0079-6425(00)00002-5
  2. F. Simancik, J. Jerz, J. Kovacik, P. Minar : Kovove Mater.-Metall. Mater. 35 (1997) 265-277.
  3. G. J. Davies, S. Zhen : J. Mater. Sci. 18 (1983) 1899-1911. https://doi.org/10.1007/BF00554981
  4. T. Miyoshi, M. Itoh, S. Akiyama, and A. Kitahara, Adv. Eng. Mater. 2(4) (2000) 179-183. https://doi.org/10.1002/(SICI)1527-2648(200004)2:4<179::AID-ADEM179>3.0.CO;2-G
  5. C. J. Yu, H. H. Eifert, J. Banhart, J. Baumeister : Mater. Res. Innov. 2 (1998), 181-188. https://doi.org/10.1007/s100190050082
  6. J. Banhart, H. W. Seeliger : Metall. & Appl. 10 (2008), 793-802.
  7. I. Paulin, B. Sustarsic, V. Kevorkijan. S. D. Dkapin : MTAEC9 45(1) (2011) 13-17.
  8. Z. L. Song, L. Q. Ma, Z. J. Wu, H. De-Ping : J. Mater. Sci. 35 (2000) 15-20. https://doi.org/10.1023/A:1004715926692
  9. I. Paulin, D. Mandrino, C. Donik, M. Jenko : Mater. Tehnol. 44 (2010) 273-76
  10. C. Donik, A. Kocijan, J. T. Grant, M. Jenko, A. Drenik, B. Pihlar : Corro. Sci. 51 (2009) 827-832. https://doi.org/10.1016/j.corsci.2009.01.021
  11. C. Donik, A. Kocijan, D. Mandrino, I. Paulin, M. Jenko, B. Pihlar : Appl. Surf. Sci. 255 (2009), 7056-7061. https://doi.org/10.1016/j.apsusc.2009.03.041
  12. D. Mandrino, M. Jenko : Surf. Interface. Anal. 42 (2010) 762-765. https://doi.org/10.1002/sia.3212
  13. B. Matijasevic, J. Banhart : Scr. Mater. 54 (2006) 503-508. https://doi.org/10.1016/j.scriptamat.2005.10.045
  14. S. Asavavisithchai, A. R. Kennedy : Adv. eng. Mater. 8 (2006) 810-815. https://doi.org/10.1002/adem.200600067
  15. D. S. Schwartz and D. S. Shih : Materials Research Society Proceedings, Vol. 21, MRS, Warrendale PA, USA. (1998).