DOI QR코드

DOI QR Code

A Study on the Analysis of Injection Molding of F-theta Lens

에프세타 렌즈의 사출 성형 해석에 관한 연구

  • Park, Yong-Woo (Department of Convergence Mechanical Engineering, Gyeongsang National University) ;
  • Moon, Sung-Min (School of Mechanical & Aerospace Engineering, Gyeongsang National University) ;
  • Lyu, Sung-Ki (School of Mechanical & Aerospace Engineering, Gyeongsang National University)
  • 박용우 (경상대학교 융합대학원 융합기계공학과) ;
  • 문성민 (경상대학교 기계항공공학부) ;
  • 류성기 (경상대학교 기계항공공학부)
  • Received : 2020.08.23
  • Accepted : 2020.09.12
  • Published : 2021.01.31

Abstract

In this study, we investigate the injection molding of f-theta lens, an important element of the laser scanning unit of laser printers and scanning systems. The f-theta lens is an aspherical plastic lens that must be molded with a precision of seconds. An injection molding method is often used for mass producing aspherical plastic lenses at a low cost. In the injection molding process, costs related to forming and injection are included. Therefore, in this study, to determine the shrinkage and deformation of injection molded f-theta lens, we predict the pressure and temperature distributions. Further, based on the analysis of the predictions, we maximize the design efficiency and verify the cost and development period reduction.

Keywords

References

  1. Noh, M. J., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "System Design for Laser Scanning Unit using A3", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 71-72, 2011.
  2. Yoo, K. S., Hyun, D. H., Chang, H. S., Park, Y. W., and Park, C. Y., "Injection Molding of a Laser Scanning Unit Optical System", Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 11, No. 4, pp. 102-103, 2011.
  3. Lim, C. S., "The effect analysis of birefringence of plastic f-theta Iens on the beam diameter", Korean Journal of Optics and Photonics, Vol. 11, No. 2, pp. 73-79, 2000.
  4. Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 11, pp. 163-170, 2004.
  5. Lee, D. K., Yang, Y. S, Kim, S. S., Kim, H. J., and Kim, J. H., "Development of F theta Lens for Laser Scanning Unit", Journal of the Korean Physical Society, Vol. 53, Issue. 915, pp. 2527-2530, 2008. https://doi.org/10.3938/jkps.53.2527
  6. Lee, D. H., Park, S. H., "Design and Development of F-theta Lens for 1064 nm Laser", J Korean Ophthalmic Opt Soc, Vol. 21, No. 4, pp. 401-407, 2016. https://doi.org/10.14479/jkoos.2016.21.4.401
  7. Jeong, I. S., Ban, M. S, Son,, K. E., and Lee, B. B, "Development of F-theta Lens for Laser Scanning Unit", Trans. Korean Soc. Mech. Eng. C, Vol. 1, No. 1, pp. 13-19, 2013.
  8. Park, K., and Han, C. Y., "Numerical Analysis for the Injection Molding of an Aspheric Lens for a Photo Pick-up Device", Journal of the Korean Society of Precision Engineering, Vol. 21, No. 11, pp. 163-170, 2004.
  9. Bringans, R. D., "Application of Blue Diode Lasers to Printing", Proc. of Materials Research Society Symposium, Vol. 482, pp. 1203-1210, 1998.
  10. Ye, K. H., Choi, H. W., "Laser Head Design and Heat Transfer Analysis for 3D Patterning", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 15 No. 4, pp. 46-50, 2016. https://doi.org/10.14775/ksmpe.2016.15.4.046
  11. Carmina, L., William, T. P. and Peter, P. C., "Athermalization of a Single-Component Lens with Diffractive Optics", Applied Optics, Vol. 32, No. 13, pp. 2295-2302, 1993. https://doi.org/10.1364/AO.32.002295
  12. Kazuo, M., "Historical Review and Future Trends of Scanning Optical Systems for Laser Beam Printers", Proc. of SPIE, Vol. 1987, pp. 264-273, 1993.
  13. Kim, S. Y., Park, B. G., Jung, J. O., Cho, K. S., and Chung I. S., "Metal Injection Molding Analysis for Developing Embroidering Machine Rotary Hooks", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 4, pp.160-168, 2018.
  14. Donald, C., Thomas, J., Alan, D. and Dennis, W., "Diffractive Optics: Design, Fabrication, and Test", SPIE press, pp. 57-82, 2003.