DOI QR코드

DOI QR Code

A Basic Study to Use Recycled Limestone Powder as a Mixture for Secondary Concrete Products

재활용 석회석 분말을 콘크리트 2차제품 혼합재로 이용하기 위한 기초적 연구

  • Received : 2021.09.12
  • Accepted : 2021.10.19
  • Published : 2021.12.30

Abstract

In this study, as a basic study to use recycled limestone powder as a secondary product mixture for concrete, it was found that the compressive and flexural strengths were equal to or slightly improved compared to Plain up to 10% and 20% of the RLP mixing ratio, but the strength was rather decreased at 30% mixing. As a result of the heat of hydration experiment, as the RLP mixing rate increased, the heat of hydration decreased, and the elapsed time of the maximum heat was also delayed. As a result of the drying shrinkage test, as the fine powder RLP filled the internal pores of the cement mortar, the drying shrinkage decreased as the mixing rate increased. The compressive strength, water absorption rate, and compressive strength after freezing and thawing of the concrete block mixed with RLP 20% all satisfied the group standard criteria of the Korea Concrete Industry Cooperative Federation, confirming the possibility of use as a mixed material.

본 연구에서는 재활용 석회석 분말(Recycled limestone powder, 이하 RLP라 함) 콘크리트2차제품 혼합재로 이용하기 위한 기초적인 연구로 RLP 혼입율 10%, 20%까지 압축 및 휨강도가 Plain에 비하여 동등하거나 다소 증진되는 것으로 나타났지만 30% 혼입에서는 강도가 오히려 저하하는 것으로 나타났으며,수화열 실험결과 RLP혼입율이 증가할수록 수화열은 감소하였고, 최대발열 경과 시간도 지연되는 것으로 나타났다. 건조수축실험결과 미분말인 RLP가 시멘트모르타르 내부공극을 충진시켜줌에 따라 건조수축량은 혼입률이 증가할수록 감소하였다. RLP 20%를 혼입한 콘크리트블록의 압축강도, 흡수율, 동결융해 후 압축강도 모두 한국콘크리트공업협동조합연합회의 단체표준 기준을 모두 만족한 것으로 나타나 혼합재로서 사용가능성을 확인하였다.

Keywords

References

  1. Choi, Y.W., Oh, S.R., Kim, J.H., Kim, K.H. (2013).A study on the quality properties of exposed high fluidity concrete using fly ash and limestone powder, 1(1), 67-75. https://doi.org/10.14190/JRCR.2013.1.1.067
  2. Jo, J.H., Kim, Y.J., Oh, S.R., Choi, Y.W. (2015). The experimental study on mixing and quality properties of quaternary component blended high fluidity concrete with CO2 reduction, Journal of the Korean Recycled Construction Resources Institute, 3(3), 268-275. https://doi.org/10.14190/JRCR.2015.3.3.268
  3. Jung, J.H. (2019). A study on the possibility of using concrete blocks with ready mixed concrete sludge, Journal of KCI, 19(4), 307-312.
  4. Kang, K.M., Hyung, W.G. (2020). Properties of non-sintered cement mortar with high-calcium fly ash, Journal of Korea Society of Waste Management, 37(3), 151-157. https://doi.org/10.9786/kswm.2020.37.3.151
  5. Kim, S.H., Koh, KT., Lee, J.W., Ryu, G.S. (2014). Study on mechanical properties of geopolymer concrete using industrial by-products, Journal of Korea Recycled Construction Resources Institute, 2(1), 52-59. https://doi.org/10.14190/JRCR.2014.2.1.052
  6. Kim, Y.M., Jung, J.H. (2019). Compressive strength characteristice of non-cement composition added limestone powder, Journal of KCI, 19(2), 178-179.
  7. Lee, M.H. (2016). Fundamental properties of mortar and concrete using high calcium fly ash, Journal of the Korean Recycled Construction Resources Institute, 4(3), 284-291. https://doi.org/10.14190/JRCR.2016.4.3.284
  8. Ryu, G.S., Koh, K.T., Lee, J.H. (2013). Strength development and durability of geopolymer mortar using the combined fly ash and blast-furnace slag, Journal of the Korean Recycled Construction Resources Institute, 1(1), 35-41. https://doi.org/10.14190/JRCR.2013.1.1.035
  9. SPC-KCIC0001-0703 (2020). Concrete Blocks for Retaining Wall and Revetment, Federation of Korea Concrete Industry Cooperatives, Korea.
  10. Yoo, S.W. (2013). The present state and prospect of fly ash quality of domestic thermal power plant, Magazine of RCR, 8(2), 8-12. https://doi.org/10.14190/MRCR.2013.8.2.008