Acknowledgement
이 논문은 2018년도 정부(교육부)의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업임(2018R1D1A1B07047982)
References
- Bieniawski Z.T., 1978, Determining rock mass deformability: experience from case histories, Int. J. Rock Mech. Min. Sci., 15, 237-247. https://doi.org/10.1016/0148-9062(78)90956-7
- Bieniawski, Z. T., 1968, The effect of specimen size on compressive strength of coal, Int. J. Rock Mech. and Min. Sci., 5, 321-335. https://doi.org/10.1016/0148-9062(68)90004-1
- Bieniawski, Z.T. and Van Heerden, W.L., 1975, The significance of in-situ tests on large rock specimens, Int. J. Rock Mech. and Min. Sci., 12, 101-113. https://doi.org/10.1016/0148-9062(75)90004-2
- Castelli M., Saetta V. and Scavia C., 2003, Numerical study of scale effects on the stiffness modulus of rock masses, Int. J. Geomech., 3, 160-169. https://doi.org/10.1061/(ASCE)1532-3641(2003)3:2(160)
- Fu P. and Dafalias Y.F., 2015, Relationship between void- and contact normal-based fabric tensors for 2D idealized granular materials. Int. J. Soilds Struct. 63, 68-81. https://doi.org/10.1016/j.ijsolstr.2015.02.041
- Hardin E.L., Barton N.R., Lingle R., Board M.P. and Voegele, M.D., 1982, A heated flaljack test to measure the thennomechanical and transport properties of rock masses, Office of Nuclear Waste Isolation, Columbus, Ohio, 203p.
- Harrison J.P. and Hudson J.A., 1997, Engineering rock mechanics-an introduction to the principles, Oxford, Elsevier, 444p.
- Itasca, 2016, 3DEC(v.5.2) User's Guide, Itasca Consulting Group, Inc.
- Kanatani K.I., 1984, Distribution of directional data and fabric tensors. Int. J. Eng. Sci., 22, 149-164. https://doi.org/10.1016/0020-7225(84)90090-9
- Kulatilake P.H.S.W., Ucpirti H., Wang S., Radberg G. and Stephansson O., 1992, Use of the distinct element method to perform stress analysis in rock with non-persistent joints to study the effect of joint geometry parameters on the strength and deformability of rock masses, Rock Mech. and Rock Eng, 25, 253-274. https://doi.org/10.1007/BF01041807
- Laghaeia M., Baghbanana A., Hashemolhosseinib H. and Dehghanipoodeha M., 2018, Numerical determination of deformability and strength of 3D fractured rock mass, Int. J. Rock Mech. Min. Sci., 110, 246-256. https://doi.org/10.1016/j.ijrmms.2018.07.015
- Lei Q, Latham J.P. and Tsang C.F., 2017, The use of discrete fracture networks for modelling coupled geomechanical and hydrological behaviour of fractured rocks, Computers and Geotechnics 85, 151-176. https://doi.org/10.1016/j.compgeo.2016.12.024
- Li X. and Li X.S., 2009, Micro-macro quantification of the internal structure of granular materials. J. Eng. Mech., ASCE., 135, 641-656. https://doi.org/10.1061/(ASCE)0733-9399(2009)135:7(641)
- Min KB. and Jing L. 2003, Numerical determination of the equivalent elastic compliance tensor for fractured rock masses using the distinct element method, Int. J. Rock Mech. Min. Sci. 40, 795-816. https://doi.org/10.1016/S1365-1609(03)00038-8
- Min K.B. and Thoraval A., 2012, Comparison of two- and three-dimensional approaches for the numerical determination of equivalent mechanical properties of fractured rock masses, Tunnel and Underground Space, 22, 92-105.
- Oda, M., 1982, Fabric tensor for discontinuous geologic materials, Soils and Foundations, 22, 96-108. https://doi.org/10.3208/sandf1972.22.4_96
- Rothenburg L. and Bathurst R.J., 1992, Micromechanical features of granular assemblies with planar elliptical particles, Geotechnique, 42, 79-95. https://doi.org/10.1680/geot.1992.42.1.79
- Ryu S.J. and Um J.G., 2020, Effect of joint geometry on anisotropic deformability of jointed rock masses, Econ. Environ. Geol., 53, 271-285. https://doi.org/10.9719/EEG.2020.53.3.271
- Ryu S.J., Um J.G. and Park J.Y., 2020, Estimation of strength and deformation modulus of the 3-D DFN system using the distinct element method, Tunnel and Underground Space, 30, 15-28. https://doi.org/10.7474/TUS.2020.30.1.015
- Satake M., 1982, Fabric tensor in granular materials. in Vermeer P.A. and Luger H.J. (eds.), Proc. IUTAM Symp. on Deformation and Failure of Granular Materials, A.A. Balkema, Rotterdam, 63-68.
- Um J.G. and Han J.S., 2017, Analysis of relationship between 2-D fabric tensor parameters and hydraulic properties of fractured rock mass, Tunnel and Underground Space, 27, 100-108. https://doi.org/10.7474/TUS.2017.27.2.100
- Wang S. and Kulatilake P.H.S.W., 1993, Linking between joint geometry models and a distinct element method in three dimensions to perform stress analyses in rock masses containing finite size joints, Jpn. Soc Soil Mech. and Found Eng., 33, 88-98.