DOI QR코드

DOI QR Code

Seismic fragility analysis of RC frame-core wall buildings under the combined vertical and horizontal ground motions

  • Taslimi, Arsam (Department of Civil and Environment Engineering, University of Nevada) ;
  • Tehranizadeh, Mohsen (Department of Civil and Environment Engineering, Amirkabir University of Technology) ;
  • Shamlu, Mohammadreza (Department of Civil and Environment Engineering, Amirkabir University of Technology)
  • 투고 : 2020.08.02
  • 심사 : 2021.02.04
  • 발행 : 2021.02.25

초록

This study strives to highlight the importance of considering the vertical ground motions (VGM) in the seismic evaluation of RC buildings. To this aim, IDA (Incremental Dynamic Analysis) is conducted on three code-based designed high-rise RC frame-core wall buildings using a suite of earthquake records comprising of significant VGMs. To unravel the significance of the VGM inclusion on the performance of the buildings, IDAs are conducted in two states (with and without the vertical component), and subsequently based on each analysis, fragility curves are developed. Non-simulated collapse criteria are used to determine the collapse state drift ratio and the area under the velocity spectrum (SIm) is taken into account as the intensity measure. The outcome of this study delineates that the inclusion of VGM leads to the increase in the collapse vulnerability of the structures as well as to the change in the pattern of inter-story drifts and failure mode of the buildings. The results suggested that it would be more conservative if the VGM is included in the seismic assessment and the fragility analysis of RC buildings.

키워드

참고문헌

  1. ACI 318 (2014), Building Code Requirements for Structural Concrete and Commentary, American Concrete Institute, Farmington Hills, US..A.
  2. Ahmadi, G. and Mostaghel, N. (1980), "Stability and upper bound to the response of tall structures to earthquake support motion", J. Struct. Mech., 8(2), 151-159. https://doi.org/10.1080/03601218008907357.
  3. Alaghebandian, R. (1998), "Non-linear response of R/C framed buildings subjected to horizontal and vertical seismic motion", Proceedings of the at the Annual Meeting of AIJ.
  4. Ansari, M., Ansari, M. and Safiey, A. (2018), "Evaluation of seismic performance of mid-rise reinforced concrete frames subjected to far-field and near-field ground motions", Earthq. Struct., 15(5). https://doi.org/10.12989/eas.2018.15.5.453.
  5. ASCE 7 (2016), Minimum Design Loads for Buildings and Other Structures, American Society of Civil Engineers; Reston, Virginia, U.S.A.
  6. ATC 72 (2010), Modeling and Acceptance Criteria for Seismic Design and Analysis of Tall Buildings, Applied Technology Council; Redwood City, U.S.A.
  7. Baker, J.W. and Allin Cornell, C. (2005), "A vector‐valued ground motion intensity measure consisting of spectral acceleration and epsilon", Earthq. Eng. Struct. Dyn., 34(10), 1193-1217. https://doi.org/10.1002/eqe.474.
  8. Bovo, M. and Savoia, M. (2019), "Evaluation of force fluctuations induced by vertical seismic component on reinforced concrete precast structures", Eng. Struct., 178, 70-87. https://doi.org/10.1016/j.engstruct.2018.10.018.
  9. Collier, C. and Elnashai, A.S. (2001), "A procedure for combining vertical and horizontal seismic action effects", J. Earthq. Eng., 5(04), 521-539. https://doi.org/10.1080/13632460109350404
  10. Cordova, P.P., Deierlein, G.G., Mehanny, S.S. and Cornell, C.A. (2000), "Development of a two-parameter seismic intensity measure and probabilistic assessment procedure", Proceedings of the second US-Japan Workshop on Performance-based Earthquake Engineering Methodology for Reinforced Concrete Building Structures, September.
  11. Dabaghi, M., Saad, G. and Allhassania, N. (2019), "Seismic collapse fragility analysis of reinforced concrete shear wall buildings", Earthq. Spectra, 35(1), 383-404. https://doi.org/10.1193%2F121717EQS259M. https://doi.org/10.1193%2F121717EQS259M
  12. Dana, M., Cussen, A., Chen, Y., Davis, C., Greer, M., Houston, J. and Roufegarinejad, A. (2014), "Effects of the seismic vertical component on structural behavior-an analytical study of current code practices and potential areas of improvement", Proceedings of the Tenth US National Conference on Earthquake Engineering. Anchorage, Alaska, July.
  13. DeBock, D.J., Liel, A.B., Haselton, C.B., Hooper, J.D. and Henige Jr, R.A. (2014), "Importance of seismic design accidental torsion requirements for building collapse capacity", Earthq. Eng. Struct. Dyn., 43(6), 831-850. https://doi.org/10.1002/eqe.2375.
  14. Di Sarno, L., Elnashai, A.S. and Manfredi, G. (2011), "Assessment of RC columns subjected to horizontal and vertical ground motions recorded during the 2009 L'Aquila (Italy) earthquake", Eng. Struct., 33(5), 1514-1535. https://doi.org/10.1016/j.engstruct.2011.01.023.
  15. Ebrahimi, S. (2016), Effect of Vertical Component of Ground Motion on Dual System Tall Buildings, Master's Thesis, UC Irvine.
  16. Farsangi, E.N., Tasnimi, A.A. and Mansouri, B. (2015), "Fragility assessment of RC-MRFs under concurrent vertical-horizontal seismic action effects", Comput. Concrete, 16(1), 99-123. https://doi.org/10.12989/cac.2015.16.1.099.
  17. FEMA 356 (2000), Commentary for the Seismic Rehabilitation of Buildings, Federal Emergency Management Agency, Washington, D.C., U.S.A.
  18. FEMA P695 (2009), Quantification of Building Seismic Performance Factors, Federal Emergency Management Agency, Washington, D.C., U.S.A.
  19. Harrington, C.C. and Liel, A.B. (2016), "Collapse assessment of moment frame buildings, considering vertical ground shaking", Earthq. Eng. Struct. Dyn., 45(15), 2475-2493. https://doi.org/10.1002/eqe.2776.
  20. Haselton, C.B. (2008), Beam-column element model calibrated for predicting flexural response leading to global collapse of RC frame buildings, Pacific Earthquake Engineering Research Center.
  21. Haselton, C.B., Liel, A.B., Deierlein, G.G., Dean, B.S. and Chou, J.H. (2011), "Seismic collapse safety of reinforced concrete buildings. I: Assessment of ductile moment frames", J. Struct. Eng., 137(4), 481-491. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000318.
  22. Haselton, C.B., Liel, A.B., Taylor-Lange, S.C. and Deierlein, G.G. (2016), "Calibration of model to simulate response of reinforced concrete beam-columns to collapse", ACI Struct. J., 113(6). 1141-1152. https://doi.org/10.14359/51689245
  23. Ibarra, L.F. and Krawinkler, H. (2004), "Global collapse of deteriorating MDOF systems", Proceedings of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, August.
  24. Ibarra, L.F., Medina, R.A. and Krawinkler, H. (2005), "Hysteretic models that incorporate strength and stiffness deterioration", Earthq. Eng. Struct. Dyn., 34(12), 1489-1511. https://doi.org/10.1002/eqe.495.
  25. Iyengar, R. and Shinozuka, M. (1972), "Effect of self‐weight and vertical acceleration on the behaviour of tall structures during earthquake", Earthq. Eng. Struct. Dyn., 1(1), 69-78. https://doi.org/10.1002/eqe.4290010107.
  26. Ji, J., Elnashai, A.S. and Kuchma, D. (2007), "Seismic fragility assessment for reinforced concrete high-rise buildings", MAE Center CD Release, 7-14.
  27. Jiwei, W., Dajun, D. and Di, Z. (1994), "A study of earthquake response in a 15‐story reinforced‐concrete frame‐tube model in a shaking table test", Struct. Des. Tall Build., 3(3), 201-214. https://doi.org/10.1002/tal.4320030305.
  28. Ju, S.H., Liu, C. and Wu, K. (2000), "3D Analyses of buildings under vertical component of earthquakes", J. Struct. Eng., 126(10), 1196-1202. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:10(1196).
  29. Kadid, A., Yahiaoui, D. and Chebili, R. (2010), "Behaviour of reinforced concrete buildings under simultaneous horizontal and vertical ground motions", Asian J. Civil Eng. (Build. Housing), 11(4), 463-476.
  30. Katsanos, E.I., Sextos, A.G. and Manolis, G.D. (2010), "Selection of earthquake ground motion records: A state-of-the-art review from a structural engineering perspective", Soil Dyn. Earthq. Eng., 30(4), 157-169. https://doi.org/10.1016/j.soildyn.2009.10.005.
  31. Kavand, A. and Yazdi, M. (2019), "Kinematic interaction of pile groups with liquefied soil during lateral spreading based on 1 g shake table tests", Proceedings of the 7th International Conference on Earthquake Geotechnical Engineering, 3218-3225. Roma, June.
  32. Kim, S., Kim, S.J. and Chang, C. (2018), "Analytical assessment of the effect of vertical ground motion on RC frames designed for gravity loads with various geometric configurations", Advan. Civil Eng., 2018. https://doi.org/10.1155/2018/4029142.
  33. Kim, S.J. and Elnashai, A.S. (2008), "Seismic assessment of RC structures considering vertical ground motion", Research Report No. 08-03, University of Illinois at Urbana-Champaign.
  34. Kostinakis, K.G. and Athanatopoulou, A.M. (2015), "Evaluation of scalar structure-specific ground motion intensity measures for seismic response prediction of earthquake resistant 3D buildings", Earthq. Struct., 9(5), 1091-1114. http://dx.doi.org/10.12989/eas.2015.9.5.1091.
  35. Lee, H. and Mosalam, K. (2014), "Effect of vertical acceleration on shear strength of reinforced concrete columns", Research Report No. PEER 2014/04; University of California, Berkeley.
  36. Liel, A.B., Haselton, C.B. and Deierlein, G.G. (2011), "Seismic collapse safety of reinforced concrete buildings. II: Comparative assessment of nonductile and ductile moment frames", J. Struct. Eng., 137(4), 492-502. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000275.
  37. Lu, X., Lu, X., Guan, H. and Ye, L. (2013), "Collapse simulation of reinforced concrete high‐rise building induced by extreme earthquakes", Earthq. Eng. Struct. Dyn., 42(5), 705-723. https://doi.org/10.1002/eqe.2240.
  38. Lu, X., Tian, Y., Cen, S., Guan, H., Xie, L. and Wang, L. (2018), "A high-performance quadrilateral flat shell element for seismic collapse simulation of tall buildings and its implementation in OpenSees", J. Earthq. Eng., 22(9), 1662-1682. https://doi.org/10.1080/13632469.2017.1297269.
  39. Luco, N. and Cornell, C.A. (2007), "Structure-specific scalar intensity measures for near-source and ordinary earthquake ground motions", Earthq. Spectra, 23(2), 357-392. https://doi.org/10.1193%2F1.2723158. https://doi.org/10.1193%2F1.2723158
  40. Matsumura, K. (1992), "On the intensity measure of strong motions related to structural failures", Proceedings of the 10th World Conference on Earthquake Engineering, Balkema, Rotterdam.
  41. Mazza, F. and Mazza, M. (2012), "Nonlinear modeling and analysis of rc framed buildings located in a near-fault area", Open Construct. Build. Technol. J., 6(2), 346-354. http://dx.doi.org/10.2174/1874836801206010346.
  42. McKenna, F., Fenves, G.L. and Scott, M.H. (2000), "Open system for earthquake engineering simulation", University of California, Berkeley, U.S.A.
  43. Mehrain, M. and Naeim, F. (2003), "Exact three-dimensional linear and nonlinear seismic analysis of structures with twodimensional models", Earthq. Spectra, 19(4), 897-912. https://doi.org/10.1193%2F1.1623498. https://doi.org/10.1193%2F1.1623498
  44. Miao, Z., Ye, L., Guan, H. and Lu, X. (2011), "Evaluation of modal and traditional pushover analyses in frame-shear-wall structures", Advan. Struct. Eng., 14(5), 815-836. https://doi.org/10.1260/1369-4332.14.5.815.
  45. Moniri, H. (2017), "Evaluation of seismic performance of reinforced concrete (RC) buildings under near-field earthquakes", Int. J. Advan. Struct. Eng., 9(1), 13-25. https://doi.org/10.1007/s40091-016-0145-6
  46. Mostaghel, N. (1974), "Stability of columns subjected to earthquake support motion", Earthq. Eng. Struct. Dyn., 3(4), 347-352. https://doi.org/10.1002/eqe.4290030405.
  47. MSC. Software Corp (2005), MSC. Marc Volume D: User Subroutines and Special Routines.
  48. Munshi, J.A. and Ghosh, S.K. (1998), "Analyses of seismic performance of a code designed reinforced concrete building", Eng. Struct., 20(7), 608-616. https://doi.org/10.1016/S0141-0296(97)00055-2.
  49. Mwafy, A. and Elnashai, A. (2006), "Vulnerability of codecompliant RC buildings under multi-axial earthquake loading", Proceedings of the 4th International Conference on Earthquake Engineering, Taipei, October.
  50. Nagashree, B., Ravi, K. and Venkat, R.D. (2016), "A parametric study on seismic fragility analysis of RC buildings", Earthq. Struct., 10(3), 629-643. https://doi.org/10.12989/eas.2016.10.3.629.
  51. Nazari, Y.R. and Saatcioglu, M. (2017), "Seismic vulnerability assessment of concrete shear wall buildings through fragility analysis", J. Build. Eng., 12, 202-209. https://doi.org/10.1016/j.jobe.2017.06.006.
  52. NIST (2010), Guidelines for Nonlinear Structural Analysis for Design of Buildings, National Institute of Standards and Technology; Gaithersburg, U.S.A.
  53. NIST (2017), Evaluation of the FEMA P-695 Methodology for Quantification of Building Seismic Performance Factors, National Institute of Standards and Technology, Gaithersburg, U.S.A.
  54. Pejovic, J.R., Serdar, N.N. and Pejovic, R.R. (2017), "Optimal intensity measures for probabilistic seismic demand models of RC high-rise buildings", Earthq. Struct., 13(3), 221-230. http://dx.doi.org/10.12989/eas.2017.13.3.221.
  55. Pejovic, J.R., Serdar, N.N. and Pejovic, R.R. (2018), "Novel optimal intensity measures for probabilistic seismic analysis of RC high-rise buildings with core", Earthq. Struct., 15(4), 443-452. http://dx.doi.org/10.12989/eas.2018.15.4.443.
  56. Rajeev, P. and Tesfamariam, S. (2012), "Seismic fragilities of nonductile reinforced concrete frames with consideration of soil structure interaction", Soil Dyn. Earthq. Eng., 40, 78-86. https://doi.org/10.1016/j.soildyn.2012.04.008.
  57. Ruiz-Garcia, J. (2018), "Examination of the vertical earthquake ground motion component during the September 19, 2017 (Mw=7.1) earthquake in Mexico City", Soil Dyn. Earthq. Eng., 110, 13-17. https://doi.org/10.1016/j.soildyn.2018.03.029.
  58. Safaei, S., Taslimi, A. and Tehrani, P. (2019), "A study on the accuracy of force analogy method in nonlinear static analysis", Struct. Des. Tall Special Build., 28(13), e1654. https://doi.org/10.1002/tal.1654.
  59. Shome, N., Cornell, C.A., Bazzurro, P. and Carballo, J.E. (1998), "Earthquakes, records, and nonlinear responses", Earthq. Spectra, 14(3), 469-500. https://doi.org/10.1193%2F1.1586011. https://doi.org/10.1193%2F1.1586011
  60. Shrestha, B. (2009), Vertical ground motions and its effect on engineering structures: A state-of-the-art review. Proceeding of International Seminar on Hazard Management for Sustainable Development, Kathmandu, Nepal, November
  61. Stafford Smith, B. and Cruvellier, M. (1990), "Planar modeling techniques for asymmetric building structures", Proceedings of the Institution of Civil Engineers, 89(1), 1-14. https://doi.org/10.1680/iicep.1990.5248.
  62. Stewart, J.P., Chiou, S.J., Bray, J.D., Graves, R.W., Somerville, P. G. and Abrahamson, N.A. (2002), "Ground motion evaluation procedures for performance-based design", Soil Dyn. Earthq. Eng., 22(9-12), 765-772. https://doi.org/10.1016/S0267-7261(02)00097-0.
  63. TBI (2017), Tall Buildings Initiative, Guidelines for the Performance-Based Seismic Design of Tall Buildings, Report No. PEER 2017/06, Pacific Earthquake Engineering Research Center; University of California, Berkeley, U.S.A.
  64. Tehranizadeh, M., Shamlu, M. and Taslimi, A. (2019a), A simplified method to conform 3D symmetric RC core walls to equivalent planar systems, Proceeding of the 11th National Congress on Civil Engineering, Shiraz University, Shiraz, Iran, April.
  65. Tehranizadeh, M., Taslimi, A. and Shamlu, M. (2019b), The effect of vertical excitations on the collapse risk assessment of RC frame-core wall structures, Proceeding of the 8th International Conference on Seismology and Earthquake Engineering, Tehran, Iran, November.
  66. Tehranizadeh, M., Taslimi, A. and Shamlu, M. (2019c), Sensitivity analysis of different shell elements for RC shear walls, Proceeding of the 11th National Congress on Civil Engineering, Shiraz University, Shiraz, Iran, April.
  67. Thomsen, J.H. and Wallace, J.W. (1995), Displacement-based design of RC structural walls: an experimental investigation of walls with rectangular and T-shaped cross-sections, Clarkson University, U.S.A.
  68. Tyvand, H. (2012), "Modeling of buildings to simulate the effects of vertical components of ground motion", University of Oslo, Oslo.
  69. Vamvatsikos, D. and Cornell, C.A. (2002), "Incremental dynamic analysis", Earthq. Eng. Struct. Dyn., 31(3), 491-514. https://doi.org/10.1002/eqe.141.
  70. Vamvatsikos, D. and Cornell, C.A. (2005), "Developing efficient scalar and vector intensity measures for IDA capacity estimation by incorporating elastic spectral shape information", Earthq. Eng. Struct. Dyn., 34(13), 1573-1600. https://doi.org/10.1002/eqe.496.
  71. Villaverde, R. (2007), "Methods to assess the seismic collapse capacity of building structures: State of the art", J. Struct. Eng., 133(1), 57-66. https://doi.org/10.1061/(ASCE)0733-9445(2007)133:1(57).
  72. Wu, Y.T., Zhou, Q., Wang, B., Yang, Y.B. and Lan, T.Q. (2018), "Seismic collapse safety of high-rise RC moment frames supported on two ground levels", Earthq. Struct., 14(4), 349-360. https://doi.org/10.12989/eas.2018.14.4.349.
  73. Yahyaabadi, A. and Tehranizadeh, M. (2011), "New scalar intensity measure for near-fault ground motions based on the optimal combination of spectral responses", Scientia Iranica, 18(6), 1149-1158. https://doi.org/10.1016/j.scient.2011.09.013.
  74. Yahyaabadi, A. and Tehranizadeh, M. (2012), "Development of an improved intensity measure in order to reduce the variability in seismic demands under near-fault ground motions", J. Earthq. Tsunami, 6(02), 1250012. https://doi.org/10.1142/S1793431112500121.
  75. Yu, J. and Liu, X. (2016), "The influence of vertical ground motion on the seismic behavior of RC frame with construction joints", Earthq. Struct., 11(3), 407-420. http://dx.doi.org/10.12989/eas.2016.11.3.407.
  76. Zaker Esteghamati, M., Banazadeh, M. and Huang, Q. (2018), "The effect of design drift limit on the seismic performance of RC dual high‐rise buildings", Struct. Des. Tall Spec. Build., 27(8), e1464. https://doi.org/10.1002/tal.1464.
  77. Zareian, F. and Medina, R.A. (2010), "A practical method for proper modeling of structural damping in inelastic plane structural systems", Comput. Struct., 88(1-2), 45-53. https://doi.org/10.1016/j.compstruc.2009.08.001.

피인용 문헌

  1. Axial compressive performance of steel reinforced fibrous concrete composite stub columns: Experimental and theoretical study vol.34, 2021, https://doi.org/10.1016/j.istruc.2021.08.130
  2. The effect of vertical near-field ground motions on the collapse risk of high-rise reinforced concrete frame-core wall structures vol.25, pp.2, 2022, https://doi.org/10.1177/13694332211056106