DOI QR코드

DOI QR Code

In-situ dynamic loading test of a hybrid continuous arch bridge

  • Gou, Hongye (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Li, Liang (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Hong, Yu (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University) ;
  • Bao, Yi (Department of Civil, Environmental and Ocean Engineering, Stevens Institute of Technology) ;
  • Pu, Qianhui (Department of Bridge Engineering, School of Civil Engineering, Southwest Jiaotong University)
  • 투고 : 2019.01.22
  • 심사 : 2021.02.19
  • 발행 : 2021.03.25

초록

In this study, the dynamic behavior of a three-span hybrid continuous arch bridge under vehicle loading is investigated. The natural vibration characteristics of the bridge were analyzed through pulsation test. In the dynamic loading test, the vibrations of the bridge under different truck speeds and different pavement conditions were tested, and time histories of deflection and acceleration of the bridge were measured. Based on the dynamic loading test, the impact coefficient was analyzed. The results indicate that the pavement smoothness had more impacts on the vibration of the bridge than the truck's speed. The vertical damping of the bridge under the excitation of the trucks is larger than the transverse damping. Resonance occurs at the side span of the bridge under a truck at 10 km/h.

키워드

참고문헌

  1. Ahmet, C.A., Alemdar, B., Baris, S. and Hasan, O. (2011), "Experimental and analytical system identification of Eynel arch type steel highway bridge", J. Constr. Steel. Res., 67(12), 1912-1921. https://doi.org/10.1016/j.jcsr.2011.06.008.
  2. An, L., Li, D. J., Yu, P. and Yuan, P. (2016), "Numerical analysis of dynamic response of vehicle-bridge coupled system on long-span continuous girder bridge", Theo. Appl. Mech. Lett., 6(4), 186-194. https://doi.org/10.1016/j.taml.2016.05.006.
  3. Androus, A., Afefy, H.M. and Sennah, K. (2017), "Investigation of free vibration and ultimate behavior of composite twin-box girder bridges", J. Constr. Steel Res., 130, 177-192. https://doi.org/10.1016/j.jcsr.2016.12.017.
  4. Bencat, J., Stehlikova, M. and Skarupa, M. (2015), "Numerical and experimental assessment of the highway arch viaduct", Appl. Mech. Mater., 769, 252-259. https://doi.org/10.4028/www.scientific.net/AMM.769.252.
  5. Chen, S.S. and Sun, B.C. (2017), "The impact coefficient of the concrete filled steel tube arch bridge based on the vehicle-bridge coupling vibration", Journal of Nanchang University. (in Chinese)
  6. Chen, Z.X. (2014), "Study on impact coefficient of coupling vibration of vehicle bridge girder bridge with corrugated steel web box", Shanxi Arch., 40(13), 176-178. (in Chinese)
  7. Fang, N. (2015), "Dynamic analysis of concrete-filled steel tube arch bridge under vehicle load", Urban Road. Bridges Flood Control, 2015(06).
  8. Geng, Z., Sun, Y. and Pei, C. (2015), "Analysis and evaluation of static and dynamic load test of long-span arch bridge", J. Sichuan Univ. Sci. Eng., 2015(06). (in Chinese)
  9. Gou, H.Y., He, Y.N., Zhou, W., Bao, Y. and Chen, G.D. (2018f), "Experimental and numerical investigations of the dynamic responses of an asymmetrical arch railway bridge", P. I. Mech. Eng. F-J. Rai., 232(9), 2309-2323. https://doi.org/10.1177/0954409718766929.
  10. Gou, H.Y., Long, H., Bao, Y., Chen, G.D. and Pu, Q.H. (2019c), "Dynamic behavior of hybrid framed arch railway bridge under moving trains", Struct. Infrastr. Eng., 15(8), 1015-1024. https://doi.org/10.1080/15732479.2019.1594314.
  11. Gou, H.Y., Long, H., Bao, Y., Chen, G.D., Pu, Q.H. and Kang, R. (2018b), "Experimental and numerical studies on stress distributions in girder-arch-pier connections of long-span continuous rigid frame arch railway bridge", J. Bridge Eng., 23(7), 04018039. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001250.
  12. Gou, H.Y., Shi, X.Y, Zhou, W., Cui, K. and Pu, Q.H. (2018e), "Dynamic performance of continuous railway bridges: Numerical analyses and field tests", P. I. Mech. Eng. F-J. Rai., 232(3), 936-955. https://doi.org/10.1177/0954409717702019.
  13. Gou, H.Y., Wang, W., Shi, X.Y., Pu, Q.H. and Kang, R. (2018c), "Behavior of steel-concrete composite cable anchorage system", Steel Compos. Struct., 26(1), 115-123. https://doi.org/10.12989/scs.2018.26.1.115.
  14. Gou, H.Y., Yang, B., Guo, W. and Bao, Y. (2019b), "Static and dynamic responses of a tied-arch railway bridge under train load", Struct. Eng. Mech., 71(1), 13-22. https://doi.org/10.12989/sem.2019.71.1.013.
  15. Gou, H.Y., Yang, L.C., Leng, D., Bao, Y. and Pu, Q.H. (2018a), "Effect of bridge lateral deformation on track geometry of high-speed railway", Steel Compos. Struct., 29(2), 219-229. https://doi.org/10.12989/scs.2018.29.2.219.
  16. Gou, H.Y., Yang, L.C., Mo, Z.X., Guo, W., Shi, X.Y. and Bao, Y. (2019a), "Effect of long-term bridge deformations on safe operation of high-speed railway and vibration of vehicle-bridge coupled system", Int. J. Struct. Stab. Dyn., 19(9), 1950111. https://doi.org/10.1142/S0219455419501116.
  17. Gou, H.Y., Zhou, W., Chen, G.D, Bao, Y. and Pu, Q.H. (2018d), "In-situ test and dynamic analysis of a double-deck tied-arch bridge", Steel Compos. Struct., 27(2), 161-175. https://doi.org/10.12989/scs.2018.27.2.161.
  18. Gou, H.Y., Zhou, W., Yang C.W., Bao, Y. and Pu, Q.H. (2018g), "Dynamic response of long-span concrete-filled steel tube tied arch bridge and riding comfort of monorail trains", Appl. Sci., 8(4), 2076-3417. https://doi.org/10.3390/app8040650.
  19. Gu, Q., Liu, Y.D., Guo, W. and Li, W.Q. (2019), "A practical wheel-rail interaction element for modeling vehicle-track-bridge systems", Int. J. Struct. Stab. Dyn., 19(2), 27. https://doi.org/10.1142/S0219455419500111.
  20. Guo, W., Zhai, Z., Cui, Y., Yu, Z. and Wu, X. (2019), "Seismic performance assessment of low-rise precast wall panel structure with bolt connections", Eng. Struct., 181, 562-578. https://doi.org/10.1016/j.engstruct.2018.12.060.
  21. Han, Y., Li, H. and Xue, F.R. (2016), "Research on the impact coefficientof the concrete filled steel tube arch bridge based on the vehicle-bridge coupled vibration", J. Railway Sci. Eng., 13(3), 493-499. (in Chinese)
  22. Hou, W.Q., Li, Y.K., Guo, W., Li, J.L., Chen, Y.H. and Duan, X.X. (2018), "Railway vehicle induced vibration energy harvesting and saving of rail transit segmental prefabricated and assembling bridges", J. Clean Prod., 182, 946-959. https://doi.org/10.1016/j.jclepro.2018.02.019.
  23. Huang, X.Y., Zhuo, W.D. and Shang, G.P. (2013), "ANSYS-based spatial coupled vibration analysis method of vehicle-Bridge interaction system", Key Eng. Mater., 574, 117-126. https://doi.org/10.4028/www.scientific.net/KEM.574.117.
  24. Kalantari, A. and Amjadian, M. (2010), "An approximate method for dynamic analysis of skewed highway bridges with continuous rigid deck", Eng. Struct., 32(9), 2850-2860. https://doi.org/10.1016/j.engstruct.2010.05.004.
  25. Kashani, H. and Nobari, A.S. (2012), "Structural nonlinearity identification using perturbed eigen problem and ITD modal analysis method", Appl. Mech. Mater., 232, 949-954. https://doi.org/10.4028/www.scientific.net/AMM.232.949.
  26. Li, Y., Cai, C.S., Liu, Y., Chen, Y. and Liu, J. (2016), "Dynamic analysis of a large span specially shaped hybrid girder bridge with concrete-filled steel tube arches", Eng. Struct., 106, 243-260. https://doi.org/10.1016/j.engstruct.2015.10.026.
  27. Li, Z.J., Li, A.Q. and Miao, C.X. (2008), "Damage identification of rigid-frame arch bridge based on dynamic tests", J. Vib., Measure. Diagnos., 28(4), 387-389.
  28. Liu, B., Wang, Y.Z., Hu, P. and Yuan, Q. (2015), "Impact coefficient and reliability of mid-span continuous beam bridge under action of extra heavy vehicle with low speed", J. Cent. South Univ. T., 22(4), 1510-1520. https://doi.org/10.1007/s11771-015-2668-6.
  29. Pu, Q.H., Wang H.Y., Gou, H.Y., Bao, Y. and Yan, M. (2018), "Fatigue behavior of prestressed concrete beam for straddle-type monorail tracks", Appl. Sci., 8(7), 1136. https://doi.org/10.3390/app8071136.
  30. Shao, Y., Sun, Z.G. and Chen, Y.F. (2013), "Analysis of the impact effect of the suspender system in a half-through concrete filled steel tubular arch bridge", Appl. Mech. Mater., 477-478, 705-709. https://doi.org/10.4028/www.scientific.net/AMM.477-478.705.
  31. Wang, W. and Wang, L. (2014), "Study on static and dynamic load test of Huaronggou Bridge", Appl. Mech. Mater., 587-589, 1500-1506. https://doi.org/10.4028/www.scientific.net/AMM.587-589.1500.
  32. Wu, J.F., Zhang, Z.J. and Li, X.Z. (2012), "Analysis of dynamic response of simply-supported girder bridge in high-speed railway based on the moving rows mass-spring model", Appl. Mech. Mater., 193-194, 919-924. https://doi.org/10.4028/www.scientific.net/AMM.193-194.919.
  33. Xiao, Y. (2007), "Study of dynamic load test of Qinghua River Bridge of Wanyi Highway in Wuhu", Urban Road. Bridge. Flood Control., 2007(6).
  34. Xiao, Y.N., Liu, B.D., Li, P.F. and Ren, H.W. (2010), "Influence of irregular pavement on vehicle-bridge coupling vibration responses of bridge with corrugated steel webs", Civil Engineering in China-Current Practice and Research Report, 139-144. (in Chinese)
  35. Xu, J.L. and Zhang, Y.L. (2014), "Test and analysis of dynamic characteristics of reinforced concrete arch bridge", Appl. Mech. Mater., 599-601, 1081-1084. https://doi.org/10.4028/www.scientific.net/AMM.599-601.1081.
  36. Zhang, N. and Xia, H. (2013), "Dynamic analysis of coupled vehicle-bridge system based on inter-system iteration method", Comput. Struct., 114-115, 26-34. https://doi.org/10.1016/j.compstruc.2012.10.007.