DOI QR코드

DOI QR Code

교반기의 임펠러 형태에 따른 폴리우레탄 폼의 미세구조와 물성 연구

Study on Microstructure and Physical Properties of PUF by the Impeller Type of Agitator

  • Lee, Chae-Rim (Carbon Composite Department, Korea Institute of Materials Science (KIMS)) ;
  • Kim, Jung Soo (Carbon Composite Department, Korea Institute of Materials Science (KIMS)) ;
  • Park, Byeongho (Carbon Composite Department, Korea Institute of Materials Science (KIMS)) ;
  • Um, Moon-Kwang (Carbon Composite Department, Korea Institute of Materials Science (KIMS)) ;
  • Park, Teahoon (Carbon Composite Department, Korea Institute of Materials Science (KIMS))
  • 투고 : 2020.11.11
  • 심사 : 2020.12.28
  • 발행 : 2021.02.28

초록

폴리우레탄폼(PUF)은 연질, 반경질, 경질 형태로 제작이 가능하여 산업적으로 다양한 분야에서 활용되고 있다. 그 중에서도 경질 폴리우레탄폼은 우수한 기계적 특성과 낮은 열전도도를 가지고 있어, 건축물의 단열재와 천연가스 운수송 분야에서 보냉재로 사용되고 있다. 해당 분야에서는 기계적 강도는 높이고 열전도도는 낮추고자 하는 기술적 수요가 꾸준히 요구되고 있다. 본 연구에서는 경질 폴리우레탄폼을 제작하고, 교반기의 임펠러 형태(Propeller, Dispersed turbine)에 따른 폼의 미세구조와 물성 변화를 연구하였다. FE-SEM 이미지 및 Micro-CT 분석을 통해 Dispersed turbine으로 제조한 폼의 평균 기공 크기가 Propeller로 제조한 기공보다 21.5% 작은 것을 확인하였다. 압축 강도는 작은 기공을 가진 폼에서 15.4% 향상되었고, 열전도도는 3.1% 감소하였다. 이러한 결과는 PUF 복합재 제조에 활용될 수 있다.

Polyurethane foam (PUF) can be manufactured in soft, semi-rigid, and hard forms, so it is used in various fields industrially. Among them, rigid PUF has excellent mechanical properties and low thermal conductivity, and is used as a thermal insulation material for buildings and as a cold insulation material in the natural gas transportation field. In this field, there is a steady demand on higher mechanical strength and lower thermal conductivity. In this study, a rigid PUF was manufactured, and the microstructure and physical properties were studied according to the impeller type (propeller, dispersed turbine) of the agitator. Through FE-SEM and Micro-CT analysis, it was confirmed that the average pore size of the foam manufactured with the dispersed turbine was 21.5% smaller than that of the pore made by the propeller. The compressive strength was improved by 15.4%, and the thermal conductivity decreased by 3.1% in the foam with small pores. This result can be utilized for fabricating PUF composites.

키워드

참고문헌

  1. Park, Y.G., Lee, J.H., Joo, A.R., and Lee, S.H., "Effect of Nano-bubble Application on the Properties of Water Blown Rigid Polyurethane Foam," Polymer, Vol. 42, No. 2, 2018, pp. 215-222. https://doi.org/10.7317/pk.2018.42.2.215
  2. Rao, R.R., Mondy, L.A., Long, K.N., Celina, M.C., Wyatt, N., Roberts, C.C., Soehnel, M.M., and Brunini, V.E., "The Kinetics of Polyurethane Structural Foam Formation: Foaming and Polymerization," AIChE Journal, Vol. 63, No. 7, 2017, pp. 2945-2957. https://doi.org/10.1002/aic.15680
  3. Brenes-Granados, D., Cubero-Sesin, J.M., Orozco Gutierrez, F., Vega-Baudrit, J., and Gonzalez-Paz, R., "Variation of Physical Properties of Rigid Polyurethane Foams Synthesized from Renewable Sources with Different Commercial Catalysts," Journal of Renewable Materials, Vol. 5, No. 3-4, 2017, pp. 280-289. https://doi.org/10.7569/JRM.2017.634118
  4. Cao, X., James Lee, L., Widya, T., and Macosko, C., "Polyurethane/clay Nanocomposites Foams: Processing, Structure and Properties," Polymer, Vol. 46, No. 3, 2005, pp. 775-783. https://doi.org/10.1016/j.polymer.2004.11.028
  5. Javni, I., Song, K., Lin, J., and Petrovic, Z.S., "Structure and Properties of Flexible Polyurethane Foams with Nano- and Micro-fillers," Journal of Cellular Plastics, Vol. 47, No. 4, 2011, pp. 357-372. https://doi.org/10.1177/0021955X11398115
  6. Modesti, M., Lorenzetti, A., and Besco, S., "Influence of Nanofillers on Thermal Insulating Properties of Polyurethane Nanocomposites Foams," Polymer Engineering and Science, Vol. 47, No. 9, 2007, pp. 1351-1358. https://doi.org/10.1002/pen.20819
  7. Guo, A., Javni, I., and Petrovic, Z., "Rigid Polyurethane Foams Based on Soybean Oil," Journal of Applied Polymer Science, Vol. 77, No. 2, 2000, pp. 467-473. https://doi.org/10.1002/(SICI)1097-4628(20000711)77:2<467::AID-APP25>3.0.CO;2-F
  8. You, K.M., Park, S.S., Lee, C.S., Kim, J.M., Park, G.P., and Kim, W.N., "Preparation and Characterization of Conductive Carbon Nanotube-polyurethane Foam Composites," Journal of Materials Science, Vol. 46, No. 21, 2011, pp. 6850-6855. https://doi.org/10.1007/s10853-011-5645-y
  9. Paul, E.L., Atiemo-Obeng, V.A., and Kresta, S.M., Handbook of Industrial Mixing: Science and Practice, Wiley-Interscience, Hoboken, 2004.
  10. Kim, C.B., and Kim, S.B., "Study on the Properties of Flexible Polyurethane Foam at the Aging Condition," Journal of the Korean Institute of Gas, Vol. 16, No. 6, 2012, pp. 123-127. https://doi.org/10.7842/kigas.2012.16.6.123
  11. Gogoi, R., Alam, M., and Khandal, R., "Effect of Increasing NCO/OH Molar Ratio on the Physicomechanical and Thermal Properties of Isocyanate Terminated Polyurethane Prepolymer," International Journal of Basic and Applied Sciences, Vol. 3, No. 2, 2014, pp. 118-123.
  12. Kim, D.E., Kang, S.O., and Lee, S.H., "Effect of NCO Index on the Particle Size of Polycarbonate Diol-based Polyurethane Dispersion," Elastomers and Composites, Vol. 55, No. 1, 2020, pp. 20-25. https://doi.org/10.7473/ec.2020.55.1.20
  13. Shakirova, G.D., Romanova, N.V., and Shafigullin, L.N., "The Influence of Heat Treatment on the Quality of Vehicle Component Parts Made of Rigid Polyurethane Foam," Materials Science Forum, Vol. 989, 2020, pp. 10-15. https://doi.org/10.4028/www.scientific.net/MSF.989.10
  14. Liszkowska, J., and Czuprynski, B., "Thermal Properties of Polyurethane-Polyisocyanurate (PUR-PIR) Foams Modified with Tris(5-Hydroxypenthyl) Citrate," Journal of Advanced Chemical Engineering, Vol. 6, No. 2, 2016.
  15. Wang, T.P., Zheng, Z.M., and Mao, Z.H., "Characterization of Polyurethane Foams Prepared from Non-pretreated Liquefied Corn Stover with PAPI," The Canadian Journal of Chemical Engineering, Vol. 89, No. 1, 2011, pp. 171-175. https://doi.org/10.1002/cjce.20381
  16. Li, Y., and Ragauskas, A.J., "Ethanol Organosolv Lignin-based Rigid Polyurethane Foam Reinforced with Cellulose Nanowhiskers," RSC Advances, Vol. 2, No. 8, 2012, pp. 3347-3351. https://doi.org/10.1039/c2ra00646d
  17. Park, K.K., and Lee, S.H., "Thermal Decomposition of Ammonium Polyphosphate-polyurethane Composite Foam Brown H2O," Elastomers and Composites, Vol. 50, No. 4, 2015, pp. 297-303. https://doi.org/10.7473/EC.2015.50.4.297
  18. Shin, H.K., and Lee, S.H., "Effect of Catalyst Type and NCO Index on the Synthesis and Thermal Properties of Poly(urethaneisocyanurate) Foams," Elastomers and Composites, Vol. 53, No. 2, 2018, pp. 86-94. https://doi.org/10.7473/EC.2018.53.2.86
  19. Lee, B.J., and Kim, S.B., "Mechanical Properties and Flame Retardancy of Rigid Polyurethane Foam Using New Phosphorus Flame Retardant," Applied Chemistry for Engineering, Vol. 27, No. 6, 2016, pp. 577-582. https://doi.org/10.14478/ace.2016.1079