DOI QR코드

DOI QR Code

A Study on the Surface Properties of Polymer Insulators for Improving Electrical Insulation Performance

전기 절연성능 향상을 위한 폴리머 애자의 표면 특성 연구

  • Park, Yong Seob (Department of Electronics, Chosun College of Science and Technology) ;
  • Bae, Jae Sung (Department of Electrical and Computer Engineering, Sungkyunkwan University) ;
  • Hong, Byungyou (Department of Electrical and Computer Engineering, Sungkyunkwan University) ;
  • Lee, Jae Hyeong (Department of Electrical and Computer Engineering, Sungkyunkwan University)
  • 박용섭 (조선이공대학교 전자과) ;
  • 배재성 (성균관대학교 전자전기컴퓨터공학과) ;
  • 홍병유 (성균관대학교 전자전기컴퓨터공학과) ;
  • 이재형 (성균관대학교 전자전기컴퓨터공학과)
  • Received : 2020.11.20
  • Accepted : 2020.11.25
  • Published : 2021.01.01

Abstract

In this paper, we investigated the surface properties of polymer insulators to improve electrical insulation performance. First, after washing the polymer insulator in various ways, its contact angle was increased, thereby improving the hydrophobic properties and electrical insulation properties. In addition, TiO2 thin films, which have been used as a photocatalytic material and have been applied to the polymer insulator surface of to enhance the surface and electrical insulating properties. For the sputtering method, the contact angle after coating the TiO2 thin film increased with increasing RF power, but it was lower compared to that before coating, indicating that the hydrophobic properties of the surface were slightly deteriorated. Consequently, the electrical properties of the polymer-insulating material were maintained or improved after the TiO2 thin-film coating.

Keywords

References

  1. J. Kim, M. K. Chaudhury, M. J. Owen, and T. Orbeck, J. Colloid Interface Sci., 244, 200 (2001). [DOI: https://doi.org/10.1006/jcis.2001.7909]
  2. C. H. Li, Y. H. Hsieh, W. T. Chiu, C. C. Liu, C. L. Kao, Sep. Purif. Technol., 58, 148 (2007). [DOI: https://doi.org/10.1016/j.seppur.2007.07.013]
  3. H. Sun, C. Wang, S. Pang, X. Li, Y. Tao, H. Tang, and M. Liu, J. Non-Cryst. Solids, 354, 1440 (2008). [DOI: https://doi.org/10.1016/j.jnoncrysol.2007.01.108]
  4. G. J. Yang, C. J. Li, Y. Y. Wang, and C. X. Li, Mater. Lett., 62, 1670 (2008). [DOI: https://doi.org/10.1016/j.matlet.2007.09.056]
  5. M. Addamo, V. Augugliaro, A. Di Paola, E. Garcia-Lopez, V. Loddo, G. Marci, and L. Palmisano, Thin Solid Films, 516, 3802 (2008). [DOI: https://doi.org/10.1016/j.tsf.2007.06.139]
  6. C. H. Heo, S. B. Lee, and J. H. Boo, Thin Solid Films, 475, 183 (2005). [DOI: https://doi.org/10.1016/j.tsf.2004.08.033]
  7. F. Meng and F. Lu, Vacuum, 85, 84 (2010). [DOI: https://doi.org/10.1016/j.vacuum.2010.04.006]
  8. P. Zeman and S. Takabayashi, Surf. Coat. Technol., 153, 93 (2002). [DOI: https://doi.org/10.1016/s0257-8972(01)01553-5]
  9. M. M. Abdel-Aziz, I. S. Yahia, L. A. Wahab, M. Fadel, and M. A. Afifi, Appl. Surf. Sci., 252, 8163 (2006). [DOI: https://doi.org/10.1016/j.apsusc.2005.10.040]
  10. M. Dhayal, J. Jun, H. B. Gu, and K. H. Park, J. Solid State Chem., 180, 2696 (2007). [DOI: https://doi.org/10.1016/j.jssc.2007.06.037]