과제정보
This research was supported by the MSIT(Ministry of Science and ICT), Korea, under the ITRC(Information Technology Research Center) support program(IITP-2020-2020-0-01655) supervised by the IITP(Institute of Information & Communications Technology Planning & Evaluation) and the National Research Foundation (NRF) of Korea, funded by the Korea government (MSIP) (NRF-2019R1A2C2088962) and the Korea Agency for Infrastructure Technology Advancement under the Ministry of Land, Infrastructure and Transport of the Korean government (Project Number: 21CTAP-C164339-01).
참고문헌
- Ahmad, S., Anwar, A., Mohammed, B. S., Wahab, M. bin A. and Ahmad, S. A. (2019), "Strength behavior of concrete by partial replacement of fine aggregate with ceramic powder", Int. J. Recent. Technol. Eng., Vol.8, No.2, pp.5712-5718. https://doi.org/10.35940/ijrte.b3366.078219
- ASTM C109/C109M-20b Standard Test(2020), Method for Compressive Strength of Hydraulic Cement Mortars(Using 2-in. or [50mm] Cube Specimens). ASTM International: West Conshohocken, PA, USA.
- Chan, L. Y. and Andrawes, B. (2010), "Finite element analysis of carbon nanotube/cement composite with degraded bond strength", Computational Material Science, Vol.47, Issue 4, pp.994-1004. https://doi.org/10.1016/j.commatsci.2009.11.035
- Chang, I., Lee, M. and Cho, G. C. (2019), "Global CO2 Emission-Related Geotechnical Engineering Hazards and the Mission for Sustainable Geotechnical Engineering", Energies, 12(13), 2567. https://doi.org/10.3390/en12132567
- Chang, R., Asatyas1, S., Lkhamsuren1, G., Hirohara1, M. and Mondarte1, E. A. Q., "Suthiwanich, K., Sekine1, T., Hayashi, T.(2018), Water near bioinert self-assembled monolayers", Polymer J., 50, pp. 563-571. https://doi.org/10.1038/s41428-018-0075-1
- Chaipanich, A., Nochaiya, T., Wongkeo, W. and Torkittikul, P. (2010), "Compressive strength and microstructure of carbon nanotubes-fly ash cement composites", Mat. Sci. and Engr. : A, Vol.527, Issue 4-5, pp.1063-1067.
- Greenhouse Gas Inventory and Research Center/GIR (2021), National Greenhouse Gas. Inventory Report of Korea, GIR, Seoul, Republic of Korea.
- Han, J. G., Cho, J. W., Kim, S. W., Park, Y. S. and Lee, J. Y. (2020), "Characteristics of CO2 and Energy-Saving Concrete with Porous Feldspar", Materials, 13, 4204. https://doi.org/10.3390/ma13184204
- Kim, W. K., Kim, Y. H., Hong, G., Kim, J. M., Han, J. G. and Lee, J. Y. (2021), "Effect of Hydrogen Nanobubbles on the Mechanical Strength and Watertightness of Cement Mixtures", Materials, 14(8), 1823. https://doi.org/10.3390/ma14081823
- Kim, W. K. (2021), Enhancement of Durability and Watertightness of Cement Mixture Using Highly Concentrated Hydrogen Nano-Bubble Water, Master Thesis, Chung-Ang University, Seoul, Republic of Korea, pp.1-5.
- Korea Expressway Corporation (2009), Expressway construction Guide Specification, Gyeongsangbuk-do, Republic of Korea.
- Korea Land & Housing Corporation (2012), LH Guide Specification, Gyeongsangnam-do, Republic of Korea.
- Lee, C. Y. Bae, J. H. Kim, T. Y. Chang, S. H. and Kim, S. Y. (2015), "Using silane-functionalized graphene oxides for enhancing the interfacial bonding strength of carbon/epoxy composites", Composites: Part A, Vol.75, pp.11-17.
- Li, V. C., Wu, C., Wang, S., Ogawa, A. and Saito, T. (2002), "Interface tailoring for strainhardening polyvinyl alcoholengineered cementitious composite (PVA-ECC)", ACI Mater. J., Vol.99, pp.463-472.
- Lv, S., Qiu, C., Ma, Y. and Zhou, Q. (2013), "Regulation of GO on cement hydration crystals and its toughening effect", Mag. Concr. Res., Vol.65, Issue 20, pp.1246-1254. https://doi.org/10.1680/macr.13.00190
- Lv, S., Ting, S., Liu, J. and Zhou, Q. (2014), "Use of graphene oxide nanosheets to regulate the microstructure of hardened cement paste to increase its strength and toughness", Cryst. Eng. Comm. Vol.16, pp.8508-8516. https://doi.org/10.1039/C4CE00684D
- Lin, C., Wei, W. and Hu, Y. H. (2016), "Catalytic behavior of graphene oxide for cement hydration process", J. Phys. Chem. Solids., Vol.89, pp.128-133 https://doi.org/10.1016/j.jpcs.2015.11.002
- Maalej, M., Quek, S.T., Ahmed, S. F. U., Zhang, J., Lin, V. W. J. and Leong, K. S. (2012), "Review of potential structural applications of hybrid fiber engineered cementitious composites", Constr. Build. Mater., Vol.36, pp.216-227. https://doi.org/10.1016/j.conbuildmat.2012.04.010
- Marinkovic, S., Dragas, J., Ignjatovic, I. and Tosic, N. (2017), "Environmental assessment of green concretes for structural use", J. Clean. Prod., Vol.154, pp.633-649. https://doi.org/10.1016/j.jclepro.2017.04.015
- Ministry of Land, Infrastructure, and Transport/MOLIT (2014), A Study on the 5th general planning for aggregate supply, MOLIT; Sejong, Republic of Korea.
- Ministry of Land, Infrastructure, and Transport/MOLIT (2015), National highway construction Guide Specification, MOLIT; Sejong, Republic of Korea.
- Ministry of Land, Infrastructure, and Transport/MOLIT (2016a), Standard Specifications for cut slope construction, MOLIT; Sejong, Republic of Korea.
- Ministry of Land, Infrastructure, and Transport/MOLIT (2016b), Standard Specifications for road construction, MOLIT; Sejong, Republic of Korea.
- National institute of meteorological sciences/NIMR(2019), Report of global atmosphere watch 2018, pp.9-24, Jeju, Republic of Korea.
- Olivier, J.G., Peters, J.A. and Janssens-Maenhout, G. (2012), Trends in global CO2 emissions 2012 report, PBL Netherlands Environmental Assessment Agency, pp. 17.
- Pan, Z., He, L., Qiu, L., Korayem, A., Li, G., Zhu, J., Collins, F., Li, D., Duan, W. and Wang, M. (2015), "Mechanical properties and microstructure of a graphene oxide-cement composite", Cem. Concr. Compos., Vol.58, pp.140-147. https://doi.org/10.1016/j.cemconcomp.2015.02.001