DOI QR코드

DOI QR Code

Effect of medium coarse aggregate on fracture properties of ultra high strength concrete

  • Karthick, B. (Department of Civil Engineering, CSI College of Engineering) ;
  • Muthuraj, M.P. (Department of Civil Engineering, Coimbatore Institute of Technology)
  • 투고 : 2019.06.19
  • 심사 : 2020.08.21
  • 발행 : 2021.01.10

초록

Ultra high strength concrete (UHSC) originally proposed by Richards and Cheyrezy (1995) composed of cement, silica fume, quartz sand, quartz powder, steel fibers, superplasticizer etc. Later, other ingredients such as fly ash, GGBS, metakaoline, copper slag, fine aggregate of different sizes have been added to original UHSC. In the present investigation, the combined effect of coarse aggregate (6mm - 10mm) and steel fibers (0.50%, 1.0% and 1.5%) has been studied on UHSC mixes to evaluate mechanical and fracture properties. Compressive strength, split tensile strength and modulus of elasticity were determined for the three UHSC mixes. Size dependent fracture energy was evaluated by using RILEM work of fracture and size independent fracture energy was evaluated by using (i) RILEM work of fracture with tail correction to load - deflection plot (ii) boundary effect method. The constitutive relationship between the residual stress carrying capacity (σ) and the corresponding crack opening (w) has been constructed in an inverse manner based on the concept of a non-linear hinge from the load-crack mouth opening plots of notched three-point bend beams. It was found that (i) the size independent fracture energy obtained by using above two approaches yielded similar value and (ii) tensile stress increases with the increase of % of fibers. These two fracture properties will be very much useful for the analysis of cracked concrete structural components.

키워드

참고문헌

  1. Abdalla, H.M. and Karihaloo, B.L. (2003), "Determination of size - independent specific fracture energy of concrete from three - point bend and wedge splitting tests", Mag. Concrete. Res., 55,133-141.https://doi.org/10.1680/macr.2003.55.2.133.
  2. Abdalla, H.M. and Karihaloo, B.L. (2004), "A method for constructing the bilinear tension softening diagram of concrete corresponding to its true fracture energy", Mag. Concrete. Res., 56, 597-604. https://doi.org/10.1680/macr.56.10.597.53679.
  3. Al-Osta, M.A. (2019), "Shear behaviour of RC beams retrofitted using UHPFRC panels epoxied to the sides", Comput. Concrete, 24, 37-49, https://doi.org/10.12989/cac.2019.24.1.037.
  4. Anoushehei, M., Daneshjoo, F., Mahboubi, S. and Khazaeli, S. (2017), "Experimental investigation on hysteretic behavior of rotational friction dampers with new friction materials", Steel Comp. Struct., 24(2), 239-248. https://doi.org/10.12989/scs.2017.24.2.239.
  5. Aydin, S., Yazici, H., Yardimci, M.Y. and Yi Giter, H. (2010), "Effect of aggregate type on mechanical properties of reactive powder concrete", ACI Materials J., 107, 441-449.
  6. Bazant, Z.P. (1996), "Analysis of work -of- fracture method for measuring fracture energy of concrete", ASCE J. Eng. Mech., 122, 138-144. https://doi.org/10.1061/(ASCE)0733-99(1996)122:2(138).
  7. Bazant, Z.P. and Kazemi, M.T. (1991), "Size dependence ofconcrete fracture energy determined by RILEM work-offracture method", J. Fracture, 51, 121-138. https://doi.org/10.1007/BF00033974
  8. Carpinteri, A. and Chiaia, B. (1996), "Size effects on concrete fracture energy: dimensional transition from order to disorder", Mater. Struct., 29, 259-266. https://doi.org/10.1007/BF02486360.
  9. Chalioris, C. E., Kosmidou, P. M. K. and Karayannis, C. G., (2019), "Cyclic Response of Steel Fiber Reinforced Concrete Slender Beams; An experimental study", Materials 12(9), 1398, https://doi.org/10.3390/ma12091398.
  10. Chalioris, C.E (2013), "Analytical approach for the evaluation of minimum fibre factor required for steel fibrous concrete beams under combined shear and flexure", Construct. Build. Mater., 43(June), 2013, 317-336, https://doi.org/10.1016/j.conbuildmat.2013.02.039
  11. Chalioris, C.E. and Panagiotopoulos, T.A. (2018), "Flexural analysis of steel fibre-reinforced concrete members", Comput. Concrete, 22(1), 11-25. https://doi.org/http://dx.doi.org/10.12989/cac.2018.22.1.011.
  12. Chalioris, C.E. and Sfiri, E.F. (2011), "Shear performance of steel fibrous concrete beams", Procedia Eng., 14(2011) 2064-2068, https://doi.org/10.1016/j.proeng.2011.07.259.
  13. Chen, B. and Liu, J. (2004), "Experimental study on AE characteristics of three point bending concrete beams", Cement Concrete Res., 34, 391-397. https://doi.org/10.1016/j.cemconres.2003.08.021.
  14. Cifuentes, H., Alcalde, M., Medina, F. (2012), "Measuring the size independent fracture energy of concrete", Strain, 49, 54-59. https://doi.org/10.1111/str.12012.
  15. Colombo, S., Main, I.G. and Forde, M.C. (2003), "Assessing damage of reinforced concrete beam using 'b-value' analysis of acoustic emission signals", ASCE J. Mater. Civil Eng., 15, 280-286. https://doi.org/10.1061/(ASCE)0899-1561(2003)15:3(280).
  16. Corinaldesi, V. and Moriconi, G. (2012), "Mechanical and thermal evaluation of Ultra-High Performance Fiber Reinforced Concretes for engineering applications", Construct. Build. Mater., 26, 289-294. https://doi.org/10.1016/j.conbuildmat.2011.06.023.
  17. Cwirzen, A., Penttala, V. and Vornanen, C. (2008), "Reactive powder based concretes: Mechanical properties, durability and hybrid use with OPC", Cement Concrete Res., 38, 1217-1226. https://doi.org/10.1016/j.cemconres.2008.03.013.
  18. Dai, Q., Ng, K., Zhou, J., Kreiger, E.L. and Ahlborn, T.M. (2012), "Theresa M. Ahlborn. Damage investigation of single-edge notched beam tests with normal strength concrete and ultra high performance concrete specimens using acoustic emission techniques", Construct. Build. Mater., 31, 231-242, https://doi.org/10.1016/j.conbuildmat.2011.12.080.
  19. Elices, M., Guinea, G.V. and Planas, J. (1992), "Measurement of the fracture energy using three-point bend tests: Part 3-Influence of cutting the P - δ tail", Mater. Struct., 25, 137-163. https://doi.org/10.1007/BF02472591.
  20. Gonzalez, D. C., Vicente, M. A. and Ahmad, S. (2015), "Effect of Cyclic Loading on the Residual Tensile Strength of Steel Fiber-Reinforced High-Strength Concrete", J. Mater. Civ. Eng., 27(9), https://doi.org/10.1061/(ASCE)MT.1943-5533.0001200.
  21. Gopalaratnam, V.S. and Shah, S.P. (1985), "Softening response of plain concrete in direct tension", ACI J., 82, 310-323.
  22. Guinea, G.V., Planas, J. and Elices, M. (1992), "Measurement of the fracture energy using three-point bend tests: Part 1-Influence of experimental procedures", Mater. Struct., 25, 212-218. https://doi.org/10.1007/BF02473065.
  23. Habel, K., Viviani, M., Denarie, E. and Bruhwiler, E. (2006), "Development of the mechanical properties of an Ultra-High Performance Fiber Reinforced Concrete (UHPFRC)", Cement Concrete Res., 36, 1362-1370. https://doi.org/10.1016/j.cemconres.2006.03.009.
  24. Hassan, A.M.T., Jones, S.W. and Mahmud, G.H., (2012), "Experimental test methods to determine the uniaxial tensile and compressive behaviour of ultra-high performance fibre reinforced concrete (UHPFRC)", Construct. Build. Mater., 37, 874-882. https://doi.org/10.1016/j.conbuildmat.2012.04.030.
  25. Hillerborg, A., Modeer, M. and Petersson, P.E. (1976), "Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements", Cement Concrete Res., 6, 773-782. https://doi.org/10.1016/0008-8846(76)90007-7.
  26. Hu, X. and Wittmann, F. (1992), "Fracture energy and fracture process zone", Mater. Struct., 25, 319-326. https://doi.org/10.1007/BF02472590.
  27. Hu, X. and Wittmann, F. (2000), "Size effect on toughness induced by crack close to free surface", Eng. Fracture Mech., 65, 209-221. https://doi.org/10.1016/S0013-7944(99)00123-X
  28. Kang, S.T. and Kim, J.K. (2011), "The relation between fiber orientation and tensile behavior in an ultra high performance fiber reinforced cementitious composites (UHPFRCC)", Cement Concrete Res., 41, 1001-1014. https://doi.org/10.1016/j.cemconres.2011.05.009
  29. Karihaloo, B.L, Abdalla, H.M. and Imjai, T. (2003), "A simple method for determining the true specific fracture energy of concrete", Mag. Concrete Res., 55, 471-481. https://doi.org/10.1680/macr.55.5.471.37590.
  30. Karihaloo, B.L. (1995), Fracture Mechanics and Structural Concrete, Longman, Addison Wesley, United Kingdom.
  31. Kitsutaka, Y. (1997), "Fracture parameters by polylinear tensions-oftening analysis", J. Eng. Mech. ASCE, 123, 444-450. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000418.
  32. Kwon, S., Zhao, Z. and Shah, S.P. (2008), "Effect of specimen size on fracture energy and softening curve of concrete: Part II. Inverse analysis and softening curve", Cement Concrete Res., 38, 1061-1069. https://doi.org/10.1016/j.cemconres.2008.03.014.
  33. Kytinou, V.K., Chalioris, C.E. and Karayannis, C.G. (2020), "Analysis of residual flexural stiffness of steel fiber-reinforced concrete beams with steel reinforcement", Materials, 13(12), 2698. https://doi.org/10.3390/ma13122698.
  34. Kytinou, V.K., Chalioris, C.E., Karayannis, C.G. and Elenas, A. (2020), "Effect of steel fibers on the hysteretic performance of concrete beams with steel reinforcement-tests and analysis", Materials, 13(13), 2923. https://doi.org/10.3390/ma13132923.
  35. Landis, E.N. (1999), "Micro-macro fracture relationships and acoustic emissions in concrete", Construct. Build. Mater., 13, 65-72. https://doi.org/10.1016/S0950-0618(99)00009-4.
  36. Leila Meraji, Hasan Afshin, KarimAbedi, (2019), "Flexural behavior of RC beams retrofitted by ultra-high performance fiber-reinforced concrete", Comput. Concrete, 24, 159-172. https://doi.org/10.12989/cac.2019.24.2.159.
  37. Li, V.C., Chan, C.M. and Leung, C.K.Y. (1987), "Experimental determination of the tension-softening relations for cementitious composites", Cement Concrete Res., 17, 441-452. http://hdl.handle.net/2027.42/84710. https://doi.org/10.1016/0008-8846(87)90008-1
  38. Lim, M.K. and Koo, T.K. (1989), "Acoustic emission from reinforced concrete beams", Mag. Concrete Res., 41, 229-234. https://doi.org/10.1680/macr.1989.41.149.229.
  39. Ma, J., Orgass, M., Dehn, F., Schmidt, D. and Tue, N.V. (2004), "Comparative investigations on ultra-high performance concrete with and without coarse aggregates", Proceedings of the International Symposium on UHPC, Kassel, Germany, September. 205-212.
  40. Meskenas, A., Kaklauskas, G., Daniunas, A., Bacinskas, D., Jakubovskis, R., Gribniak, S. and Gelazius, V. (2014), "Determination of the Stress-Crack Opening Relationship of SFRC by an Inverse Analysis", Mech. Compos. Mater., 49, 685-690. https://doi.org/10.1007/s11029-013-9385-8.
  41. Mihashi, H., Nomura, N. and Niiseki, S. (1991), "Influence of aggregate size on fracture process zone of concrete detected with three dimensional acoustic emission technique", Cement Concrete Res., 21,737-744. https://doi.org/10.1016/0008-8846(91)90168-H
  42. Mindess, S. (1984), "The effect of specimen size on the fracture energy of concrete", Cement and. Concrete Res., 14, 431-436. https://doi.org/10.1016/0008-8846(84)90062-0.
  43. Monteiro Azevedo, N. and Lemos, J.V. (2006), "Aggregate shape influence on the fracture behaviour of concrete", Struct. Eng. Mech., 24, 411-427. https://doi.org/10.12989/sem.2006.24.4.411.
  44. Muralidhara, S, Raghu Prasad, B.K, Karihaloo, B.L, Singh, R.K, (2011), "Size independent fracture energy in plain concrete beams using tri-linear model", Construct. Build. Mater., 25, 3051-3058. https://doi.org/10.1016/j.conbuildmat.2011.01.003.
  45. Muralidhara,S, Raghu Prasad, B.K, Eskandari, H, Karihaloo, B.L, (2010), "Fracture process zone size and true fracture energy of plain concrete from acoustic emission catalogue ", Construct. Build. Mater., 24, 479-486. https://doi.org/10.1016/j.conbuildmat.2009.10.014.
  46. Murthy, A.R. (2011), "Fatigue and fracture behaviour of ultra high strength concrete beams", Ph.D. Dissertation, Indian Institute of Science, Bangalore, India.
  47. Murthy, A.R., Iyer, N.R. and Prasad, B.R. (2013a), "Evaluation of mechanical properties for high strength and ultrahigh strength concretes", Adv. Concrete Construct. 1(4), 341-358, https://doi.org/10.12989/acc2013.1.4.341.
  48. Murthy, A.R., Karihaloo, B.L., Iyer, N.R. and Prasad, B.R. (2013b), "Bilinear tension softening diagrams of concrete mixes corresponding to their size-independent specific fracture energy", Construct. Build. Mater., 47,1160-1166, https://doi.org/10.1016/j.conbuildmat.2013.06.004
  49. Nallathambi, P., Karihaloo, B.L. and Heaton, B.S. (1985), "Various size effects in fracture of concrete", Cement Concrete Res., 15, 117-126. https://doi.org/10.1016/0008-8846(85)90016-X.
  50. Nanakorn, P. and Horii, H. (1996), "Back analysis of tension softening relationship of concrete", J. Mater. Concrete, Struct. Pavements JSCE, 32, 265-275.
  51. Neville, A.M. (1995), Properties of Concrete, 4th edition, Longman Scientific, London, United Kingdom.
  52. Olesen, J.F. (2001), "Fictitious crack propagation in fiber-reinforced concrete beams", J. Eng. Mech. ASCE, 127, 272-280. https://doi.org/10.1061/(ASCE)0733-9399(2001)127:3(272).
  53. Ostergaard, L. (2003), "Early-age Fracture Mechanics and Cracking of Concrete", Ph.D. Dissertation, The Technical University of Denmark, Lyngby, Denmark.
  54. Ostergaard, L. (2003), Early-age Fracture Mechanics and Cracking of Concrete, Technical University of Denmark, Lyngby, Denmark.
  55. Pan. Z. (2011), "Fracture properties of geopolymer paste and concrete", Mag. Concrete Res., 63, 763-771, https://doi.org/10.1680/macr.2011.63.10.763.
  56. Planas, J., Elices, M. and Guinea, G.V. (1992), "Measurement of the fracture energy using three-point bend tests: Part 2-Influence of bulk energy dissipation", Mater. Struct., 25, 305-312. https://doi.org/10.1007/BF02472671.
  57. Pyo, S., Kim, H.K. and Lee, B.Y. (2017), "Effects of coarser fine aggregate on tensile properties of ultra high performance concrete", Cement Concrete Compos., 84, 28-35. https://doi.org/10.1016/j.cemconcomp.2017.08.014.
  58. Raghu Prasad, B.K. And Vidya Sagar, R. (2008), "Relationship between AE Energy and Fracture Energy of Plain Concrete Beams: Experimental Study", ASCE J. Mater. Civil Eng., 20, 212-220. https://doi.org/10.1061/(ASCE)0899-561(2008)20:3(212).
  59. Ramachandra Murthy, A., Ganesh, P., Sundar Kumar. S. and Iyer, N.R., "Fracture energy and tension softening relation for nano modified concrete", Struct. Eng. Mech., 54, 1201-1216, https://doi.org/10.12989/sem.2015.54.6.1201
  60. Ramachandra Murthy, A., Karihaloo, B.L., Iyer, N.R. and Raghu Prasad, B.K. (2013), "Determination of size-independent specific fracture energy of concrete mixes by two methods", Cement Concrete Res., 50, 19-25. https://doi.org/10.1016/j.cemconres.2013.03.015.
  61. Ramachandra Murthy. A, (2011), "Fatigue and fracture behaviour of ultra high strength concrete beams, PhD thesis, Indian Institute of Science, Bangalore, India.
  62. Richard, P, Cheyrezy, M, (1995), "Composition of reactive powder concretes", Cement Concrete Res., 25 ,1501-1511. https://doi.org/10.1016/0008-8846(95)00144-2
  63. RILEM TCM (1985), "Determination of the fracture energy of mortar and concrete by means of three-point bend tests on notched beams", Mater. Struct., 18, 287-290. https://doi.org/10.1007/BF02472918.
  64. Roelfstra, P.E. and Wittmann, F.H. (1986), "Numerical method to link strain softening with failure of concrete", Fracture Toughness and Fracture Energy of Concrete, Elsevier Science, New York. 163-175.
  65. Sagar, R.V. and Prasad, B.R. (2012), "A Review of recent development in parametric based acoustic emission techniques applied to concrete structures", Nodestructive Test Evaluation, 27, 47-68. https://doi.org/10.1080/10589759.2011.589029.
  66. Sahin, Y. and Koksal, F. (2011), "The influences of matrix and steel fibre tensile strengths on the fracture energy of high strength concrete", Construct. Build. Mater., 25, 1801-1806. https://doi.org/10.1016/j.conbuildmat.2010.11.084.
  67. Stang, H. and Olesen, J.F. (1998), On the interpretation ofbending tests on FRC-materials. Proc FRAMCOS-3, Fracture Mechanics of Concrete Structures, Aedificatio Publishers, Freiburg, Germany. 511-520.
  68. Tada, H., Paris, P.C. and Irwin G.R. (1985), The Stress Analysis of Cracks Handbook, 2nd edition, Paris Productions.
  69. Ulfkjaer, J.P., Krenk, S. and Brincker, R. (1995), "Analytical model for fictitious crack propagation in concrete beams", J. Eng. Mech. ASCE, 7-15. https://doi.org/10.1061/(ASCE)0733-399(1995)121:1(7).
  70. Vydra, V., Trtik, K. and Vodak, F. (2012), "Size independent fracture energy of concrete", Construct. Build. Mater., 26, 357-361. https://doi.org/10.1016/j.conbuildmat.2011.06.034
  71. Wang, Y.J., Li, V.C. and Backer, S. (1990), "Experimental determination of tensile behaviour of fibre reinforced concrete", ACI Mater. J., 87, 461-468.
  72. Wille, K. and Boisvert-Cotulio, C. (2015), "Material efficiency in the design of ultra-high performance concrete", Construct. Build. Mater., 86, 33-43. https://doi.org/10.1016/j.conbuildmat.2015.03.087
  73. Yang, S. L., Millard, S. G., Soutsos, M. N., Barnett, S. J. and Le, T. T. (2009), "Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)", Construct. Build. Mater., 23, 2291-2298. https://doi.org/10.1016/j.conbuildmat.2008.11.012.
  74. Yoo, D. Y., Kang, S. T., Lee, J. H. and Yoon, Y. S. (2013), "Effect of shrinkage reducing admixture on tensileand flexural behaviors of UHPFRC considering fiber distribution characteristics", Cement Concrete Res., 54, 180-190. https://doi.org/10.1016/j.cemconres.2013.09.006.
  75. Yoo, D.Y., Kang, S.T. and Yoon, Y.S. (2014), "Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC", Construct. Build. Mater., 64, 67-81. https://doi.org/10.1016/j.conbuildmat.2014.08.039.
  76. Youyuan, L. and Zongjin, L. (2012), "Studyofthe relationship between concrete fracture energy and ae signal energy under uniaxial compression", ASCE J. Mater. Civil Eng., 24,538-547. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000418
  77. Yu, R., Song, Q., Wang, X., Zhang, Z., Shui, Z. and Brouwers, H.J.H. (2017), "Sustainable development of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC): Towards to an optimized concrete matrix and efficient fibre application", J. Cleaner Production, 162, 220-233, https://doi.org/10.1016/j.jclepro.2017.06.017.
  78. Yu, R., Spiesz, P. and Brouwers, H.J.H. (2014), "Mix design and properties assessment of ultra-high performance fibre reinforced concrete (UHPFRC)", Cement Concrete Res., 56, 29-39. https://doi.org/10.1016/j.cemconres.2013.11.002.
  79. Zhang, J., Leung, C. K. and Xu, S. (2010), "Evaluation of fracture parameters of concrete from ending test using inverse analysis approach", Mater. Struct., 43, 857-874. https://doi.org/10.1617/s11527-009-9552-5.
  80. Zhang, P., Gao, J.X., Dai, X.B., Zhang, T.H. and Wang, J. (2016), "Fracture behavior of fly ash concrete containing silica fume", Struct. Eng. Mech., 59, 261-275. https://doi.org/https://doi.org/10.12989/sem.2016.59.2.261.
  81. Zhao, Z., Kwon, S. and Shah, S.P. (2008), "Effect of specimen size on fracture energy and softening curve of concrete: Part I. Experiments and fracture energy", Cement Concrete Res., 38, 1049-1060. https://doi.org/10.1016/j.cemconres.2008.03.017.