과제정보
This work was supported by Korea Institute of Planning and Evaluation for Technology in Food, Agriculture and Forestry (IPET) and Korea Smart Farm R&D Foundation (Kos Farm) through Smart Farm Innovation Technology Development Program, funded by Ministry of Agriculture, Food and Rural Affairs (MAFRA) and Ministry of Science and ICT (MSIT), Rural Development Administration (RDA) (1545024470).
참고문헌
- C. Arcoumanis, "The second european auto-oil program (AOLII)", A. F. f. Transportation, 2000.
- A. van Doorn, M. van Walwijk, "Global assessment of Dimethyl-ether as an automotive fuel (second edition)", TNO wegtransportmiddelen, 1996.
- C. Arcoumanis, C. Bae, R. Crookes, and E. Kinoshita, "The potential of di-methyl ether (DME) as an alternative fuel for compression-ignition engines. Fuel, Vol. 87, No. 7, 2008, pp. 1014-1030, doi; https://doi.org/10.1016/j.fuel.2007.06.007.
- J. Szybist, S. McLaughlin, and S. Iyer, "Emissions and performance benchmarking of a prototype dimethyl ether-fueled heavy-duty truck", ORNL, 2014. Retrieved from https://afdc.energy.gov/files/u/publication/ornl_dme_tm-2014-59.pdf.
- "Mass flow rate", NASA. Retrieved from https://www.grc.nasa.gov/www/k-12/airplane/mflow.html.
- Z. Y. Wu, H. W. Wu, and C. H. Hung, "Applying Taguchi method to combustion characteristics and optimal factors determination in diesel/biodiesel engines with port-injecting LPG", Fuel, Vol. 117, 2014, pp. 8-14, doi: https://doi.org/10.1016/j.fuel.2013.09.005.
- Taguchi G, "Introduction to quality engineering: designing quality into products and processes", MacMillan, New York, 1986.
- S. Yang and C. Lee, "Experimental research on the injection rate of DME and diesel fuel in common rail injection system by using bosch and zeuch methods", MDPI, Vol. 11, No. 2, pp. 273, doi: https://doi.org/10.3390/en11020273.
- M. Glensvig, S. C. Sorenson, and D. L. Abata, "High pressure injection of dimethyl ether", Technical University of Denmark, 1997. Retrieved from https://www.osti.gov/etdeweb/servlets/purl/618171.
- V. R. Joseph and C. F. Wu, "Performance measures in dynamic parameter design", Mathematics, 2002.
- T. Ganapathy, K. Murugesan, and R. P. Gakkhar, "Performance optimization of Jatropha biodiesel engine model using taguchi approach", Apply Energy, Vol. 86, No.11, 2009, pp. 2476-2486, doi: http://dx.doi.org/10.1016/j.apenergy.2009.02.008.
- R. G. Akay and A. B. Yurtcan, "Direct liquid fuel cells fundamentals, advances and Future", AP, 2020, pp. 177-189.
- V. Mrzljak, B. Zarkovic, and I. Poljak, "Fuel mass flow variation in direct injection diesel engine - Influence on the change of the main engine operating parameters", Pomorstvo, Vol. 31, No. 2, 2017, pp. 119-127.
- T. A. Semelsberger, R. L. Borup, and H. L. Greene, "Dimethyl ether (DME) as an alternative fuel", Journal of Power Sources, Vol. 156, No. 2, pp. 497-511, doi: https://doi.org/10.1016/j.jpowsour.2005.05.082.