과제정보
This research was supported by the Ministry of Trade, Industry, and Energy Grant funded by the Korean Government [Project Number 20003901].
참고문헌
- B. Rodgers, "Tire Engineering: An Introduction", CRC Press: Boca Raton, FL, USA (2020).
- V. D. Veiga, T. M. Rossignol, J. D. S. Crespo, and L. N. Carli, "Tire tread compounds with reduced rolling resistance and improved wet grip", Journal of Applied Polymer Science 134, 39 (2017).
- S. S. Sarkawi, W. K. Dierkes, and J. W. M. Noordermeer, "Natural Rubber-Silica Combinations for Low Rolling Resistance Truck Tyre Treads", Rubber World 2012, 26 (2012).
- M.-J. Wang, P. Zhang, and K. Mahmud, "Carbon-Silica Dual Phase Filler, a new Generation Reinforcing Agent for Rubber: Part IX. Application to Truck Tire Tread Compound", Rubber Chem. Technol., 74, 1, 124 (2001). https://doi.org/10.5254/1.3547633
- S. S. Sarkawi, W. K. Dierkes, and J. W. M. Noordermeer, "Morphology of silica-reinforced natural rubber: The effect of silane coupling agent", Rubber Chem. Technol., 88, 3, 359 (2015). https://doi.org/10.5254/rct.15.86936
- W. Dierkes, K. Sengloyluan, W. Kaewsakul, J. Noordermeer, K. Sahakaro, and A. Blume, "New Approaches to Increase the Compatibility of Natural Rubber and Silica for Reduction of Rolling Resistance of Truck and Bus Tires", ITEC in Focus: Green Tire 2019, 25 (2019).
- T. Nakazono and A. Matsumoto, "Mechanical properties and thermal aging behavior of styrene-butadiene rubbers vulcanized using liquid diene polymers as the plasticizer", J. Appl. 118, 4, 2314 (2010).
- T. Kataoka, P. B. Zetterlund, and B. Yamada, "Effects of storage and service on tire performance: Oil component content and swelling behavior", Rubber Chem. Technol., 76, 507 (2003). https://doi.org/10.5254/1.3547757
- D. Kim, B. Ahn, K. Kim, J. Y. Lee, I. J. Kim, and W. Kim, "Effects of Molecular Weight of Functionalized Liquid Butadiene Rubber as a Processing Aid on the Properties of SSBR/Silica Compounds", Polymers, 13, 850 (2021). https://doi.org/10.3390/polym13060850
- M. Gruendken, "Liquid rubber for safer and faster tires", Tire technology EXPO 2018, Hannover, Germany (2018).
- K. Ikeda, "Bio Liquid Polymer for Winter Tires", Tire Technology EXPO 2018, Hannover, Germany (2018).
- G. Ryu, D. Kim, S. Song, K. Hwang, B. Ahn, and W. Kim, "Effect of Epoxide Content on the Vulcanizate Structure of Silica-Filled Epoxidized Natural Rubber (ENR) Compounds", Polymers, 13, 1862 (2021). https://doi.org/10.3390/polym13111862
- H. Hsieh and R. P. Quirk, "Anionic polymerization: principles and practical applications", CRC Press (1996).
- Y. Zhao, B. Huang, H. Cong, H. Shao, and A. Du, "Epoxidation of high trans-1,4-polyisoprene and its properties", Journal of Applied Polymer Science, 107, 2986 (2008). https://doi.org/10.1002/app.27394
- C. G. Robertson and C. M. Roland, "Glass transition and interfacial segmental dynamics in polymer-particle composite", Rubber Chemistry and Technology, 81, 506 (2008). https://doi.org/10.5254/1.3548217
- M. G. Abiad, M. T. Carvajal, and O. H. Campanella, "A review on methods and theories to describe the glass transition phenomenon: applications in food and pharmaceutical products", Food Engineering Reviews, 1, 105 (2009). https://doi.org/10.1007/s12393-009-9009-1
- D. Chen, H. Shao, W. Yao, and B. Huang, "Fourier transform infrared spectral analysis of polyisoprene of a different microstructure", International Journal of Polymer Science (2013).
- O. Hayashi, T. Takahashi, H. Kurihara, and H. Ueno, "Monomer unit sequence distribution in partly-epoxidized trans-1, 4-polyisoprene", Polymer Journal, 13, 215 (1981). https://doi.org/10.1295/polymj.13.215
- A. R. Payne and R. E. Whittaker, "Low Strain Dynamic Properties of Filled Rubbers", Rubber Chem. Technol., 44, 440 (1971). https://doi.org/10.5254/1.3547375
- Y. Yue, H. Zhang, Z. Zhang, and Y. Chen, "Polymer-Filler Interaction of Fumed Silica Filled Polydimethylsiloxane Inves-tigated by Bound Rubber", Compos. Sci. Technol., 86, 1 (2013). https://doi.org/10.1016/j.compscitech.2013.06.019
- B. Ahn, N. Kim, K. Kim, I. J. Kim, H. J. Kim, C. H. Kang, J.-Y. Lee, and W. Kim, "Effect of the functional group of silanes on the modification of silica surface and the physical properties of solution styrene-butadiene rubber/silica composites", Compos. Interfaces, 26, 585 (2019). https://doi.org/10.1080/09276440.2018.1514145
- G. Ryu, D. Kim, S. Song, K. Hwang, and W. Kim, "Effect of the Epoxide Contents of Liquid Isoprene Rubber as a Processing Aid on the Properties of Silica-Filled Natural Rubber Compounds", Polymers, 13, 3026 (2021). https://doi.org/10.3390/polym13183026
- J.-Y. Lee, B. Ahn, W. Kim, H. Moon, H.-J. Paik, and W. Kim, "The effect of accelerator contents on the vulcanizate structures of SSBR/silica vulcanizates", Compos. Interfaces, 24, 563 (2017). https://doi.org/10.1080/09276440.2017.1241559
- N. Park, B. Ahn, J.-Y. Lee, W. Kim, H. Moon, and W. Kim, "Effect of organosilane agents on the vulcanizate structure and physical properties of silica-filled solution styrene butadiene rubber compounds", Compos. Interfaces, 25, 259 (2017).
- B. Ahn, N. Park, D. Kim, and W. Kim, "Influence of end-functionalized solution styrene-butadiene rubber on silica-filled vulcanizates with various silica-silane systems", Rubber Chem. Technol., 92, 364 (2019). https://doi.org/10.5254/rct.19.81522
- B. Ahn, J.-Y. Lee, D. Kim, I. J. Kim, S. Han, and W. Kim, "Effects of silane agents and curing temperatures on vulcanizate structures", Rubber Chem. Technol., 93, 414 (2020). https://doi.org/10.5254/rct.19.80445
- I. J. Kim, B. Ahn, D. Kim, H. J. Lee, H. J. Kim, and W. Kim, "Vulcanizate structures and mechanical properties of rubber compounds with silica and carbon black binary filler systems", Rubber Chem. Technol., 94, 339 (2020).
- I. J. Kim, D. Kim, B. Ahn, H. J. Lee, H. J. Kim, and W. Kim, "Vulcanizate Structures of SBR Compounds with Silica and Carbon Black Binary Filler Systems at Different Curing Temperatures", Polymers, 12, 2343 (2020). https://doi.org/10.3390/polym12102343
- I. J. Kim, D. Kim, B. Ahn, H. Lee, H. Kim, and W. Kim, "Vulcanizate Structures of NR Compounds with Silica and Carbon Black Binary Filler Systems at Different Curing Temperatures", Elast. Compos., 56, 20 (2021). https://doi.org/10.7473/EC.2021.56.1.20
- S. Han, D. Kim, S. Kim, J. Kim, D. Mun, K. Morita, and W. Kim, "Effect of Silane and Sulfur Variation on the Vulcanizate Structure of Silica-Filled Styrene-Butadiene Rubber Compounds", Elast. Compos., 56, 32 (2021). https://doi.org/10.7473/EC.2021.56.1.32
- M.-J. Wang, "Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates", Rubber Chem. Technol., 71, 520 (1998). https://doi.org/10.5254/1.3538492
- S. Han, W.-S. Kim, D.-Y. Mun, B. Ahn, and W. Kim, "Effect of coupling agents on the vulcanizate structure of carbon black filled natural rubber", Compos. Interfaces, 27, 355 (2020) https://doi.org/10.1080/09276440.2019.1637197
- S. Maghami, "Silica-Filled Tire Tread Compounds: An Investigation into the Viscoelastic Properties of the Rubber Compounds and Their Relation to Tire Performance", Ph.D. Thesis, University of Twente, Enschede, The Netherlands, (2016).
- K. Suchiva, C. Sirisinha, P. Sae-Oui, and P. Thapthong, "Development of tyre tread compounds for good wet-grip: Effects of rubber type", In Proceedings of the IOP Conference Series: Materials Science and Engineering, Bangkok, Thailand, 17-21 December 2018; Volume 526, doi:10.1088/1757-899x/526/1/012035.
- R. Yang, Y. Song, and Q. Zheng, "Payne effect of silica-filled styrene-butadiene rubber", Polymer, 116, 304 (2017). https://doi.org/10.1016/j.polymer.2017.04.003
- P. Thavamani and A. K. Bhowmick, "Dynamic Mechanical Properties of Hydrogenated Nitrile Rubber: Effect of Cross-Link Density, Curing System, Filler and Resin", J. Mater. Sci., 27, 3243 (1992). https://doi.org/10.1007/BF01116020
- S. Ahankari and K. K. Kar, "Processing of styrene butadiene rubber-carbon black nanocomposites with gradation of crosslink density: Static and dynamic mechanical characterization", Mater. Sci. Eng. A, 491, 454 (2008). https://doi.org/10.1016/j.msea.2008.02.018
- T. Kitamura, D. F. Lawson, K. Morita, and Y. Ozawa, "Anionic Polymerization Initiators and Reduced Hysteresis Products Therefom", U.S. Patent 5,393,721, 28 February 1995.
- V. P. Sierra, J. Wagemann, C. Van De Pol, N. Kendziorra, K. Herzog, C. Recker, and N. Mueller, "Rubber Blend with Improved Rolling Resistance Behavior", U.S. Patent 9,080,042, 14 July 2015.