DOI QR코드

DOI QR Code

Seismic fragility analysis of wood frame building in hilly region

  • 투고 : 2020.03.25
  • 심사 : 2020.06.10
  • 발행 : 2021.01.25

초록

A comprehensive study on seismic performance of wood frame building in hilly regions is presented. Specifically, seismic fragility assessment of a typical wood frame building at various locations of the northeast region of India are demonstrated. A three-dimensional simplified model of the wood frame building is developed with due consideration to nonlinear behaviour of shear walls under lateral loads. In doing so, a trilinear model having improved capability to capture the force-deformation behaviour of shear walls including the strength degradation at higher deformations is proposed. The improved capability of the proposed model to capture the force-deformation behaviour of shear wall is validated by comparing with the existing experimental results. The structural demand values are obtained from nonlinear time history analysis (NLTHA) of the three-dimensional wood frame model considering the effect of uncertainty due to record to record variation of ground motions and structural parameters as well. The ground motion bins necessary for NLTHA are prepared based on the identified hazard level from probabilistic seismic hazard analysis of the considered locations. The maximum likelihood estimates of the lognormal fragility parameters are obtained from the observed failure cases and the seismic fragilities corresponding to different locations are estimated accordingly. The results of the numerical study show that the wood frame constructions commonly found in the region are likely to suffer minor cracking or damage in the shear walls under the earthquake occurrence corresponding to the estimated seismic hazard level; however, poses negligible risk against complete collapse of such structures.

키워드

참고문헌

  1. Altunisik, A.C. (2017), "Shaking table test of wooden building models for structural identification", Earthq. Struct., 12(1), 67-77. https://doi.org/10.12989/eas.2017.12.1.067.
  2. Anderson, E.N., Leichti, R.J., Sutt, E.G. and Rosowsky, D.V. (2007), "Sheathing nail bending-yield stress: effect on cyclic performance of wood shear walls", Wood Fiber Sci., 39(4), 536-547.
  3. ASTM (2010), Standard test methods for cyclic (reversed) load test for shear resistance of vertical elements of the lateral force resisting systems for buildings. E2126-10, West Conshohocken, PA.
  4. Ayoub, A. (2007), "Seismic analysis of wood building structures", Eng. Struct., 29(2), 213-223. https://doi.org/10.1016/j.engstruct.2006.04.011.
  5. Azizsoltani, H. and Haldar, A. (2020), "Intelligent computational schemes for designing more seismic damage-tolerant structures", J. Earthq. Eng., 24(2), 175-202. https://doi.org/10.1080/13632469.2017.1401566.
  6. Azizsoltani, H., Gaxiola-Camacho, J.R. and Haldar, A. (2018), "Site-specific seismic design of damage tolerant structural systems using a novel concept", Bull. Earthq. Eng., 16(9), 3819-3843. https://doi.org/10.1007/s10518-018-0329-5.
  7. Boore, D.M. (2003), "Simulation of ground motion using the stochastic method", Pure Appl. Geophy., 160(3-4), 635-676. https://doi.org/10.1007/PL00012553.
  8. Cornell, C.A. and Krawinkler, H. (2000), "Progress and challenges in seismic performance assessment", PEER Center News, 3(2), 1-3.
  9. Dolan, J.D. and Madsen, B. (1992), "Monotonic and cyclic nail connection tests", Canadian J. Civil Eng., 19(1), 97-104. https://doi.org/10.1139/l92-010.
  10. Durham, J., Lam, F. and Prion, H.G.L. (2001), "Seismic resistance of wood shear walls with large OSB panels", J. Struct. Eng., 127(12), 1460-1466. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:12(1460).
  11. Falk, R.H. and Itani, R.Y. (1987), "Dynamic characteristics of wood and gypsum diaphragms", J. Struct. Eng., 113(6), 1357-1370. https://doi.org/10.1061/(ASCE)0733-9445(1987)113:6(1357).
  12. FEMA356 (2000), Prestandard and commentary for the seismic rehabilitation of buildings, Rep. No. 356, Federal Emergency Management Agency, Washington D.C.
  13. Fischer, D. and Folz, B. (2001), "Shake table tests of a two-story wood frame house", CUREE Publication No. W-06, University of California, San Diego.
  14. Folz, B. and Filiatrault, A. (2001), "Cyclic analysis of wood shear walls", J. Struct. Eng., 127(4), 433-441. https://doi.org/10.1061/(ASCE)0733-9445(2001)127:4(433).
  15. Folz, B. and Filiatrault, A. (2004), "Simplified seismic analysis of wood frame structures", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada.
  16. Gasparini, D. and Vanmarcke, E.H. (1976), SIMQKE: A program for artificial motion generation, Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, MA.
  17. Gatto, K. and Uang, C. (2003), "Effects of loading protocol on the cyclic response of wood frame shearwalls", J. Struct. Eng., 129(1), 1384-1393. https://doi.org/10.1061/(ASCE)0733-9445(2003)129:10(1384).
  18. Gaxiola-Camacho, J.R., Azizsoltani, H., Villegas-Mercado, F.J. and Haldar, A. (2017), "A novel reliability technique for implementation of performance-based seismic design of structures", Eng. Struct., 142, 137-147. https://doi.org/10.1016/j.engstruct.2017.03.076.
  19. Ghosh, S. and Chakraborty, S. (2017a), "Probabilistic seismic hazard analysis and synthetic ground motion generation for seismic risk assessment of structures in the northeast india", Int. J. Geotech. Earthq. Eng., 8(2), 39-59. http://10.4018/IJGEE.2017070103.
  20. Ghosh, S. and Chakraborty, S. (2017b), "Seismic performance of reinforced concrete building in Guwahati city, northeast India", Scientia Iranica, 24(4), 1821-1833. https://dx.doi.org/10.24200/sci.2017.4273.
  21. Ghosh, S., Ghosh, S. and Chakraborty, S. (2017), "", Int. J. Advan. Eng. Sci. Appl. Mathem., 1-14. https://doi.org/10.1007/s12572-017-0200-y.
  22. Gu, J. (2016a), "Using numerical procedures to quantify seismic reliability of wood shear walls and braced frames", Advan. Struct. Eng., 19(9), 1472-1483. https://doi.org/10.1177%2F1369433216642079. https://doi.org/10.1177%2F1369433216642079
  23. Gu, J. (2016b), "Sensitivity analysis of probabilistic seismic behaviour of wood frame buildings", Earthq. Struct., 11(1), 109-127. https://doi.org/10.12989/eas.2016.11.1.109.
  24. Haldar, A. and Mahadevan, S. (2000), Reliability Assessment Using Stochastic Finite Element Analysis, John Wiley and Sons, NY.
  25. IS1893 (2002), Indian standard criteria for earthquake resistant design of structures. Part 1 - General Provisions and Buildings, Bureau of Indian Standards; New Delhi, India.
  26. IS883 (1994), Design of structural timber. Building-Code of Practice, Bureau of Indian Standards; New Delhi, India.
  27. Koliou, M. and Filiatrault, A. (2017). "Development of wood and steel diaphragm hysteretic connector database for performancebased earthquake engineering", Bull. Earthq. Eng., 15(10), 4319-4347. https://doi.org/10.1007/s10518-017-0141-7.
  28. Li, Y., Yin, Y., Ellingwood, B.R. and Bulleit, W.M. (2010), "Uniform hazard versus uniform risk bases for performance-based earthquake engineering of light-frame wood construction", Earthq. Eng. Struct. Dyn., 39(11), 1199-1217. https://doi.org/10.1002/eqe.989.
  29. Li, Z., He, M., Li, M. and Lam, F. (2014), "Damage assessment and performance-based seismic design of timber-steel hybrid shear wall systems", Earthq. Struct., 7(1), 101-117. https://doi.org/10.12989/eas.2014.7.1.101.
  30. Lu, D., Yu, X., Jia, M. and Wang, G. (2014), "Seismic risk assessment for a reinforced concrete frame designed according to Chinese codes", Struct. Infrastruct. Eng., 10(10), 1295-1310. https://doi.org/10.1080/15732479.2013.791326.
  31. Mandal, T.K., Ghosh, S. and Pujari, N.N. (2016), "Seismic fragility analysis of a typical Indian PHWR containment: comparison of fragility models", Struct. Safety, 58, 11-19. https://doi.org/10.1016/j.strusafe.2015.08.003.
  32. McKenna, F. (2011), "OpenSees: A framework for earthquake engineering simulation", Comput. Sci. Eng., 13(4), 58-66. https://doi.org/10.1109/MCSE.2011.66.
  33. Mercado, F.J.V., Azizsoltani, H., Gaxiola-Camacho, J.R. and Haldar, A. (2017), "Seismic reliability evaluation of structural systems for different soil conditions", Int. J. Geotech. Earthq. Eng. (IJGEE), 8(2), 23-38. http://10.4018/IJGEE.2017070102.
  34. Moustafa, A. and Mahadevan, S. (2011), "Reliability analysis of uncertain structures using earthquake response spectra", Earthq. Struct., 2(3), 279-295. https://doi.org/10.12989/eas.2011.2.3.279
  35. Olsson, A.M.J. and Sandberg, G.E. (2002), "Latin hypercube sampling for stochastic finite element analysis", J. Eng. Mech., 128(1), 121-125. https://doi.org/10.1061/(ASCE)0733-9399(2002)128:1(121).
  36. Pang, W., Rosowsky, D.V., Ellingwood, B.R. and Wang, Y. (2009), "Seismic fragility analysis and retrofit of conventional residential wood-frame structures in the central United States", J. Struct. Eng., 135(3), 262-271. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:3(262).
  37. Peterson, J. (1983), "Bibliography on lumber and wood panel diaphragms", J. Struc. Eng., 109(12), 2838-2852. https://doi.org/10.1061/(ASCE)0733-9445(1983)109:12(2838).
  38. Philips, T.L., Itani, R.Y. and McLean, D.I. (1993), "Lateral load sharing by diaphragms in wood-frame buildings", J. Struct. Eng., 119(5), 1556-1571. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:5(1556).
  39. Rosowsky, D.V. and Ellingwood, B.R. (2002), "Performancebased engineering of wood frame housing: fragility analysis methodology", J. Struct. Eng., 128, 32-38. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:1(32).
  40. Seaders, P., Miller, T.H. and Gupta, R. (2009), "Performance of partially and fully anchored wood-frame shear walls under earthquake loads", Forest Products J., 59(5), 42-52. https://ir.library.oregonstate.edu/concern/graduate_thesis_or_dissertations/6t053j193.
  41. Seim, W., Kramar, M., Pazlar, T. and Vogt, T. (2015), "OSB and GFB as sheathing materials for timber-framed shear walls: Comparative study of seismic resistance", J. Struct. Eng., 142(4), E4015004-1-14. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001293.
  42. Shinozuka, M., Feng, M.Q., Lee, J. and Naganuma, T. (2000), "Statistical analysis of fragility curves", J. Eng. Mech., 126(12), 1224-1231. https://doi.org/10.1061/(ASCE)0733-9399(2000)126:12(1224).
  43. Sinha, A. and Gupta, R. (2009), "Strain distribution in OSB and GWB in wood-frame shear walls", J. Struct. Eng., 135(6), 666-675. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:6(666).
  44. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  45. Van de Lindt, J.W. (2005), "Damage-based seismic reliability concept for wood frame structures", J. Struct. Eng., 131(4), 668-675. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:4(668).
  46. Van de Lindt, J.W., Symans, M., Pang, W., Shao, X. and Gershfeld, M. (2012), "The NEES-soft project: Seismic risk reduction for soft-story wood frame buildings", Proceedings of the 15th World Conference on Earthquake Engineering, Lisbon, Portugal.
  47. Xu, J. and Dolan, J.D. (2009a). "Development of a wood-frame shear wall model in ABAQUS", J. Struct. Eng., 135(8), 977-984. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000031.
  48. Xu, J. and Dolan, J.D. (2009b), "Development of nailed wood joint element in ABAQUS", J. Struct. Eng., 135(8), 968-976. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000030.
  49. Zhang, X. and Tannert, T. (2018), "Seismic reliability analysis of a timber steel hybrid system", Eng. Struct., 167, 629-638. https://doi.org/10.1016/j.engstruct.2018.04.051.