DOI QR코드

DOI QR Code

Effect of Laser Processing Patterns on the Bonding Interface Quality during Laser Sintering of Magnesium Alloys with Zirconia

마그네슘 합금 표면의 지르코니아 분말 레이저 소결과정에서 조사 패턴이 접합 계면 품질에 미치는 영향

  • Yoon, Sangwoo (Department of Mechanical Engineering, Seoul National University of Science & Technology) ;
  • Kim, Joohan (Department of Mechanical Engineering, Seoul National University of Science & Technology)
  • 윤상우 (서울과학기술대학교 기계공학과) ;
  • 김주한 (서울과학기술대학교 기계공학과)
  • Received : 2020.10.11
  • Accepted : 2020.11.27
  • Published : 2021.02.28

Abstract

The quality of the ceramic sintered coating on a metal surface through laser surface treatment is affected by the laser irradiation pattern. Depending on the laser irradiation pattern, the amount of residual stress and heat applied or accumulated on the surface increases or decreases, affecting the thickness attained in the ceramic sintering area. When the heat energy accumulated in the sintering area is high, the ceramic and the metal alloy melt and sufficiently mix to form a homogeneous and thick bonding interface. In this study, the thermal energy accumulation in the region sintered with zirconia was controlled using four types of laser processing patterns. The thickness of the diffusion region is analyzed by laser-induced breakdown spectroscopy of Mg-ZrO2 generated by laser sintering zirconia powder on the magnesium alloy surface. On the basis of the analysis of the Mg and Zr present in the sintered region through LIBS, the effect of the irradiation pattern on the sintering quality is confirmed by comparing and analyzing the heat and mass transfer tendency of the diffusion layer and the degree of diffusion according to the irradiation pattern. The derived diffusion coefficients differed by up to 9.8 times for each laser scanning pattern.

Keywords

References

  1. Jo, Y. K., Yu, J. H., Jeong, H. S., and Park S. H., "Improving the Formability of an SUS316 Plate using Laser-induced Surface Heat Treatment and Cladding Processes," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 19, No. 2, pp. 30-37, 2020.
  2. Jung, D. H. and Kim, H. J., "A Study on Surface Characteristics of High Tensile Brass with Molybdenum Flame Spray Treatment," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 6, pp. 38-45, 2018. https://doi.org/10.14775/ksmpe.2018.17.6.038
  3. Lee, C. T., "Enlargement of anti-corrosion of Zinc plating by the trivalent chromium sulfate conversion coating," Applied Chemistry for Engineering, Vol. 18, No. 3, pp. 296-302, 2007.
  4. Kim, H. T. and Kim, I., "Molybdate Chemical Conversion Coating of Electro-Galvanized Steel," Journal of The Korean Institute of Surface Engineering, Vol. 37, No. 4, pp. 200-207, 2004.
  5. Shishkovsky, I., Yadroitsev, I., Bertrand, P. and Smurov, I., "Alumina zirconium ceramics - synthesis by selective laser sintering/melting," Applied Surface Science, Vol. 254, No. 4, pp. 966-970, 2007. https://doi.org/10.1016/j.apsusc.2007.09.001
  6. Yoon, S., Kim, J. H., Park, W. T. and Kim, J., "Analysis of Laser Sintering of Zirconia to Magnesium Alloy by Laser-Induced Plasma Spectroscopy," Nanoscience and Nanotechnology Letters, Vol. 10, No. 5-6, pp. 790-795, 2018. https://doi.org/10.1166/nnl.2018.2726
  7. Yoon, S., Kang, D. and Kim, J., "Laser Surface Treatment of Magnesium Alloy using ZrO2 for Corrosion Resistance," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15, No. 4, pp. 93-100, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.093
  8. Bian, P., Shi, J., Liu, Y. and Xie, Y., "Influence of laser power and scanning strategy on residual stress distribution in additively manufactured 316L steel," Optics & Laser Technology, Vol. 132, pp. 106477, 2020. https://doi.org/10.1016/j.optlastec.2020.106477
  9. Choi, S. D., Cheong, S. H., Kim, G. M., Yang, S. C. and Kim, J. G., "Characteristics of metal surface heat treatment by diode laser," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 6, No. 3, pp. 16-23, 2007.
  10. Rusak, D. A., Castle, B. C., Smith, B. W. and Winefordner, J. D., "Fundamentals and applications of laser-induced breakdown spectroscopy," Critical Reviews in Analytical Chemistry, Vol. 27, No. 4, pp. 257-290, 1997. https://doi.org/10.1080/10408349708050587
  11. Kang, D., Yoon, S. and Kim, J., "Evaluation of stress on metal surfaces by laser-induced breakdown spectroscopy," Journal of Micromechanics and Microengineering, Vol. 29, No. 12, pp. 125008, 2019. https://doi.org/10.1088/1361-6439/ab4b7f