Journal of the Korean Society of Manufacturing Process Engineers (한국기계가공학회지)

The Korean Society of Manufacturing Process Engineers (한국기계가공학회)
권호 표지
DOI QR코드

DOI QR Code

Robust Design Methodology for Utility Dependent Design Attributes

효용 종속인 설계 속성의 강건설계

  • Kim, Kyung-Mo (School of Industrial Engineering, Kumoh National Institute of Technoloy)
  • 김경모 (금오공과대학교 산업공학부)
  • Received : 2021.09.23
  • Accepted : 2021.10.19
  • Published : 2021.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

The ever-growing demand for enhanced competitiveness of engineered systems require designing in quality strategies that can efficiently incorporate multiple design attributes into a system. In a robust design, there must be consideration for any uncontrollable factors that should not be disregarded in the design process. Studies on multi-attribute design challenges usually assume mutual utility independence amongst the design attributes. However, mutual utility independence does not exist in every design situation. In this study, a new robust design methodology that has two utility-dependent attributes are presented. The proposed method was then compared with a traditional robust design that utilizes a wave soldering process design. The results of this case study indicate that the proposed method yields a better solution than the traditional method.

Keywords

Acknowledgement

본 연구는 금오공과대학교 교수연구년제에 의하여 연구된 실적물

References

  1. Lind, E. E., Goldin, J., and Hickman, J. B., "Fitting Yield and Cost Response Surfaces", Chemical Engineering Progress, Vol. 56, pp. 62-68, 1960.
  2. Del, C., and Montgomery, D. C., "A Nonlinear Programming Solution to the Dual Response Problem", Journal of Quality Technology, Vol. 25, No. 3, pp. 199-204, 1993. https://doi.org/10.1080/00224065.1993.11979454
  3. Khuri, A. I. and Conlon, M., "Simultaneous Optimization of Multiple Responses Represented by Polynomial Regression Functions", Technometrics, Vol. 23, No. 2, pp. 363-375, 1981. https://doi.org/10.1080/00401706.1981.10487681
  4. Ames, A. E., Mattucci, N., MacDonald, S., Szonyi, G., and Hawkins, D. M., "Quality Loss Functions for Optimization Across Multiple Response Surfaces", Journal of Quality Technology, Vol. 29, No. 3, pp. 339-346, 1997. https://doi.org/10.1080/00224065.1997.11979775
  5. Kim, K. M., and Park, J. C., "Robust Design of Injection Molding Process Considering Integrated Desirability", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 10, pp. 34-41, 2019.
  6. Thurston, D. L., Carnahan, J. V., and Liu, T., "Optimization of Design Utility", ASME Journal of Mechanical Design, Vol. 116, No. 3, pp. 801-808, 1994. https://doi.org/10.1115/1.2919453
  7. Kim, K. M., Yin, J. J., and Park, J. C., "Optimization of Sheet Metal Forming Process Based on Two-Attribute Robust Design Methodology", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 2, pp. 55-63, 2014. https://doi.org/10.14775/ksmpe.2014.13.2.055
  8. Fichitali, J., Van De Voort, F. R. and Khuri, A. I., "Multiresponse Optimization of Acid Casein Production", Journal of Food Process Engineering, Vol. 12, pp. 247-258, 1990. https://doi.org/10.1111/j.1745-4530.1990.tb00053.x
  9. Morgenstern, O., and Von Neumann, J., The Theory of Games and Economic Behavior, Princeton University Press, NJ, 1947.
  10. Keeney, R. L. and Raiffa, H., Decisions with Multiple Objectives : Preference and Value Tradeoffs, John Wiley & Sons Inc., NY, pp. 232-235, and pp. 243-246, 1976.
  11. Peace, G. S., Taguchi Methods, Addition-Wesley, MA, pp. 1-12, pp. 418-422, 1993.
  12. Clausing, D. P., "Operating Window: An Engineering Measure for Robustness", Technometrics, Vol. 46, No. 1, pp. 25-29, 2004. https://doi.org/10.1198/004017004000000077
  13. Maruthi, B. N., and Joseph, V. R., "Improving the Yield of Printed Circuit Boards Using Design of Experiments", Quality Engineering, Vol. 12, No. 2, pp. 259-265, 1999. https://doi.org/10.1080/08982119908962583
  14. Mori, T., Taguchi Techniques for Image and Pattern Development Technology, Prentice-Hall, NJ, 1995.
  15. Kim, K., Yin, J. J., and Suh, Y. S., "Application of Operating Window to Robust Process Optimization of Sheet Metal Forming", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 8, No. 4, pp. 110-121, 2009.
  16. Minitab, Minitab Inc., State College, PA, 2020.