Abstract
This study tried to suggest a drafting method to draft tight fit torso patterns suitable for adult males with a sway back somatotype and a bend forward somatotype by setting and distributing the ease through the completion of the somatic surface pattern using the 3D body surface segment method. It was intended to be presented as a drafting method. As for the research method, the suitability of the somatic surface patterns and the tight fit torso patterns were confirmed by the evaluation of virtual wear, and the patterns were modified and supplemented. The research results are as follows. In the first evaluation of the tight fit torso patterns, the average, for 55 evaluation items, was 3.92 points for the sway back somatotype and 3.89 points for the bend forward somatotype. In the second evaluation, the bend forward somatotype was 4.51 points and the sway back somatotype was 4.62 points. The chest circumference ease amount for the bend forward somatotype and the sway back somatotype are 6.5% (6.8 cm) and 7% (6.8 cm) of the chest circumference, respectively, and the distribution of the front and back ease is the same at 4:6 (2.72 cm:4.08 cm). The waist circumference ease amount is 6.5% (5.8cm) and 6.5% (5.6 cm) of the waist circumference dimensions, and the distribution of the front and backease are 5:5 (1.45 cm: 1.45 cm) and 4:6 (2.24 cm: 3.36 cm), respectively. The completed tight fit torso patterns were converted into institutional formulas and presented as a drafting method.