Steel and Composite Structures

  • 제38권1호
  • /
  • Pages.17-31
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Experimental and numerical investigation on post-earthquake fire behaviour of the circular concrete-filled steel tube columns

  • Wang, Yu-Hang (School of Civil Engineering, Chongqing University) ;
  • Tang, Qi (CISDI ENGINEERING CO., LTD) ;
  • Su, Mei-Ni (Department of Mechanical, Aerospace and Civil Engineering, University of Manchester) ;
  • Tan, Ji-Ke (School of Civil Engineering, Chongqing University) ;
  • Wang, Wei-Yong (School of Civil Engineering, Chongqing University) ;
  • Lan, Yong-Sen (CSIC HaiZhuang Wind power Co., Ltd) ;
  • Deng, Xiao-Wei (Department of Civil Engineering, The University of Hong Kong) ;
  • Bai, Yong-Tao (School of Civil Engineering, Chongqing University) ;
  • Luo, Wei (CSIC HaiZhuang Wind power Co., Ltd) ;
  • Li, Xiao-Hua (School of Civil Engineering, Chongqing University) ;
  • Bai, Jiu-Lin (School of Civil Engineering, Chongqing University)
  • 투고 : 2019.09.21
  • 심사 : 2020.12.12
  • 발행 : 2021.01.10
⟨ 이전 논문 다음 논문 ⟩

초록

Post-earthquake fire is a common disaster which causes serious safety issues to infrastructures. This study aims to investigate the residual loading capacities of circular concrete-filled steel tube (CFST) columns under post-earthquake fire experimentally and numerically. The experimental programme contains two loading steps - pre-damage cyclic loading at room temperature and transient state tests with constant compression loads. Three finite element models are developed and validated against the test results. Upon validation, a total of 48 numerical results were generated in the parametric study to investigate the effects of thickness and strengths of steel tube, axial compression ratio and damage degree on the fire resistance of circular CFST columns. Based on the analysis on experimental and numerical results, the loading mechanism of circular CFST columns is discussed. A design method is proposed for the prediction of fire resistance time under different seismic pre-damage and compression loads. The predictions by the new method is compared with the newly generated experimental and numerical results and is found to be accurate and consistent with the mean value close to the unity and a coefficient of variation around 1%.

키워드

과제정보

The research is supported by the Fok Ying Tung Education Foundation (171066), the Fundamental Research Funds for the Central Universities (2019CDQYTM028), 111Project (B18062), Chongqing Science and Technology Bureau (cstc2019jcyj-zdxm0088) and Open Project of Key Laboratory of New Technology for Construction of Cities in Mountain Area (LNTCCMA-20200106).

참고문헌

  1. ABAQUS (2014), ABAQUS/Standard Version 6.14 User's Manual vols. I-III, Dassault Systemes Simulia Corp, Rhode Island, USA.
  2. BS EN 1993-1-2:2005 (2005), Design of steel structures, part 1-2: general rules-structural fire design, British Standards Institution.
  3. Cai, Y. and Young, B. (2018), "Bearing resistance design of stainless steel bolted connections at ambient and elevated temperatures", Steel Compo. Struct., 29(2), 273-286. http://dx.doi.org/10.12989/scs.2018.29.2.273
  4. CECS 200:2006. (2006), Technical specification for fire prevention of steel structures in buildings, China Association for Engineering Construction Standardization; Beijing, China.
  5. Chen, Z., Liu, X. and Zhou, W. (2018), "Residual bond behavior of high strength concrete-filled square steel tube after elevated temperatures", Steel Compo. Struct., 27(4), 509-523. http://dx.doi.org/10.12989/scs.2018.27.4.509.
  6. Dennis, L., Yang, J. and Dai, X.H. (2019), "Finite element analysis of concrete filled lean duplex stainless steel columns", Structures, 21, 150-155. https://doi.org/10.1016/j.istruc.2019.01.024.
  7. Elnaz, T., Manfred, K. and Sascha H. (2018), "The performance of concrete filled steel tube columns under post-earthquake fires", J. Constr. Steel Res., 150(8), 115-128. https://doi.org/10.1016/j.jcsr.2018.07.013.
  8. Espinos, A., Romero, M.L. and Hospitaler, A. (2010), "Advanced model for predicting the fire response of concrete filled tubular columns", J. Constr. Steel Res., 66(8), 1030-46. https://doi.org/10.1016/j.jcsr.2010.03.002.
  9. Espinos, A., Romero, M.L. and Hospitaler, A. (2012), "Simple calculation model for evaluating the fire resistance of unreinforced concrete filled tubular columns", Eng. Struct., 42, 231-244. https://doi.org/10.1016/j.engstruct.2012.04.022.
  10. GB/T 9978.1-2008. (2008), Fire resistance test methods for building elements-part 1: general requirements, National standard of the People's Republic of China; Beijing, China.
  11. Gernay, T., Millard, A. and Franssen J.M. (2013), "A multiaxial constitutive model for concrete in the fire situation: theoretical formulation", Int. J. Solid. Struct., 50(22-23), 3659-3673. https://doi.org/10.1016/j.ijsolstr.2013.07.013.
  12. Han, L.H. (2007), Theory and practice of concrete-filled steel tube structure, (2th edition), Science Press, Beijing, China.
  13. Han, L.H. and Yang, Y.F. (2005), "Cyclic performance of concrete-filled steel CHS columns under flexural loading", J. Constr. Steel Res., 61(4), 423-452. https://doi.org/10.1016/j.jcsr.2004.10.004.
  14. Hass, R. (1991), On realistic testing of the fire protection technology of steel and cement supports, Translation BHPR/NL/T/1444, Melbourne, Australia.
  15. He, A., Liang, Y. and Zhao, O. (2020), "Behaviour and residual compression resistances of circular high strength concrete-filled stainless steel tube (HCFSST) stub columns after exposure to fire", Eng. Struct., 203, 109897. https://doi.org/10.1016/j.engstruct.2019.109897.
  16. Hong S. and Varma A.H. (2009), "Analytical modeling of the standard fire behavior of loaded CFT columns", J. Constr. Steel Res., 65(1), 54-69. https://doi.org/10.1016/j.jcsr.2008.04.008.
  17. Ibanez, C., Bisby, L., Rush, D., Romero, M.L. and Hospitaler, A. (2019), "Post-heating response of concrete-filled steel tubular columns under sustained loads", Structures, 21, 90-102. https://doi.org/10.1016/j.istruc.2019.04.003.
  18. Ibanez, C., Romero, M.L. and Hospitaler, A. (2013), "Fiber beam model for fire response simulation of axially loaded concrete filled tubular columns", Eng. Struct., 56, 182-193. https://doi.org/10.1016/j.engstruct.2013.05.004.
  19. Imani, R., Mosqueda, G. and Bruneau, M. (2015), "Experimental Study on Post-Earthquake Fire Resistance of Ductile Concrete-Filled Double-Skin Tube Columns", ASCE, 141(8), 92-101. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001168.
  20. Imani, R., Mosqueda, G. and Bruneau, M. (2015), "Finite Element Simulation of Concrete-Filled Double-Skin Tube Columns Subjected to Postearthquake Fires", ASCE, 141(12), 55-69. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001301.
  21. ISO 834-1. (1999), Fire Resistance Tests-Elements of Building Construction, Part 1: General Requirements, International Organization for Standardization ISO 834, Geneva, Switzerland.
  22. JGJ/T 101-2015. (2015), Specification for seismic test of buildings, China Architecture & Building Press, Beijing, China.
  23. Kwon, I.K. and Kwon, Y.B. (2014), "Structural stability of firer-esistant steel (FR490) H-section columns at elevated temperatures", Steel Compos. Struct., 17(1), 105-121. https://doi.org/10.12989/scs.2014.17.1.105.
  24. Li, G.Q., Han, L.H., Lou, G.B. and Jiang, S.C. (2006), Fire Resistance Design of Steel Structure And Steel-concrete Composite Structure, China Building Industry Press, Beijing, China.
  25. Li, Q., Wang, W.D. and Mao, W.J. (2017), "Finite element analysis of concrete-filled circular steel tubular columns subjected to post-earthquake fire", J. Build. Struct., 38(S1), 118-125.
  26. Lie T.T. and Kodur V.K.R. (1996), "Fire Resistance of Steel Columns Filled with Bar-Reinforced Concrete", J. Struct. Eng., 122(1), 30-36. https://doi.org/10.1061/(ASCE)0733-9445(1996)122:1(30).
  27. Model Code 90. (1993), CEB-FIP. Lausanne, Mai.
  28. Neuenschwander, M., Knobloch, M. and Fontana, M. (2016), "Suitability of the damage-plasticity modelling concept for concrete at elevated temperatures: Experimental validation with uniaxial cyclic compression tests", Cement Concrete Res., 79(1), 57-75. https://doi.org/10.1016/j.cemconres.2015.07.013.
  29. Neuenschwander, M., Knobloch, M. and Fontana, M. (2017), "Modeling thermo-mechanical behavior of concrete-filled steel tube columns with solid steel core subjected to fire", Eng. Struct., 136, 180-193. https://doi.org/10.1016/j.engstruct.2017.01.017.
  30. Neuenschwander, M., Knobloch, M. and Fontana, M. (2017), "ISO Standard Fire Tests of Concrete-Filled Steel Tube Columns with Solid Steel Core", J. Struct. Eng., 143(4), 04016211. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001695.
  31. Neuenschwander, M., Knobloch, M. and Fontana, M. (2017), "Generic model stress-strain relationship for concrete in compression at elevated temperatures", ACI Mater. J., 114(1), 3-14. https://doi.org/10.14359/51689468.
  32. Neuenschwander, M., Scandella, C., Knobloch, M. and Fontana, M. (2018), "Experimental validation of the damage-plasticity modeling concept for normal strength concrete in fire", J. Struct. Fire Eng., 9(1), 53-62. https://doi.org/10.1108/jsfe-01-2017-0001.
  33. Song, Q.Y., Amin, H., Zhao, X.L. and Han, L.H. (2017), "Post-earthquake fire performance of flange-welded/web-bolted steel I-beam to hollow column tubular connections", Thin-Wall. Struct., 116, 113-123. https://doi.org/10.1016/j.tws.2017.03.012.
  34. Su, M.N., Young, B. and Gardner, L. (2014), "Deformation-based design of aluminium alloy beams", Eng. Struct., 80, 339-349. https://doi.org/10.1016/j.engstruct.2014.08.034.
  35. Tang, C.W. (2018), "Fire resistance of high strength concrete filled steel tubular columns under combined temperature and loading", Steel Compos. Struct., 27(2), 243-253. https://dx.doi.org/10.12989/scs.2018.27.2.243
  36. Thomas, J., and Sandeep, T.N. (2018), "Experimental study on circular CFST short columns with intermittently welded stiffeners", Steel Compos. Struct., 29(5), 659-667. https://dx.doi.org/10.12989/scs.2018.29.5.659.
  37. Tomii, M. and Sakino, K. (1979), "Elasto-plastic behavior of concrete filled square steel tubular beam-columns", Transactions of the Architectural Institute of Japan, 280, 111-120. https://doi.org/10.3130/aijsaxx.280.0_111.
  38. Wang, Y.C. (2000), "A simple method for calculating the fire resistance of concrete-filled CHS columns", J. Constr. Steel Res., 54(3), 365-386. https://doi.org/10.1016/S0143-974X(99)00061-9.
  39. Wang, Y.H., Tang, Q. and Nie, X. (2017), "Comparative investigation on influences of concrete material constitutive models on structural behavior", Constr. Build. Mater., 144, 475-483. https://doi.org/10.1016/j.conbuildmat.2017.03.174.
  40. Xu, L.H., Yang, D.L. and Li, Z.X. (2011), "Strain and energy ratio-based damage model of a steel structure", J. Vib. Shock, 30(7), 218-222. https://doi.org/10.1088/0253-6102/55/2/31.
  41. Zhou, K. and Han, L.H., (2019), "Modelling the behaviour of concrete-encased concrete-filled steel tube (CFST) columns subjected to full-range fire", Eng. Struct., 183, 265-280. https://doi.org/10.1016/j.engstruct.2018.12.100.
  42. Zhou, K. and Han, L.H. (2018), "Experimental performance of concrete-encased CFST columns subjected to full-range fire including heating and cooling", Eng. Struct., 165, 331-348. https://doi.org/10.1016/j.engstruct.2018.03.042.