DOI QR코드

DOI QR Code

Compressive behavior of steel stirrups-confined square Engineered Cementitious Composite (ECC) columns

  • Zheng, Pan-deng (School of Civil Engineering, Huaqiao University) ;
  • Guo, Zi-xiong (School of Civil Engineering, Huaqiao University) ;
  • Hou, Wei (School of Civil Engineering, Huaqiao University) ;
  • Lin, Guan (Department of Civil and Environmental Engineering, The Hong Kong Polytechnic University)
  • 투고 : 2020.10.25
  • 심사 : 2021.01.22
  • 발행 : 2021.03.25

초록

Extensive research has been conducted on the basic mechanical property and structural applications of engineered cementitious composites (ECC). Despite the high tensile ductility and high toughness of ECC, transverse steel reinforcement is still necessary to confine ECC for high performance. However, limited research has examined performance of ECC confined with practical amount of transverse reinforcement. This paper presents the results of axial compression tests on 14 square ECC columns and 4 conventional concrete columns (used as control specimens) with transverse reinforcement. The test variables were spacing, configuration (square ties or square and diamond shape ties), and yield strength of stirrups. The test showed that ECC columns confined with steel stirrup had good compressive ductility, and the stirrup spacing had the greatest effect on the compressive performance. The self-confinement effect of ECC results in a more uniform but slower expansion of the whole column compared with CC ones. The test results are then compared against the predictions from a number of existing models for conventional confined concrete. It is indicated that these models fail to predict the axial strains at peak axial stress and the trend of the stress-strain curve of steel stirrups-confined ECC with sufficient accuracy. Several new equations are then proposed for the compressive properties of steel-confined ECC based on test results and potential approaches for future studies are proposed.

키워드

참고문헌

  1. Dang, Z., Feng, P., Yang, J.Q. and Zhang, Q. (2020), "Axial compressive behavior of engineered cementitious composite confined by fiber-reinforced polymer", Compos. Struct., 243, 112191. https://doi.org/112191.10.1016/j.compstruct.2020.112191.
  2. Fischer, G. and Li, V.C. (2003), "Deformation behavior of fiber-reinforced polymer reinforced engineered cementitious composite (ECC) flexural members under reversed cyclic loading conditions", ACI Struct. J., 100(1), 25-35. https://doi.org/10.14359/12436.
  3. Fukuyama, H. (2000), "Structural performance of engineered cementitious composite elements", Composite and Hybrid Structures, 6th ASCCS International Conference on Steel-Concrete Composite Structures, 969-976.
  4. GB/T 50081-2002 (2003), Standard for Test Method of Mechanical Properties on Ordinary Concrete, China Architecture & Building Press, Beijing, China.
  5. Gencturk, B. and Elnashai, A.S. (2013a), "Numerical modeling and analysis of ECC structures", Mater. Struct., 46(4), 663-682. https://doi.org/10.1617/s11527-012-9924-0.
  6. Gencturk, B., Elnashai, A.S., Lepech, M.D. and Billington, S. (2013b), "Behavior of concrete and ECC structures under simulated earthquake motion", J. Struct. Eng., 139(3), 389-399. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000667.
  7. Gulsan, M.E., Mohammedameen, A., Sahmaran, M., Nis, A., Alzeebaree, R. and Cevik, A (2018), "Effects of sulphuric acid on mechanical and durability properties of ECC confined by FRP fabrics", Adv. Concrete Constr., 6(2), 199-220. http://dx.doi.org/10.12989/acc.2018.6.2.199.
  8. Hou, W., Lin, G., Li, X., Zheng, P. and Guo, Z. (2020), "Compressive behavior of steel spiral confined engineered cementitious composites in circular columns", Adv. Struct. Eng., 23(14), 3075-3088. https://doi.org/10.1177/1369433220928528.
  9. Hou, W., Xu, S.L., Ji, D.S., Li, Q.H. and Lin, G (2018), "Cyclic performance of steel plate-reinforced high toughness-concrete coupling beams with different span-to-depth ratios", J. Struct. Eng., 144(10), 04018170. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002175.
  10. Huang, B.T., Li, Q.H., Xu, S.L. and Zhang, L (2019b), "Static and fatigue performance of reinforced concrete beam strengthened with strain-hardening fiber-reinforced cementitious composite", Eng. Struct., 199, 109576. https://doi.org/10.1016/j.engstruct.2019.109576.
  11. Huang, B.T., Li, Q.H., Xu, S.L. and Zhou, B. (2019a), "Strengthening of reinforced concrete structure using sprayable fiber-reinforced cementitious composites with high ductility", Compos, Struct., 220, 940-952. https://doi.org/10.1016/j.compstruct.2019.04.061.
  12. Huang, B.T., Li, Q.H., Xu, S.L. and Zhou, B.M. (2017), "Frequency effect on the compressive fatigue behavior of ultrahigh toughness cementitious composites: Experimental study and probabilistic analysis", J. Struct. Eng., 143(8), 04017073. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001799.
  13. JC/T 2461-2018 (2018), Standard Test Method for the Mechanical Properties of Ductile Fiber Reinforced Cementitious Composites, Ministry of Industry & Information Technology, Beijing, China.
  14. Jiang, T. and Teng. J.G. (2007), "Analysis-oriented stress-strain models for FRP-confined concrete", Eng. Struct., 29(11), 2968-2986. https://doi.org/10.1016/j.engstruct.2007.01.010.
  15. Kojima, S.N., Kanda, T. and Hiraishi, M. (2004), "Application of direct sprayed ECC for retrofitting dam structure surface-application for Mitaka-Dam", JCI Concrete J., 42(5), 135-139. (in Japanese) https://doi.org/10.3151/coj1975.42.5_135
  16. Lee, C.K., Khan, M.K.I., Zhang, Y.X. and Rana, M.M. (2020), "Engineered cementitious composites (ECC) encased concrete-steel composite stub columns under concentric compression", Struct., 24, 386-399. https://doi.org/10.1016/j.istruc.2020.01.023.
  17. Legeron, F. and Paultre, P. (2003), "Uniaxial confinement model for normal and high-strength concrete columns", J. Struct. Eng., ASCE, 129(2), 241-252. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:2(241).
  18. Li, V.C. (2003), "On engineered cementitious composites (ECC)", J. Adv. Concrete Technol., 1(3), 215-230. https://doi.org/10.3151/jact.1.215.
  19. Li, V.C. (2019), Engineered Cementitious Composites (ECC) Bendable Concrete for Sustainable and Resilient Infrastructure, Springer-Verlag GmbH Press, Germany.
  20. Li, V.C. and Fischer, G. (2002), "Reinforced ECC-An evolution from materials to structures", Proceedings of the 1st fib Congress, Osaka, February.
  21. Li, V.C. and Leung, C.K.Y. (1992), "Steady-state and multiple cracking of short random fiber composites", J. Eng. Mech., 118(11), 2246-2264. https://doi.org/10.1061/(ASCE)0733-9399(1992)118:11(2246).
  22. Li, Y., Wang, W. and Wen, C. (2016), "Experiment study on mechanical performance of ECC under conventional triaxial compression", Concrete, 1, 59-63. (in Chinese)
  23. Maalej, M., Lin, V.W.J., Nguyen, M.P. and Quek, S.T. (2010), "Engineered cementitious composites for effective strengthening of unreinforced masonry walls", Eng. Struct., 32(8), 2432-2439. https://doi.org/10.1016/j.engstruct.2010.04.017.
  24. Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., ASCE, 114(8), 1804-1826. https://doi.org/10.1061/(ASCE)0733-9445(1988)114:8(1804).
  25. Mirmiran, A. and Shahawy, M. (1997), "Dilation characteristics of confined concrete", Mech. Cohesive-Frict. Mater., 2(3), 237-249. https://doi.org/10.1002/(SICI)1099-484(199707)2:3<237::AIDCFM32>3.0.CO;2.
  26. Naaman, A.E. and Reinhardt, H.W. (2015), "International workshop series on High Performance Fiber Reinforced Cement Composites (HPFRCC): History and evolution", 7th International RILEM Conference on High Performance Fiber Reinforced Cement Composites (HPFRCC7), Stuttgart, June.
  27. Panagiotakos, T.B. and Fardis, M.N. (2001), "Deformations of reinforced concrete members at yielding and ultimate", ACI Struc. J., 98(2), 135-148.
  28. Said, S.H. and Razak, H.A. (2015), "The effect of synthetic polyethylene fiber on the strain hardening behavior of engineered cementitious composite (ECC)", Mater. Des., 86, 447-457. https://doi.org/10.1016/j.matdes.2015.07.125.
  29. Sheikh, S.A. and Uzumeri, S.M. (1982), "Analytical model for concrete confinement in tied columns", J. Struct. Eng., ASCE, 108(12), 2703-2722. https://doi.org/10.1061/(ASCE)0733-9445(1989)115:11(2810).
  30. Sirijaroonchai, K., El-Tawil, S. and Parra-Montesinos, G. (2010), "Behavior of high performance fiber reinforced cement composites under multi-axial compressive loading", Cement Concrete Compos., 32(1), 62-72. https://doi.org/10.1016/j.cemconcomp.2009.09.003.
  31. Teng, J.G., Huang, Y.L., Lam, L. and Ye, L.P. (2007), "Theoretical model for fiber reinforced polymer-confined concrete.", J. Compos. Constr., 2(102), 1090-0268. https://doi.org/10.1061/(ASCE)1090-0268(2007)11:2(201).
  32. Xu, S.L. and Zhang, X.F. (2009), "Theoretical analysis and experimental investigation on flexural performance of steel reinforced ultrahigh toughness cementitious composite (ruhtcc) beams", Sci. China Ser. E, 52(4), 1068-1089. https://doi.org/10.1007/s11431-008-0338-8.
  33. Zhang, Y., Deng, M. and Dong, Z. (2019), "Seismic response and shear mechanism of engineered cementitious composite (ECC) short columns", Eng. Struct., 192, 296-304. https://doi.org/10.1016/j.engstruct.2019.05.019.
  34. Zhou, J.J., Pan, J.L., Leung, C.K.Y. and Li, Z.J. (2013), "Experimental study on mechanical behaviors of pseudo-ductile cementitious composites under biaxial compression", Sci. China Technol. Sci., 56(4), 963-969. https://doi.org/10.1007/s11431-013-5174-9.
  35. Zhou, J.K., Shen, W. and Wang, S.F. (2017), "Experimental study on torsional behavior of FRC and ECC beams reinforced with GFRP bars", Constr. Build. Mater., 152, 74-81. https://doi.org/10.1016/j.conbuildmat.2017.06.131.

피인용 문헌

  1. Seismic Behavior of Stone Masonry Joints with ECC as a Filling Material vol.14, pp.21, 2021, https://doi.org/10.3390/ma14216671