참고문헌
- Seong-Ryeol Han, Jea-Ii Park, Jin-Rea Cho, "Development of plastic passenger air bag (PAB) housing for replacing the steel PAB housing and reducing the automobile weight", Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 40, No. 4, pp. 1-10, 2018. https://doi.org/10.1007/s40430-017-0921-7
- Seong-Ryeol Han, Jin-Rea Cho, Sea-Kwon Beak, Jeong-A Hong, "Numerical and experimental studies on injection compression molding process for thick plastic gas valve stem", International Journal of Advanced Manufacturing Technology, Vol. 89, No. 1-4, pp. 651-660, 2017. https://doi.org/10.1007/s00170-016-9139-6
- Ferenc Szabo, Andra Suplicz, Jozsef Gabor Kovacs, "Development of injection molding simulation algorithms that take into account segregation", Powder Technology, Vol. 389, pp. 368-375, 2021. https://doi.org/10.1016/j.powtec.2021.05.053
- Tae-Soo Kwak, Hitoshi Ohmori "Verification For transcription of spherical and prediction of birefringence in injection molding optical lens", Journal of the Korean Society for Precision Engineering, Vol. 22, No. 6, pp. 55-60, 2005.
- Yoon-Seo Choi, In-Seung Park, Dong-Ho Yang, Byeong-Cheol Ha, Jong-Chan Lee, "A Study on the Characteristics of Plastic Injection Molding Using Core in Core Cooling Technology", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 3, pp. 82-87, 2019.
- Dai-soo Lee, Seong-Geun Kim, Vinh-Khanh Nguyen, Wing-Ji Lee, Su-Jin Pang, "Effects of Mold Temperatures on Physical Properites of Injection Molded Thermoplastic Polyurethanes", Elastomers and composites, Vol. 39, No. 4. pp. 286-293, 2004.
- Jeong-Woo Woo, Jin-Su Hong, Hyun-Ku Kim, Min-Young Lyu, "Analysis of Residual Stress and Birefringence in a Transparent Injection Molded Article for Molding Condition", Polymer, Vol. 40, No. 2, pp. 175-180, 2016. https://doi.org/10.7317/pk.2016.40.2.175
- Jozsef Balint Renko, David Miklos Kemeny, Jozsef Nyiro, Dorina Kovacs, "Comparison of cooling simulations of injection moulding tools created with cutting machining and additive manufacturing", Materials Today: Proceedings, Vol. 12, Part 2, pp. 462-469, 2019. https://doi.org/10.1016/j.matpr.2019.03.150
- Suping Shen, Baris Burak Kanbur, Yi Zhou, Fei Duan, "Thermal and mechanical analysis for conformal cooling channel in plastic injection molding", Materials today: Proceedings Vol. 28, Part 2, pp. 396-401, 2020. https://doi.org/10.1016/j.matpr.2019.10.020
- O. Rashid, K.W.Q. Low, J.F.T. Pittman, "Mold cooling in thermoplastics injection molding: Effectiveness and energy efficiency", Journal of Cleaner Production, Vol. 264, No. 10, pp. 45-49, 2020.
- Singh S. Deepika, Bhushan T. Patil, Vasim A. Shaikh, "Plastic injection molded door handle cooling time reduction investigation using conformal cooling channels", Materials Today: Proceedings, Vol. 27, Part 1, pp. 519-523, 2020. https://doi.org/10.1016/j.matpr.2019.11.316
- Jung-Hyun Lee, Seon-Bong Lee, "Determined Car Door Latch Injection Molding Process Conditions through the Finite Elements Analysis", Journal of the Korean Academia-Industrial Cooperation Society, Vol. 17, No. 10, pp. 499-508, 2016.
- Bambang Waluyo Febriantoko, Agung Setyo Darmawan, Masyrukan, Abdul Hamid, "Post Shrinkage Comparison of Plastic Injection Products by Using Solid Mold, Laminated Steel Tooling Mold, and Soft Tooling Mold", AIP Conf. Proc., 2114, 030009, 2019.