DOI QR코드

DOI QR Code

Experimental and numerical investigations of near-field underwater explosions

  • Lee, Seunggyu (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Cho, Junghee (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Lee, Chaemin (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology) ;
  • Cho, Seongpil (Department of Mechanical Engineering, Korea Advanced Institute of Science and Technology)
  • 투고 : 2020.11.03
  • 심사 : 2020.11.13
  • 발행 : 2021.02.10

초록

Near-field underwater explosion (UNDEX) phenomena were investigated by experiments and numerical simulations. The UNDEX experiments were performed in a water tank using a ship-like model. One kilogram of TNT, one of the most widely used military high explosives, was used for the experiments. Numerical simulations were performed under the same conditions as in the experiments using the commercial software LS-DYNA. Underwater pressures, accelerations, velocities, and strains by shock waves were measured at multiple locations. Further, the bubble pulsation period and the whipping deformations of the ship-like model were explored. The experimental results are presented and examined through comparison with the results obtained from widely used empirical equations and numerical simulations.

키워드

과제정보

This work was supported by the Underwater Near-Field Explosion Research Lab funded by the Defense Acquisition Program Administration under Grant UD180001DD. We would like to express our gratitude to Prof. Phill-Seung Lee for his supervision, inspiration, support, and valuable discussions with his instructive comments.

참고문헌

  1. Abebe, D.Y., Jeong, S., Jang, J., Choi, J. and Park, J.U. (2015), "Study on inelastic buckling and residual strength of H-section steel column member", Int. J. Steel Struct., 15, 365-374. https://doi.org/10.1007/s13296-015-6008-3.
  2. Blake, J., Hooton, M., Robinson, P. and Tong, R. (1997), "Collapsing cavities, toroidal bubbles and jet impact", Proc. Math. Phys. Eng. Sci., 355, 537-550. https://doi.org/10.1098/rsta.1997.0023.
  3. Chung, J., Seo, Y. and Shin, Y. (2019), "Dynamic and whipping response of the surface ship subjected to underwater explosion: experiment and simulation", Ships Offshore Struct., 1-12. https://doi.org/10.1080/17445302.2019.1706924.
  4. Cole, R.H. (1948), Underwater Explosions, Princeton Univ. Press. Princeton, NJ, USA.
  5. Costanzo, F.A. (2010), "Underwater explosion phenomena and shock physics", Proceeding of the IMAC-XXVIII, Jacksonville, Florida, USA, February.
  6. Cowper, G.R. and Symonds, P.S. (1957), "Strain-hardening and Strain-rate Effects in the Impact Loading of Cantilever Beams", Technical Report No. 28, Division of Applied Mathematics; Brown University, RI, USA.
  7. De Candia, S., Ojeda, R., Reid, W. and Ratcliffe, M. (2018), "The whipping response of a submerged platform subjected to near-field, non-contact underwater explosions", Report No. DST-Group-RR-0451, Defence Science and Technology Group; Fishermans Bend, VIC, AUS.
  8. Dobrocinski, S. and Flis, L. (2015), "Numerical Simulations of Blast Loads from Near-Field Ground Explosions in Air", Studia Geotech. et Mech., 37(4), 11-18. https://doi.org/10.1515/sgem2015-0040.
  9. Gannon, L. (2019), "Submerged aluminum cylinder response to close-proximity underwater explosions - A comparison of experiment and simulation", J. Impact Eng., 133, 103339. https://doi.org/10.1016/j.ijimpeng.2019.103339.
  10. Jun, H., Mukai, P. and Kim, S. (2018), "Benchmark tests of MITC triangular shell elements", Struct. Eng. Mech., 68(1), 17-38. http://dx.doi.org/10.12989/sem.2018.68.1.017.
  11. Keil, A.H. (1961), "The response of ships to underwater explosions", Transactions of Society of Naval Architects and Marine Engineers, 69, 366-410. New York, N.Y, USA, November.
  12. Kim, D.K., Ng, W.C.K. and Hwang, O. (2018a), "An empirical formulation to predict maximum deformation of blast wall under explosion", Struct. Eng. Mech., 68(2), 237-245. http://dx.doi.org/10.12989/sem.2018.68.2.237.
  13. Kim, S.H., Woo, H., Choi, G.G. and Yoon, K. (2018b), "A new concept for blast hardened bulkheads with attached aluminum foam", Struct. Eng. Mech., 65, 243-250. http://dx.doi.org/10.12989/sem.2018.65.3.243.
  14. Krieger, J.R. and Chahine, G.L. (2005), "Acoustic signals of underwater explosions near surfaces", J. Acoust. Soc. Am., 118(5), 2961-2974. https://doi.org/10.1121/1.2047147.
  15. Lee, C. and Lee, P.S. (2019), "The strain-smoothed MITC3+ shell finite element", Comput. Struct., 223, 106096. https://doi.org/10.1016/j.compstruc.2019.07.005.
  16. Lee, E.L., Hornig, H.C. and Kury, J.W. (1968), "Adiabatic expansion of high explosive detonation products", Report No. UCRL-50422, University of California Radiation Lab, Livermore, CA, USA.
  17. Lee, K.H., Cho, S., Kim, K.T., Kim, J.G. and Lee, P.S. (2015), "Hydroelastic analysis of floating structures with liquid tanks and comparison with experimental tests", Appl. Ocean Res., 52, 167-187. https://doi.org/10.1016/j.apor.2015.06.002.
  18. Lee, K., Kim, T. and Kim, J. (2009), "Local response of W-shaped steel columns under blast loading", Struct. Eng. Mech., 31(1), 25-38. https://doi.org/10.12989/sem.2009.31.1.025.
  19. Lee, Y., Lee, P.S. and Bathe, K.J. (2014), "The MITC3+ shell finite element and its performance", Comput. Struct., 138, 12-23. https://doi.org/10.1016/j.compstruc.2014.02.005.
  20. Livermore Software Technology Corporation (LSTC) (2017), LS‐DYNA Keyword User's Manual-Volume II-Material Models, LSTC, Livermore, California, USA.
  21. Moon, S.J., Kwon, J.I., Park, J.W. and Chung, J.H. (2017), "Assessment on shock pressure acquisition from underwater explosion using uncertainty of measurement", J. Nav. Archit. Ocean Eng., 9(6), 589-597. https://doi.org/10.1016/j.ijnaoe.2017.04.002.
  22. Riley, M. (2010), "Analytical solutions for predicting underwater explosion gas bubble behavior", Technical Memorandum TM 2010-237, Defense Research and Development; Ottawa, Canada.
  23. Reid, W.D. (1996), "The Response of Surface Ships to Underwater Explosions", Report No. DSTO-GD-0109, DSTO Aeronautical and Maritime Research Laboratory; Melbourne Victoria, Austrailia.
  24. Russell, D.M. (1997), "Error measures for comparing transient data: part I: development of a comprehensive error measure", The Proceedings of the 68th Shock and Vibration Symposium, Hunt Valley, MD, USA, November.
  25. Russell, D.M. (1998), "DDG53 Shock trial simulation acceptance criteria", The Proceedings of 69th Shock and Vibration Symposium, St. Paul, MN, USA, October.
  26. Smith M.J. and Lee J.J. (2017), "Ship-like target design for underwater explosion experiments", Scientific Report No. DRDCRDDC-2017-R096, Defense Research and Development Canada; Dartmouth, Nova Scotia, Canada.
  27. Snay, H.G. (1962), "Underwater explosion phenomena: The parameters of migrating bubbles", Technical Report NAVORD 4185, Explosions Research Department; U.S. Naval Ordnance Laboratory, White Oak, MD, USA.
  28. Swisdak, M.M. (1978), "Explosion effects and properties: Part II - explosion effects in water", Technical Report No. NSWC/WOL/TR-76-116, Naval Surface Weapons Center; White Oak, Silver Spring, MD, USA.
  29. Wang, H., Zhu, X., Cheng, Y.S. and Liu, J. (2014), "Experimental and numerical investigation of ship structure subjected to closein underwater shock wave and following gas bubble pulse", Mar. Struct., 39, 90-117. https://doi.org/10.1016/j.marstruc.2014.07.003.
  30. Webster, K. (2007), "Investigation of Close Proximity Underwater Explosion Effects on a Ship-Like Structure Using the Multi-Material Arbitrary Lagrangian Eulerian Finite Element Method", M.Sc. Dissertation, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA.
  31. Yoon, J.S., Cho, S.P., Jiwinangun, R.G. and Lee, P.S. (2014), "Hydroelastic analysis of floating plates with multiple hinge connections in regular waves", Mar. Struct., 36, 65-87. https://doi.org/10.1016/j.marstruc.2014.02.002.
  32. Yoon, J.S. and Lee, P.S. (2017), "Towards hydro-elastoplastic analysis of floating plate structures", J Fluids Struct., 71, 164-182. https://doi.org/10.1016/j.jfluidstructs.2017.03.008.
  33. Zhang, A.M., Wang, S.P., Huang, C. and Wang, B. (2013), "Influences of initial and boundary conditions on underwater explosion bubble dynamics", Eur. J. Mech. B Fluids, 42, 69-91. https://doi.org/10.1016/j.euromechflu.2013.06.008.
  34. Zhang, A.M., Zeng, L.Y., Cheng, X.D., Wang, S.P. and Chen, Y. (2011), "The evaluation method of total damage to ship in underwater explosion", Appl. Ocean Res., 33, 240-251. https://doi.org/10.1016/j.apor.2011.06.002.
  35. Zhang, S., Wang, S.P. and Zhang, A.M. (2016), "Experimental study on the interaction between bubble and free surface using a high-voltage spark generator", Phys. Fluids, 28(3), 032109. https://doi.org/10.1063/1.4944349.
  36. Zhang, Z., Wang, Y., Zhao, H., Qian, H. and Mou, J. (2015), "An experimental study on the dynamic response of a hull girder subjected to near field underwater explosion", Mar. Struct., 44, 43-60. https://doi.org/10.1016/j.marstruc.2015.07.002.