DOI QR코드

DOI QR Code

An optimization framework for curvilinearly stiffened composite pressure vessels and pipes

  • Singh, Karanpreet (Kevin T. Crofton Department of Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University) ;
  • Zhao, Wei (Kevin T. Crofton Department of Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University) ;
  • Kapania, Rakesh K. (Kevin T. Crofton Department of Aerospace and Ocean Engineering, Virginia Polytechnic Institute and State University)
  • 투고 : 2019.11.10
  • 심사 : 2020.07.28
  • 발행 : 2021.01.25

초록

With improvement in innovative manufacturing technologies, it became possible to fabricate any complex shaped structural design for practical applications. This allows for the fabrication of curvilinearly stiffened pressure vessels and pipes. Compared to straight stiffeners, curvilinear stiffeners have shown to have better structural performance and weight savings under certain loading conditions. In this paper, an optimization framework for designing curvilinearly stiffened composite pressure vessels and pipes is presented. NURBS are utilized to define curvilinear stiffeners over the surface of the pipe. An integrated tool using Python, Rhinoceros 3D, MSC.PATRAN and MSC.NASTRAN is implemented for performing the optimization. Rhinoceros 3D is used for creating the geometry, which later is exported to MSC.PATRAN for finite element model generation. Finally, MSC.NASTRAN is used for structural analysis. A Bi-Level Programming (BLP) optimization technique, consisting of Particle Swarm Optimization (PSO) and Gradient-Based Optimization (GBO), is used to find optimal locations of stiffeners, geometric dimensions for stiffener cross-sections and layer thickness for the composite skin. A cylindrical pipe stiffened by orthogonal and curvilinear stiffeners under torsional and bending load cases is studied. It is seen that curvilinear stiffeners can lead to a potential 10.8% weight saving in the structure as compared to the case of using straight stiffeners.

키워드

참고문헌

  1. Alcantar, V., Aceves, S.M., Ledesma, E., Ledesma, S. and Aguilera, E., (2017), "Optimization of Type 4 composite pressure vessels using genetic algorithms and simulated annealing", Int. J. Hydrogen Energy, 42(24), 15770-15781. https://doi.org/10.1016/j.ijhydene.2017.03.032.
  2. Alcantar, V., Ledesma, S., Aceves, S.M., Ledesma, E. and Saldana, A., (2017). "Optimization of type III pressure vessels using genetic algorithm and simulated annealing". International Journal of Hydrogen Energy, 42(31), 20125-20132. https://doi.org/10.1016/j.ijhydene.2017.06.146
  3. Chen, X., Wang, X., Qiu, Z., Wang, L., Li, X. and Shi, Q., (2018), "A novel reliability-based two-level optimization method for composite laminated structures", Compos. Struct., 192, 336-346. https://doi.org/10.1016/j.compstruct.2018.03.016
  4. Colombo, C. and Vergani, L. (2018), "Optimization of filament winding parameters for the design of a composite pipe", Composites Part B: Eng., 148, 207-216. https://doi.org/10.1016/j.compositesb.2018.04.056.
  5. Dorey, A., Murray, D., Cheng, J., Grondin, G. and Zhou, Z. (1999), "Testing and experimental results for NPS30 line pipe under combined Loads", In Proceedings of the 18th International Conference on OMAE.
  6. Kapania, R.K., Li, J. and Kapoor, H. (2005), "Optimal design of unitized panels with curvilinear stiffeners", In AIAA 5th Aviation, Technology, Integration, and Operations Conference (ATIO)/16th Lighter-thanAir and Balloon Systems Conference, AIAA 2005-7482. https://doi.org/10.2514/6.2005-7482.
  7. Kidane, S., Li, G., Helms, J., Pang, S.S. and Woldesenbet, E. (2003), "Buckling load analysis of grid stiffened composite cylinders", Compos. Part B: Eng., 34(1), 1-9. https://doi.org/10.1016/S1359-8368(02)00074-4.
  8. Krikanov, A.A. (2000), "Composite pressure vessels with higher stiffness", Compos. Struct., 48(1-3), 119-127. https://doi.org/10.1016/S0263-8223(99)00083-5.
  9. Limam, A., Lee, L.H., Corona, E. and Kyriakides, S. (2010), "Inelastic wrinkling and collapse of tubes under combined bending and internal pressure", Int. J. Mech. Sci., 52(5), 637-647. https://doi.org/10.1016/j.ijmecsci.2009.06.008.
  10. Liu, G., Wei, G. and Gao, H. (2019), "A novel structure of woven composite pressure pipes and its multiscale analysis". J. Textile Institute, 1-10. https://doi.org/10.1080/00405000.2019.1610204.
  11. Paquette, J. and Kyriakides, S. (2006), "Plastic buckling of tubes under axial compression and internal pressure", Int. J. Mech. Sci., 48(8), 855-867. https://doi.org/10.1016/j.ijmecsci.2006.03.003.
  12. Parnas, L. and Katirci, N. (2002), "Design of fiber-reinforced composite pressure vessels under various loading conditions", Compos. Struct., 58(1), 83-95. https://doi.org/10.1016/S0263-8223(02)00037-5.
  13. Singh, K., Zhao, W. and Kapania, R.K. (2017), "Optimal design of curvilinearly stiffened shells", In the 58th AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, AIAA 2017-1830. https://doi.org/10.2514/6.2017-1830.
  14. Singh, K., Zhao, W., Jrad, M. and Kapania, R.K. (2019), "Hybrid optimization of curvilinearly stiffened shells using parallel processing", J. Aircraft, 56(3), 1068-1079. https://doi.org/10.2514/1.C035069.
  15. Zhao, W. and Kapania, R.K. (2016), "Buckling analysis of unitized curvilinearly stiffened composite panels", Compos. Struct., 135, 365-382. https://doi.org/10.1016/j.compstruct.2015.09.041
  16. Zhao, W. and Kapania, R.K. (2019), "Bilevel programming weight minimization of composite flying-wing aircraft with curvilinear spars and ribs", AIAA J., 57(6), 2594-2608. https://doi.org/10.2514/1.J057892.