DOI QR코드

DOI QR Code

The determination of effect of TiO2 on dynamic behavior of scaled concrete structure by OMA

  • Tuhta, Sertac (Ondokuz Mayis University, Faculty of Engineering, Department of Civil Engineering)
  • 투고 : 2020.02.07
  • 심사 : 2021.10.06
  • 발행 : 2021.12.25

초록

In this article, the dynamic parameters (frequencies, mode shapes, damping ratios) of the scaled concrete structure and the dynamic parameters (frequencies, mode shapes, damping ratios) of the entire outer surface of titanium dioxide, 80 micron in thickness are compared using operational modal analysis method. Ambient excitation was provided from micro tremor ambient vibration data on ground level. Enhanced Frequency Domain Decomposition (EFDD) was used for the output only modal identification. From this study, a good correlation between mode shapes was found. Titanium dioxide applied to the entire outer surface of the scaled concrete structure has an average of 11.78% difference in frequency values and 10.15% in damping ratios, proving that nanomaterials can be used to increase rigidity in structures, in other words, for reinforcement. Another important result determined in the study was the observation of the adherence of titanium dioxide and similar nanomaterials mentioned in the introduction to concrete structure surfaces was at the highest level.

키워드

참고문헌

  1. Akbas, S.D. (2020), "Modal analysis of viscoelastic nanorods under an axially harmonic load", Adv. Nano Res., 8(4), 277-282. https://doi.org/10.12989/anr.2020.8.4.277.
  2. Aliev, F.A. and Larin, V.B. (1998), Optimization of Linear Control Systems: Analytical Methods and Computational Algorithms, CRC Press.
  3. Alvin, K.F. and Park, K.C. (1994), "Second-order structural identification procedure via state-space-based system identification", AIAA J., 32(2), 397-406. https://doi.org/10.2514/3.11997.
  4. ANSI S2.47 (1990), Vibration of buildings-guidelines for the measurement of vibrations and evaluation of their effects on buildings, American National Standards Institute; Washington, DC, U.S.A.
  5. ARTeMIS Extractor, (1999), Structural Vibration Solutions, Aalborg, Denmark.
  6. Balmes, E. (1997), "New results on the identification of normal modes from experimental complex modes", Mech. Syst. Signal Pr., 11(2), 229-243. https://doi.org/10.1006/mssp.1996.0058.
  7. Bendat, J.S. (1998), Nonlinear Systems Techniques and Applications, Wiley.
  8. Brincker, R., Zhang, L. and Andersen, P. (2000), "Modal identification from ambient responses using frequency domain decomposition", Proceedings of the 18th International Modal Analysis Conference (IMAC), San Antonio, Texas, USA, February.
  9. Civalek, O., Uzun, B. and Yayli, M.O. (2020), "Frequency, bending and buckling loads of nanobeams with different cross sections", Adv. Nano Res., 9(2), 91-104. https://doi.org/10.12989/anr.2020.9.2.091.
  10. Eltaher, M.A., Almalki, T.A., Ahmed, K.I. and Almitani, K.H. (2019), "Characterization and behaviors of single walled carbon nanotube y quivalent-continuum mechanics approach", Adv. Nano Res., 7(1), 39-49. https://doi.org/10.12989/anr.2020.9.1.059.
  11. Eren, M. and Aydogdu, M. (2018), "Finite strain nonlinear longitudinal vibration of nanorods", Adv. Nano Res., 6(4), 323-337. https://doi.org/10.12989/anr.2018.6.4.323.
  12. Ibrahim, S.R. (1977), "Random decrement technique for modal identification of structures", J. Spacecraft. Rockets, 14(11), 696-700. https://doi.org/10.2514/3.57251.
  13. Jacobsen, N.J., Andersen, P., and Brincker, R. (2006), "Using enhanced frequency domain decomposition as a robust technique to harmonic excitation in operational modal analysis", Proceeding of International Conference on Noise and Vibration Engineering (ISMA), Leuven, Belgium, September.
  14. Juang, J.N. (1994), Applied System Identification, Prentice Hall.
  15. Kalman, R.E. (1960), "A new approach to linear filtering and prediction problems", J. Basic Eng., 82(1), 35-45. https://doi.org/10.1115/1.3662552.
  16. Kasimzade, A.A. and Tuhta, S. (2017), "Application of OMA on the bench-scale earthquake simulator using micro tremor data", Struct. Eng. Mech., 61(2), 267-274. https://doi.org/10.12989/sem.2017.61.2.267.
  17. Kasimzade, A.A. and Tuhta, S. (2017), "OMA of model steel structure retrofitted with CFRP using earthquake simulator", Earthq. Struct., 12(6), 689-697. https://doi.org/10.12989/eas.2017.12.6.689.
  18. Ljung, L. (1999), System Identification: Theory for the User, Prentice Hall.
  19. Lus, H., De Angelis, M., Betti, R. and Longman, R.W. (2003), "Constructing second-order models of mechanical systems from identified state space realizations. Part I: Theoretical discussions", J. Eng. Mech., 129(5), 477-488. https://doi.org/10.1061/(ASCE)0733-9399(2003)129:5(477).
  20. Ma, B., Li, H., Li, X., Mei, J. and Lv, Y. (2016), "Influence of nano-TiO2 on physical and hydration characteristics of fly ash-cement systems", Constr. Build. Mater., 122, 242-253. https://doi.org/10.1016/j.conbuildmat.2016.02.087.
  21. Marwala, T. (2010), Finite Element Model Updating Using Computational Intelligence Techniques: Applications to Structural Dynamics, Springer Science-Business Media.
  22. Pandey, H.K., Hirwani, C.K., Sharma, N., Katariya, P.V., Dewangan, H.C. and Panda, S.K. (2019), "Effect of nano glass cenosphere filler on hybrid composite eigenfrequency responses-An FEM approach and experimental verification", Adv. Nano Res., 7(6), 419-429. https://doi.org/10.12989/anr.2019.7.6.419.
  23. Peeters, B. (2000), "System identification and damage detection in civil engineering", Ph.D. Dissertation, Katholieke Universiteit Leuven, Leuven, Belgium.
  24. Roeck, G.D. (2003), "The state-of-the-art of damage detection by vibration monitoring: the SIMCES experience", J. Struct. Control, 10(2), 127-134. https://doi.org/10.1002/stc.20.
  25. Sestieri, A. and Ibrahim, S.R. (1994), "Analysis of errors and approximations in the use of modal coordinates", J. Sound Vib., 177(2), 145-157. https://doi.org/10.1006/jsvi.1994.1424.
  26. Trifunac, M.D. (1972), "Comparisons between ambient and forced vibration experiments", Earthq. Eng. Struct. D., 1(2), 133-150. https://doi.org/10.1002/eqe.4290010203.
  27. Tseng, D.H., Longman, R.W. and Juang, J.N. (1994), "Identification of the structure of the damping matrix in second order mechanical systems", Spaceflight Mech., 167-190.
  28. Tuhta, S. (2018), "GFRP retrofitting effect on the dynamic characteristics of model steel structure", Steel and Compos. Struct., 28(2), 223-231. https://doi.org/10.12989/scs.2018.28.2.223.
  29. Tuhta, S. (2019), "OMA of model chimney using Bench-Scale earthquake simulator", Earthq. Struct., 16(3), 321-327. https://doi.org/10.12989/eas.2019.16.3.321.
  30. Uzun, B. and Civalek, O. (2019), "Free vibration analysis Silicon nanowires surrounded by elastic matrix by nonlocal finite element method", Adv. Nano Res., 7(2), 99-108. https://doi.org/10.12989/anr.2019.7.2.099.
  31. Wang, L., Guo, F., Lin, Y., Yang, H. and Tang, S.W. (2020a), "Comparison between the effects of phosphorous slag and fly ash on the CSH structure, long-term hydration heat and volume deformation of cement-based materials", Constr. Build. Mater., 250, 118807. https://doi.org/10.1016/j.conbuildmat.2020.118807.
  32. Wang, L., Luo, R., Zhang, W., Jin, M. and Tang, S. (2020b), "Effects of fineness and content of phosphorus slag on cement hydration, permeability, pore structure and fractal dimension of concrete", Fractals, 29(2), 2140004. https://doi.org/10.1142/S0218348X21400041.
  33. Wang, L., Jin, M., Wu, Y., Zhou, Y. and Tang, S. (2021a), "Hydration, shrinkage, pore structure and fractal dimension of silica fume modified low heat Portland cement-based materials", Constr. Build. Mater., 272, 121952. https://doi.org/10.1016/j.conbuildmat.2020.121952.
  34. Wang, L., He, T., Zhou, Y., Tang, S., Tan, J., Liu, Z. and Su, J. (2021b), "The influence of fiber type and length on the cracking resistance, durability and pore structure of face slab concrete", Constr. Build. Mater., 282, 122706. https://doi.org/10.1016/j.conbuildmat.2021.122706.
  35. Zhang, P., Wang, K., Wang, J., Guo, J., Hu, S. and Ling, Y. (2020), "Mechanical properties and prediction of fracture parameters of geopolymer/alkali-activated mortar modified with PVA fiber and nano-SiO2", Ceram. Int., 46(12), 20027-20037. https://doi.org/10.1016/j.ceramint.2020.05.074.
  36. Zhang, P., Gao, Z., Wang, J. and Wang, K. (2021), "Numerical modeling of rebar-matrix bond behaviors of nano-SiO2 and PVA fiber reinforced geopolymer composites", Ceram. Int., 47(8), 11727-11737. https://doi.org/10.1016/j.ceramint.2021.01.012.