대한치과기공학회지 (Journal of Technologic Dentistry)

  • 제43권4호
  • /
  • Pages.160-167
  • /
  • 2021
  • /
  • 1229-3954(pISSN)
  • /
  • 2288-5218(eISSN)
대한치과기공학회 (Korean Academy of Dental Technology)
권호 표지
DOI QR코드

DOI QR Code

Effects of colored zirconia surface treatment on the bond strength of veneering ceramics

  • Kim, SA-Hak (Department of Dental Laboratory Technology, Kyungdong University) ;
  • Kim, Chong-Kyen (Department of Hotel Management, Kyungdong University)
  • 투고 : 2021.12.05
  • 심사 : 2021.12.17
  • 발행 : 2021.12.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Purpose: In this study, when the etching treatment method, which is a chemical surface treatment method, is applied to colored zirconia, the shear bond strength between the veneering ceramic material and colored zirconia is compared with that without surface treatment, and the fracture type is observed to evaluate the etching treatment effect of colored zirconia. Methods: Experiments were conducted after dividing the study sample into two groups, which are the zirconia control group without surface treatment using colored zirconia blocks (without etching zirconia, NZC group) and the zirconia group treated with a commercially available etching solution (etching liquid zirconia, EZC group). Results: The mean shear bond strength of the NZC group was 20.31±2.32 Mpa, and that of the EZC group was 25.95±2.34 Mpa, and the difference between these two values was statistically significant (p<0.05). Further, the surface roughness Ra value was higher in the EZC group than in the NZC group. In the fracture pattern, cohesive fractures were dominant, and adhesive fractures and cohesive fractures were mixed. Conclusion: The bond strength was significantly higher in the group treated with colored zirconia. The fracture pattern was mostly cohesive failure in the group not treated with etching and changed to mixed failure as the etching treatment progressed.

키워드

과제정보

This research was supported by Kyungdong University Research Fund, 2021.

참고문헌

  1. McLean JW, Hughes TH. The reinforcement of dental porcelain with ceramic oxides. Br Dent J. 1965;119:251-267.
  2. Luthardt R, Weber A, Rudolph H, Schone C, Quaas S, Walter M. Design and production of dental prosthetic restorations: basic research on dental CAD/CAM technology. Int J Comput Dent. 2002;5:165-176.
  3. Kim MJ, Oh SH, Kim JH, Ju SW, Seo DG, Jun SH, et al. Wear evaluation of the human enamel opposing different Y-TZP dental ceramics and other porcelains. J Dent. 2012;40:979-988. https://doi.org/10.1016/j.jdent.2012.08.004
  4. Tinschert J, Natt G, Mautsch W, Spiekermann H, Anusavice KJ. Marginal fit of alumina-and zirconia-based fixed partial dentures produced by a CAD/CAM system. Oper Dent. 2001;26:367-374.
  5. Denry I, Kelly JR. State of the art of zirconia for dental applications. Dent Mater. 2008;24:299-307. https://doi.org/10.1016/j.dental.2007.05.007
  6. Thompson JY, Stoner BR, Piascik JR, Smith R. Adhesion/ cementation to zirconia and other non-silicate ceramics: where are we now? Dent Mater. 2011;27:71-82. https://doi.org/10.1016/j.dental.2010.10.022
  7. Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Microtensile bond strength of different components of core veneered all-ceramic restorations. Part II: zirconia veneering ceramics. Dent Mater. 2006;22:857-863. https://doi.org/10.1016/j.dental.2005.11.014
  8. Aboushelib MN, Kleverlaan CJ, Feilzer AJ. Effect of zirconia type on its bond strength with different veneer ceramics. J Prosthodont. 2008;17:401-408. https://doi.org/10.1111/j.1532-849x.2008.00306.x
  9. Potiket N, Chiche G, Finger IM. In vitro fracture strength of teeth restored with different all-ceramic crown systems. J Prosthet Dent. 2004;92:491-495. https://doi.org/10.1016/j.prosdent.2004.09.001
  10. Strub JR, Beschnidt SM. Fracture strength of 5 different all-ceramic crown systems. Int J Prosthodont. 1998;11:602-609.
  11. Derand P, Derand T. Bond strength of luting cements to zirconium oxide ceramics. Int J Prosthodont. 2000;13:131-135.
  12. Tada K, Sato T, Yoshinari M. Influence of surface treatment on bond strength of veneering ceramics fused to zirconia. Dent Mater J. 2012;31:287-296. https://doi.org/10.4012/dmj.2011-163
  13. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater. 1999;15:426-433. https://doi.org/10.1016/S0109-5641(99)00070-6
  14. Phark JH, Duarte S Jr, Blatz M, Sadan A. An in vitro evaluation of the long-term resin bond to a new densely sintered high-purity zirconium-oxide ceramic surface. J Prosthet Dent. 2009;101:29-38. https://doi.org/10.1016/S0022-3913(08)60286-3
  15. Zarone F, Sorrentino R, Vaccaro F, Traini T, Russo S, Ferrari M. Acid etching surface treatment of feldspathic, alumina and zirconia ceramics: a micromorphological SEM analysis. Int Dent S Afr. 2006;8:20-26.
  16. Devigus A, Lombardi G. Shading Vita In-ceram YZ substructures: influence on value and chroma, part II. Int J Comput Dent. 2004;7:379-388.
  17. Shah K, Holloway JA, Denry IL. Effect of coloring with various metal oxides on the microstructure, color, and flexural strength of 3Y-TZP. J Biomed Mater Res B Appl Biomater. 2008;87:329-337.