References
- Ji, H., Kweon, J.H., and Choi, J.H., "Fatigue Characteristics of Stainless Steel Pin-reinforced Composite Hat Joints," Journal of Composite Structures, Vol. 108, 2014, pp. 49-56. https://doi.org/10.1016/j.compstruct.2013.08.040
- Jones, R.M., Mechanics of Composite Materials 2nd edition, Taylor & Framcis Inc, 1999.
- Mouritz, A.P., Bannister, M.K., Falzon, P.J., and Leong, K.H., "Review of Applications for Advanced Three-dimensional Fibre Textile Composites", Journal of Composites Part A, Vol. 30, No. 12, 1999, pp. 1445-1461. https://doi.org/10.1016/S1359-835X(99)00034-2
- Ayranci, C., and Carey, J., "2D Braided Composites: A Review for Stiffness Critical Applications," Journal of Composite Structures, Vol. 85, No. 1, 2008, pp. 43-58. https://doi.org/10.1016/j.compstruct.2007.10.004
- Chou, S., and Chen, H.E., "The Weaving Methods of Three-dimensional Fabrics of Advanced Composite Materials," Journal of Composite Structures, Vol. 33, No. 3, 1995, pp. 159-172. https://doi.org/10.1016/0263-8223(95)00120-4
- Chi, H., Li, Y., Koussios, S., Zu, L., and Beukers, A., "Bridging Micromechanisms of z-pin in Mixed Mode Delamination," Journal of Composite Structures, Vol. 93, No. 11, 2011, pp. 2685-2695. https://doi.org/10.1016/j.compstruct.2011.06.004
- Ko, F.K., Three-dimensional Fabrics for Composites, Composite Materials Series. Amsterdam: Elsevier Science, 1989.
- Kim, C.H., Jo, D.H., and Choi, J.H., "Failure Strength of Composite T-joint Prepared Using a New 1-thread Stitching Process," Journal of Composite Structures, Vol. 178, 2017, pp. 225-231. https://doi.org/10.1016/j.compstruct.2017.07.003
- Tapullima, J., Kim, C.H., and Choi, J.H., "Analysis and Experiment on DCB Specimen Using I-fiber Stitching Process," Journal of Composite Structures, Vol. 220, 2019, pp. 521-528. https://doi.org/10.1016/j.compstruct.2019.04.020
- Tapullima, J., Sim, H.W., Kweon, J.H., and Choi, J.H., "Analysis on Stitched Mode I Specimen Using Spring Elements," Composites Research, Vol. 32, No. 2, 2019, pp. 102-107. https://doi.org/10.7234/composres.2019.32.2.102
- Kim, C.H., Sim, H.W., An, W.J., Kweon, J.H., and Choi, J.H., "Impact Characteristics of Composite Panel Stitched by I-fiber Process," Journal of Composites Part A, Vol. 127, 2019, pp. 105644. https://doi.org/10.1016/j.compositesa.2019.105644
- An, W.J., Kim, C.H., Choi, J.H., and Kweon, J.H., "Static Strength of RTM Composite Joint with I-fiber Stitching Process," Journal of Composite Structures, Vol. 210, 2019, pp. 348-353. https://doi.org/10.1016/j.compstruct.2018.11.072
- Tapullima, J., Song, S.H., Kweon, J.H., and Choi, J.H., "Characterization of Mode II Specimen Using I-fiber Stitching Process," Journal of Composite Structures, Vol. 225, 2021, pp. 112863.
- Park, G.Y., "Evaluation and Analysis of Mode I Failure Load for Single Stitched Fiber," Master Thesis, Gyeongsang National University, 2020.
- Yan, Y., and Shang, F., "Cohesive Zone Modeling of Interfacial Delamination in PZT Thin Films," International Journal of Solids and Structures, Vol. 46, No. 13, 2009, pp. 2739-2749. https://doi.org/10.1016/j.ijsolstr.2009.03.002
- Kravchenko, S., Krsvchenko, O., Wortmann, M., Pietrek, M., Horst, P., and Pipes, R.B., "Composite Toughness Enhancement with Interlaminar Reinforcement," Journal of Composites Part A, Vol. 54, 2013, pp. 98-106. https://doi.org/10.1016/j.compositesa.2013.07.006
- Bianchi, F., and Zhang, X., "A Cohesive Zone Model for Predicting Delamination Suppression on z-pinned Laminates", Composites Science and Technology, Vol. 71, No. 16, 2011, pp. 1898-1907. https://doi.org/10.1016/j.compscitech.2011.09.004
- Mohamed, G., Allegri, G., Yasaee, M., and Hallett, S.R., "Cohesive Element Formulation for z-pin Delamination Bridging in Fibre Reinforced Laminates," International Journal of Solids and Structures, Vol. 132-133, 2017, pp. 232-244 https://doi.org/10.1016/j.ijsolstr.2017.05.037
- Heidari-Rarani, M., and Ghasemi, A.R., "Appropriate Shape of Cohesive Zone Model for Delamination Propagation in ENF Specimens with R-curve Effects," Theoretical and Applied Fracture Mechanics, Vol. 90, 2017, pp. 174-181. https://doi.org/10.1016/j.tafmec.2017.04.009
- Alfano, G., and Crisfeld, M.A., "Finite Element Interface Models for the Delamination Analysis of Laminated Composites: Mechanical and Computational Issues," International Journal for Numerical Methods in Engineering. Vol. 50, No. 7, 2001, pp. 1701-1736. https://doi.org/10.1002/nme.93
- Islam, M.S., "Fracture and Delamination in Packaging Materials," PhD Thesis, Blekinge Institute of Technology, 2019.
- Gutkin, R., Laffan, M.L., Pinho, S.T., Robinson, P., and Curtis, P.T., "Modelling the R-curve Effect and Its Specimen-dependence," International Journal of Solids and Structures, Vol. 48, No. 11-12, 2011, pp. 1767-1777. https://doi.org/10.1016/j.ijsolstr.2011.02.025
- Diehl, T., "On Using a Penalty-based Cohesive-zone Finite Element Approach, Part II: Inelastic Peeling if an Epoxy-bonded Aluminium Strip," International Journal of Adhesion and Adhesives, Vol. 28, No. 4-5, 2008, pp. 256-265. https://doi.org/10.1016/j.ijadhadh.2007.06.004