DOI QR코드

DOI QR Code

Two-dimensional curved panel vibration and flutter analysis in the frequency and time domain under thermal and in-plane load

  • Moosazadeh, Hamid (Department of Aerospace Engineering, Tarbiat Modares University) ;
  • Mohammadi, Mohammad M. (Faculty of mechanics, Malek Ashtar University of technology)
  • Received : 2019.12.16
  • Accepted : 2021.05.26
  • Published : 2021.07.25

Abstract

The analysis of nonlinear vibrations, buckling, post-buckling, flutter boundary determination and post-flutter behavior of a homogeneous curved plate assuming cylindrical bending is conducted in this article. Other assumptions include simply-supported boundary conditions, supersonic aerodynamic flow at the top of the plate, constant pressure conditions below the plate, non-viscous flow model (using first- and third-order piston theory), nonlinear structural model with large deformations, and application of mechanical and thermal loads on the curved plate. The analysis is performed with constant environmental indicators (flow density, heat, Reynolds number and Mach number). The material properties (i.e., coefficient of thermal expansion and modulus of elasticity) are temperature-dependent. The equations are derived using the principle of virtual displacement. Furthermore, based on the definitions of virtual work, the potential and kinetic energy of the final relations in the integral form, and the governing nonlinear differential equations are obtained after fractional integration. This problem is solved using two approaches. The frequency analysis and flutter are studied in the first approach by transferring the handle of ordinary differential equations to the state space, calculating the system Jacobin matrix and analyzing the eigenvalue to determine the instability conditions. The second approach discusses the nonlinear frequency analysis and nonlinear flutter using the semi-analytical solution of governing differential equations based on the weighted residual method. The partial differential equations are converted to ordinary differential equations, after which they are solved based on the Runge-Kutta fourth- and fifth-order methods. The comparison between the results of frequency and flutter analysis of curved plate is linearly and nonlinearly performed for the first time. The results show that the plate curvature has a profound impact on the instability boundary of the plate under supersonic aerodynamic loading. The flutter boundary decreases with growing thermal load and increases with growing curvature.

Keywords

References

  1. Abbas, L.K., Rui, X., Marzocca, P., Abdalla, M. and De Breuker, R. (2011), "A parametric study on supersonic/hypersonic flutter behavior of aero-thermo-elastic geometrically imperfect curved skin panel", Acta Mechanica, 222(1), 41-57. https://doi.org/10.1007/s00707-011-0525-8.
  2. Amirzadegan, S., Safavi, S.M.M. and Jafarzade, A. (2019), "Supersonic panel flutter analysis assuming effects of initial structural stresses", J. Inst. Eng. India Ser. C, 100(5), 833-839. https://doi.org/10.1007/s40032-019-00532-y.
  3. Amirzadegan, S. and Dowell, E.H. (2020), "Nonlinear limit cycle oscillation and flutter analysis of clamped curved plates", J. Aircraft, 57(2), 368-376. https://doi.org/10.2514/1.C035716.
  4. Azzouz, M.S., Przekop, A., Guo, X. and Mei, C. (2003), "Nonlinear flutter of shallow shell under yawed supersonic flow using FEM", Proceedings of the 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Virginia, U.S.A., April.
  5. Azzouz, M., Guo, X., Przekop, A. and Mei, C. (2004), "Nonlinear flutter of cylindrical shell panels under yawed supersonic flow using FE", Proceedings of the 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, California, U.S.A., April.
  6. Azzouz, M. and Mei, C. (2005), "Nonlinear flutter of cylindrical panels under yawed supersonic flow using finite elements", Proceedings of the 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Texas, U.S.A., April.
  7. Azzouz, M. (2009), "Flow angle effects on supersonic flutter of clamped curved panels", Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 17th AIAA/ASME/AHS Adaptive Structures Conference 11th AIAA, California, U.S.A., May.
  8. Birman, V., Bert, C.W. and Elishakoff, I. (1990), "Effect of aerodynamic heating on deformation of composite cylindrical panels in a gas flow", Compos. Struct., 15(3), 259-273. https://doi.org/10.1016/0263-8223(90)90034-C.
  9. Cao, L., Yao, G. (2019), "Hopf bifurcation of heated panels flutter in supersonic flow", Mathematics, 7(9), 787. https://doi.org/10.3390/math7090787.
  10. Epureanu, B.I., Tang, L.S. and Pai doussis, M.P. (2004), "Coherent structures and their influence on the dynamics of aeroelastic panels", Int. J. Non Linear Mech., 39(6), 977-991. https://doi.org/10.1016/S0020-7462(03)00090-8
  11. Fazelzadeh, S.A. (2007), "Chaotic behavior of nonlinear curved-panel in a supersonic flow", Dynam. Cont. Dis.Ser. B, 14(6), 793.
  12. Gee, D.J. and Sipcic, S.R. (1999), "Coupled thermal model for nonlinear panel flutter", AIAA J., 37(5), 642-650. https://doi.org/10.2514/2.765.
  13. Ghoman, S., Azzouz, M. and Mei, C. (2009), "Time domain method for nonlinear flutter of curved panels under yawed supersonic flow at elevated temperature", Proceedings of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference 17th AIAA/ASME/AHS Adaptive Structures Conference 11th AIAA No (p. 2598), California, U.S.A., May.
  14. Kouchakzadeh, M.A., Rasekh, M. and Haddadpour, H. (2010), "Panel flutter analysis of general laminated composite plates", Compos. Struct., 92(12), 2906-2915. https://doi.org/10.1016/j.compstruct.2010.05.001.
  15. Krause, H. and Dinkler, D. (1998), "The influence of curvature on supersonic panel flutter", Proceedings of the 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference and Exhibit, Califirnia, U.S.A., April
  16. Librescu, L., Marzocca, P. and Silva, W.A. (2002), "Supersonic/hypersonic flutter and postflutter of geometrically imperfect circular cylindrical panels", J. Spacecraft Rockets, 39(5), 802-812. https://doi.org/10.2514/2.3882.
  17. Miller, B.A., McNamara, J.J., Spottswood, S.M. and Culler, A.J. (2011), "The impact of flow induced loads on snap-through behavior of acoustically excited, thermally buckled panels", J. Sound Vib., 330(23), 5736-5752. https://doi.org/10.1016/j.jsv.2011.06.028.
  18. Muc, A., Flis, J. and Augustyn, M. (2019), "Optimal design of plated/shell structures under flutter constraints-A literature review", Materials, 12(24), 4215. https://doi.org/10.3390/ma12244215.
  19. Nydick, I., Friedmann, P. and Zhong, X. (1995), "Hypersonic panel flutter studies on curved panels", Proceedings of the 36th Structures, Structural Dynamics and Materials Conference, Los Angeles, U.S.A., April.
  20. Pany, C. and Parthan, S. (2003), "Flutter analysis of periodically supported curved panels", J. Sound Vib., 267(2), 267-278. https://doi.org/10.1016/S0022-460X(02)01493-1.
  21. Reddy, J.N. (2003), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis. CRC press.
  22. Singha, M.K. and Mandal, M. (2008), "Supersonic flutter characteristics of composite cylindrical panels", Compos. Struct., 82(2), 295-301. https://doi.org/10.1016/j.compstruct.2007.01.007.
  23. Yang, C., Li, G. and Wan, Z. (2012), "Aerothermal-aeroelastic two-way coupling method for hypersonic curved panel flutter", Sci. China Technol. Sci., 55(3), 831-840. https://doi.org/10.1007/s11431-011-4722-4.
  24. Yang, T.Y. and Han, A.D. (1976), "Flutter of thermally buckled finite element panels", AIAA J., 14(7), 975-977. https://doi.org/10.2514/3.7173.
  25. Zhou, X., Wang, L., Jiang, J., Su, Z. (2019), "Hypersonic aeroelastic response of elastic boundary panel based on a modified fourier series method", International Journal of Aerospace Engineering, 13, 5164026. https://doi.org/10.1155/2019/5164026.