DOI QR코드

DOI QR Code

Research on The System Software Quality Certification Implementation Plan of DQ Mark Certification

DQ마크 인증제도의 시스템 소프트웨어 품질인증 수행 방안 연구

  • Received : 2020.09.29
  • Accepted : 2021.02.05
  • Published : 2021.02.28

Abstract

The DAPA (Defense Acquisition Program Administration) has been operating the DQ mark certification since 2012 to certify the superior technology and quality of munitions. On the other hand, the current DQ mark certification can not directly provide DQ mark certification to software because it is impossible to verify the quality of software alone. Therefore, this study analyzed domestic/overseas software quality evaluation/certification standards to find a way to verify the quality of software in the DQ mark certification. Among them, the method of applying the GS certification according to the international standard ISO/IEC 25000 series to the DQ mark certification was suggested as an improvement plan, and DQ mark certification verified the quality of software and provided certification. An attempt was made to expand the certification scope of DQ mark certification. This paper proposes that the DQ mark can be given to the system software by introducing GS certification to the DQ mark certification. To this end, an improved procedure for omitting the factory audit and verification by submitting a GS certificate for product evaluation is proposed. This is expected to increase defense exports using the granted DQ mark and improve the quality of defense software products through GS certification.

방위사업청은 2012년부터 군수품의 우수한 기술력과 품질을 인증하기 위해 DQ마크(Defense Quality Mark) 인증제도를 운영하고 있다. 하지만, 현행 DQ마크 인증제도는 소프트웨어(Software, SW) 단독 제품의 품질을 검증할 수 없어 소프트웨어 제품에 직접 DQ마크 인증을 부여하지 못하고 있다. 그러므로 본 논문은 DQ마크 인증제도에서 소프트웨어 제품의 품질을 검증할 방안을 찾기 위해 DQ마크 인증제도의 인증심사 절차와 국내·외 소프트웨어 품질평가, 인증 표준을 분석하였다. 그 중 국제표준인 ISO/IEC 25000 시리즈를 따르는 GS(Good Soft) 인증제도를 DQ마크 인증제도에 적용하는 방안을 개선방안으로 제시하여 DQ마크 인증제도에서 소프트웨어 제품의 품질을 검증하여 인증을 부여할 수 있도록 인증범위의 확대를 꾀하였다. 본 논문은 DQ마크 인증제도에 GS인증제도를 도입함으로써 시스템 소프트웨어 단독 제품에 대해 DQ마크 인증을 부여할 수 있도록 기존 인증절차에서 소프트웨어 제품 품질 평가에 불필요한 절차인 공장심사의 생략과 제품심사에 GS 인증서를 제출받아 검증하는 개선된 절차를 제안했고, 부여받은 DQ마크를 활용한 방산수출의 증대와 GS인증을 통한 국방 분야 소프트웨어 제품의 품질향상을 기대한다.

Keywords

References

  1. Defense Agency for Technology and Quality(DTaQ), "National defense science and technology vocabulary encylopedia", Onepub Inc., Korea, p.300, 2018.
  2. Korea Association of Defense Industry Studies(KADIS), "Korea defense industry 40 years history of endless challenge," KADIS, Korea, p.356, 2015.
  3. S. H. Kim, "Defense & Technology - Development plan of test and evaluation system for weapons system for export", Korea Defense Industry Association (KDIA), Korea, pp.38-49, 2008.
  4. H. J. Yu, "Introduction of military product quality certification and research on ways to expand company atonomy", DAPA, Korea, pp.83-85, 2018.
  5. DAPA, "Notice Regarding the operation of the DQ Mark certification", Notice, Korea, 2020.
  6. DAPA, "Defense development and defense export support system guide", DAPA, Korea, pp.42-46, 2019.
  7. DTaQ, "DQ Mark certification operational regulation", Operational Regulation, Korea, Jul. 2020.
  8. Ministry of Science and ICT(MSIT), "SP quality certification opreation guidelines", Notice, Korea, 2017.
  9. MSIT, "Detailed standards and procedures for software quality certification", Notice, Korea, 2017.
  10. GS certification 1st class product list [Internet], Telecommunications Technology Association(TTA), Available From : https://sw.tta.or.kr/product/prod_gsce.jsp (accessed Jul. 24, 2020)