References
- Achmus, M., Akdag, C. and Thieken, K. (2013), Load-bearing behavior of suction bucket foundations in sand, Applied Ocean Research 43, 157-165. https://doi.org/10.1016/j.apor.2013.09.001
- Bolton, M. (1986), The strength and dilatancy of sands, Geotechnique, 36(1), 65-78. https://doi.org/10.1680/geot.1986.36.1.65
- Craig, W. and Chua, K. (1990), Deep penetration of spud-can foundations on sand and clay. Geotechnique 40(4), 541-556. https://doi.org/10.1680/geot.1990.40.4.541
- Hanna, A. and Meyerhof, G.J.C.G.J. (1980), Design charts for ultimate bearing capacity of foundations on sand overlying soft clay, 17(2), 300-303. https://doi.org/10.1139/t80-030
- Hatanaka, M. and Uchida, A. (1996), Empirical correlation between penetration resistance and internal friction angle of sandy soils. Soils and foundations, 36(4), 1-9. https://doi.org/10.3208/sandf.36.4_1
- Hossain, M. (2014), Experimental investigation of spudcan penetration in multi-layer clays with interbedded sand layers, Geotechnique, 64(4), 258-276. https://doi.org/10.1680/geot.12.P.194
- Hu, P., Stanier, S. A., Cassidy, M. J. and Wang, D. (2014a), Predicting peak resistance of spudcan penetrating sand overlying clay, Journal of Geotechnical and Geoenvironmental Engineering, 140(2), 04013009. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001016
- Hu, P., Wang, D., Cassidy, M. J. and Stanier, S. A. (2014b), Predicting the resistance profile of a spudcan penetrating sand overlying clay, Canadian Geotechnical Journal, 51(10), 1151-1164. https://doi.org/10.1139/cgj-2013-0374
- Hu, P., Wang, D., Stanier, S. A. and Cassidy, M. J. (2015), Assessing the punch-through hazard of a spudcan on sand overlying clay, Geotechnique, 65(11), 883-896. https://doi.org/10.1680/jgeot.14.P.097
- Lee, K., Cassidy, M. and Randolph, M. (2013), Bearing capacity on sand overlying clay soils: experimental and finite-element investigation of potential punch-through failure, Geotechnique, 63(15), 1271. https://doi.org/10.1680/geot.12.P.175
- Park, J.-S. and Park, D. (2017), Vertical bearing capacity of bucket foundation in sand overlying clay, Ocean Engineering, 134, 62-76. https://doi.org/10.1016/j.oceaneng.2017.02.015
- Qiu, G. and Grabe, J. (2012), Numerical investigation of bearing capacity due to spudcan penetration in sand overlying clay, Canadian Geotechnical Journal, 49(12), 1393-1407. https://doi.org/10.1139/t2012-085
- Qiu, G. and Henke, S. (2011), Controlled installation of spudcan foundations on loose sand overlying weak clay, Marine structures, 24(4), 528-550. https://doi.org/10.1016/j.marstruc.2011.06.005
- SNAME (2008), Guidelines for site specific assessment of mobile jack-up units, T R Bullitin 5-5A, 366.
- Teh, K.-L. (2007), Punch-through of spudcan foundation in sand overlying clay, Doctor of Philosophy PhD thesis, National University of Singapore, Singapore.
- Teh, K., Leung, C., Chow, Y. and Cassidy, M. (2010), Centrifuge model study of spudcan penetration in sand overlying clay, Geotechnique, 60(11), 825. https://doi.org/10.1680/geot.8.P.077
- Ullah, S. N., Stanier, S., Hu, Y. and White, D. (2017), Foundation punch-through in clay with sand: centrifuge modelling, Geotechnique, 67(10), 870-889. https://doi.org/10.1680/jgeot.16.P.100
- White, D., Teh, K., Leung, C. and Chow, Y. (2008), A comparison of the bearing capacity of flat and conical circular foundations on sand, Geotechnique, 58(10), 781-792. https://doi.org/10.1680/geot.2008.3781