DOI QR코드

DOI QR Code

Study on the mechanical behaviors of timber frame with the simplified column foot joints

  • Yang, Qing-shan (School of Civil Engineering, Chongqing University) ;
  • He, Jun-xiao (Beijing Advanced Innovation Center for Future Urban Design, Beijing University of Civil Engineering and Architecture) ;
  • Wang, Juan (School of Civil Engineering, Beijing Jiaotong University)
  • 투고 : 2020.03.20
  • 심사 : 2020.11.13
  • 발행 : 2021.02.10

초록

Column foot in traditional Chinese timber structures may be subjected to be uplifted due to the lateral load and subsequently reset under the vertical loads. The residual moment of the rocking column foot is the most important parameter representing the mechanical behaviors of column foot, and the simplification of joints is the basis of structural analysis of whole structure. The complicated mechanical behaviors of joint and the modeling of the column foot joint has been undertaken historically based on the experiments and numerical simulation. On the condition of limited application range of those models, a lack of simplified model to represent the mechanical behaviors of joint deserves attentions. There is a great need to undertake theoretical studies to derive the residual moment and make better simplified model of the joint. This paper proposes the residual moment and equivalent simplified model of the rotational stiffness for column foot joint. And, the timber frame is established based on the simplified model, which is verified by solid finite element model. Results show that a mutual agreement on the mechanical behaviors of the timber frame is obtained between the simplified model and the solid finite element model. This study can serve as the references of the structural analysis for the traditional timber structures.

키워드

과제정보

The work was supported by Chongqing Science and Technology Bureau (cstc2018jcyj-yszxX0010) and Beijing Post-Doctoral Foundation(2020-zz-083). The authors would also like to thank the research project funding of the 111 Project of China (Nos. B13002, B18062) and the National Natural Science Foundation of China (No. 51978038).

참고문헌

  1. Branco, J., Piazza, M., and Cruz, P. (2011), "Experimental evaluation of different strengthening techniques of traditional timber connections", Eng. Struct., 33(22), 59-70. http://doi:10.1016/j.engstruct.2011.04.002.
  2. Bulleit, W. M., L. B. Sandberg, M. W. Drewek, and T. L. O'Bryant. (1999), "Behavior and modeling of wood-pegged timber frames", J Struct. Eng, 125(1), 3-9. http://doi:10.1061/(ASCE)0733-9445(1999)125:1(3).
  3. Chen, J.Y., Li, T.Y., Yang, Q.S., Shi, X.W., Zhao, Y.X. (2018), "Degradation laws of hysteretic behavior for historical timber building based on pseudo-static tests", Eng. Struct., 156(2018), 400-489. http://doi:10.1016/j.engstruct.2017.11.054.
  4. Guan, Z.W., Kitamori, A. and Komatsu, K. (2008), "Experimental study and finite element modelling of Japanese 'Nuki' joints-part one: initial stress states subjected to different wedge configurations", Eng. Struct., 30(7), 2032-2040. http://doi:10.1016/j.engstruct.2008.01.003.
  5. Guan, Z.W., Kitamori, A., Komatsu, K. (2008), "Experimental study and finite element modelling of Japanese 'Nuki' joints-part two: racking resistance subjected to different wedge configurations", Eng. Struct., 30(2008), 2041-2049. http://doi:10.1016/j.engstruct.2008.01.004.
  6. Hayashi, T. (1998), "Restoring properties of Japanese traditional wooden frame", Proceeding of the World Conference on Timber Engineering, Presses Polytechniques et Universitaires Romandes, Montreux, Switzerland, August.
  7. He, J.X., Wang, J. (2018), "Theoretical model and finite element analysis for restoring moment at column foot during rocking", J Wood Sci., 64(2), 97-111. http://doi: 10.1007/s10086-017-1677-5.
  8. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017). "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. http://doi:10.12989/sem.2017.63.2.259.
  9. Lee, D., Araki, Y. and Endo, T. (2009), "Modeling of column base for traditional timber buildings based on local compression experiments at contact surface between column base and foundation stone", J Struct. Constr. Eng., 74(639), 865-872. https://doi.org/10.3130/aijs.74.865
  10. Li, J. (2006), Ying-Tsao-Fa-Shih, China Bookstore Press, Beijing, China.
  11. Li, Y.Z., Cao, S.Y. and Xue, J.Y. (2016), "Analysis on mechanical behavior of dovetail mortise-tenon joints with looseness in traditional timber buildings", Struct. Eng. Mech., 60(5), 903-921. http://doi:10.12989/sem.2016.60.5.903.
  12. Maeda, T. (2008), "Column rocking behavior of traditional wooden buildings in Japan", The 10th World Conference on Timber Engineering, Miyazaki, January.
  13. Maeno, M., Suzuki, Y., Ohshita, T. and Kitahara, A. (2004), "Seismic response characteristics of traditional wooden frame by full-scale dynamic and static tests", The 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, August.
  14. Maeno,M., Saito, S. and Suzuki, Y. (2007), "Evaluation of equilibrium of force acting on column and restoring force due to column rocking by full scale tests of traditional wooden frames", J Struct. Constr. Eng., 615, 153-160. http://doi:10.3130/aijs.72.153_1.
  15. Razavian L., Naghipour M. and Shariati M. (2020). "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. http://doi:10.12989/sem.2020.74.1.145.
  16. Sandberg, L.B., Bulleit, W.M. and Reid, E.H. (2000), "Strength and stiffness of oak pegs in traditional timber-frame joints", J. Struct. Eng., 126(6), 717-723. http://doi:10.1061/(ASCE)0733-9445(2000)126:6(717).
  17. Suzuki, Y. and Maeno, M. (2006), "Structural mechanism of traditional wooden frames by dynamic and static tests", Struct. Control. Health. Monit. 13(1), 508-522. http://doi:10.1002/stc.153.
  18. Tang, L.N. (2015), "Study of mechanical model of column base connection and vibration strengthening in ancient timber structures", M.Sc. Dissertation, Southwest Jiaotong University, Chengdu, China.
  19. Wang, T. (1992). Static Analysis of Ancient Timber Structures, Cultural Relics Press, Beijing, China.
  20. Xie, Q., Zheng, P., Xiang, W., Cui, Y.Z. and Zhang, F.L., (2014) "Experimental study on seismic behavior of damaged straight mortise-tenon joints of ancient timber buildings", J Buildi. Struct, 35(11), 143-150. http://doi:10.14006/j.jzjgxb.2014.11.018.
  21. Xue, J.Y., Qi, L.J., Yang, K.Y. and Wu, Z.J. (2017), "Dynamic experimental study on single and double beam-column joints in steel traditional-style building", Struct. Eng. Mech., 63(5), 617-628. http://doi:10.12989/sem.2017.63.5.617.
  22. Zhang, F., Zhao, H., Xue, J., Xie, Q., Sui, Y. and Luo, Z. (2013), "Lateral load-resisting analysis and experimental verification of ancient timber based on swing-columns principle", Ind. Constr., 43(10), 54-60. http://doi:10.7617/j.issn.1000-8993.2013.10. 013.
  23. Zhang, P.C. (2003), "Study on structure and its seismic behavior development of Chinese ancient timber structure building", Ph.D Dissertation, Xi'an University of Architecture and Technology. Xi'an, China.
  24. Zhang, X.C., Xue, J.Y. and Zhao, H.T. (2011), "Study on Chinese ancient timber-frame building by shaking table test", Struct. Eng. Mech., 40(4), 453-469. http://doi:10.12989/sem.2011.40.4.453.