DOI QR코드

DOI QR Code

Coating properties of PPG-based Polyurethane Dispersion wound covering resin by Addition of PVA

PVA의 첨가에 의한 PPG기반 수분산 창상피복수지의 코팅 물성

  • Lee, Joo-Youb (Department of Fire and Disaster Prevention, Jungwon University)
  • 이주엽 (중원대학교 융합과학기술대학 소방방재학과)
  • Received : 2021.02.06
  • Accepted : 2021.02.23
  • Published : 2021.02.28

Abstract

In this study, polyvinyl alcohol (PVA) and polypropylene glycol (PPG)-based polyurethane dispersion resin for wound coating was synthesized. And the physical properties of the sample were coated on the surface of the film sample and the leather (Full-Grain) to study the physical properties change. In the case of tensile strength, PUD-PA1, which reacted with the least amount of PVA, showed the highest resistance at 2.00 kgf/㎟. Likewise, the rate of elongation was measured as high as 554% for PUD-PA1, which reacted with the least amount of PVA. The abrasion resistance measurement result showed that as the PVA response increased, the strength of the surface decreased to 36.77 mg.loss.

본 연구에서는 폴리비닐알콜(PVA)와 폴리프로필렌글리콜(PPG)기반의 창상피복용 수분산 폴리우레탄수지를 합성하였으며, 시료의 물리적 특성을 필름 시료와 피혁(Full-Grain) 표면에 코팅을 하여 물리적 특성 변화를 연구하였다. 인장강도의 경우 PVA가장 적게 반응된 PUD-PA1 2.00 kgf/㎟ 으로 가장 높은 저항성을 보였으며. 마찬가지로 연실율은 PVA가장 적게 반응된 PUD-PA1가 554%로 높게 측정되었다. 내마모성 측정 결과 PVA 반응이 증가함에 따라 표면의 강도나 낮게 36.77 mg.loss로 감소됨을 알수 있었다.

Keywords

References

  1. I. Sakurada, Y. Ikada, H. Uehara, Y. Nishizaki, F. Horii, "Chemicalstructure of poly(vinyl alcohol)/methylmethacrylate graft copolymers preparedby various methods", Macromolecular Chemistry and Physics, Vol 139, pp.183-196, (1970). https://doi.org/10.1002/macp.1970.021390114
  2. H. D. Kim, Y. S. Oh, and J. H. Kim, "Development trend of high-strengthpoly (vinyl alcohol) fibers", Polymer Science and Technology. Vol.15, pp. 12-19, (2004)
  3. W. R White, D. T. Durocher, "Recycling of Rigid Polyurethane Articles and Reformulation into a Variety of Polyurethane Applications" Journal of cellular plastics, Vol.33, No.5, pp.477-86, (1997). https://doi.org/10.1177/0021955X9703300504
  4. Z. W. Abdullah, Y. Dong, I. J. Davis,and S. Barbhulya, "PVA, PVA blends, and their nanocomposites for biodegradable packaging application", Polymer-Plastics Technology and Engineering, Vol.56, pp.1307-1344, (2017). https://doi.org/10.1080/03602559.2016.1275684
  5. S. Toxqui-Lopez, A. Olivares-Perez, I. Fuentes-Tapia, "Polyvinyl acetate with cellulose dinitrate holograms", Optical Materials, Vol.28, pp.342-349, (2006). https://doi.org/10.1016/j.optmat.2005.01.022
  6. W. Han, H. Chen, X. Li, T. Zhang, "Thermodynamic modeling of magnesium ammonium phosphate cement and stability of its hydration products", Cement and Concrete Research, Vol.138, Article. 106223, (2020).
  7. H. D. Kim, Y. S. Oh, and J. H. Kim, "Development trend of high-strength poly (vinyl alcohol) fibers", Polymer Science and Technology. Vol.15, pp.12-19, (2004).
  8. Ya. A. Levin, L. Kh. Gazizova, T. A. Yagfarova, V. I. Kovalenko, B. Ya. "Teitelbaum, Diethylphosphonoacetals of polyvinyl alcohol", Polymer Science U.S.S.R, Vol.13, pp.646-652, (1970)
  9. Y. S. Kwak, S.W. Park, Y H. Lee, H. D. Kim. "Preparation and properties of waterborne polyurethanes for water-vapor-permeable coating materials". Journal of Applied Polymer Science, Vol.89, pp.123-129, (2003). https://doi.org/10.1002/app.12128
  10. S. M. Cakic, I. S. Ristic, I. Krakovsky, D. T. Stojiljkovis, P. Belsky, L. Kollova. "Crystallizationand thermal properties in waterborne polyurethane elastomers: influence of mixed soft segment block". Materials Chemistry and Physics, Vol.144, pp.31-40, (2014). https://doi.org/10.1016/j.matchemphys.2013.12.008
  11. U. Dorn, S. Enders, "Heat of mixing and liquideliquid-equilibrium of water + polypropylene glycol (PPG) with different molecular weights and water + propylene glycol dimethyl ether", Fluid Phase Equilibria, Vol.424, pp.58-67, (2016). https://doi.org/10.1016/j.fluid.2015.10.003
  12. A. Santamaria-Echart, I. Fernandes L. Ugarte, F. Barreiro, M. Corcuera, A. Eceiza, "Green nanocomposites from Salvia-based waterborne polyurethane-urea dispersions reinforced with nanocellulose", Progress in Organic Coatings, Vol.50, Article.105989, (2021).
  13. X. Cui, T. Hiraoka, T. Honda, Y. Hsu, T. Asoh, H. Uyama, "Oligoether grafting on cellulose microfibers for dispersion in poly(propylene glycol) and fabrication of reinforced polyurethane composite", Composites Science and Technology, Online.30, Article.108595, (2020).
  14. H. Liang, S. Wang, C. Zhang, "Aqueous anionic polyurethane dispersions from castor oil", Industrial Crops and Products, Vol.122, pp.182-189, (2018). https://doi.org/10.1016/j.indcrop.2018.05.079
  15. M. Fuensanta, J. Jofre-RecheJose, M. Martin-Martinez, "Structure and adhesion properties before and after hydrolytic ageing of polyurethane urea adhesives made with mixtures of waterborne polyurethane dispersions", International Journal of Adhesion and Adhesives, Vol.85, pp.165-176, (2018). https://doi.org/10.1016/j.ijadhadh.2018.06.002